ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 26    No. 11    November 2016

Structural Materials

1
Effect of magnesium on dispersoid strengthening of Al-Mn-Mg-Si (3xxx) alloys
Zhen LI, Zhan ZHANG, X-Grant CHEN
2
Localized dissolution initiated at single and clustered intermetallic particles during immersion of Al-Cu-Mg alloy in sodium chloride solution
Chen LUO, Xiaorong ZHOU, George E. THOMPSON
3
Effect of Mg addition on mechanical and thermoelectrical properties of Al-Al2O3 nanocomposite
A. WAGIH
4
Dry wear behavior of rheo-casting Al-16Si-4Cu-0.5Mg alloy
Zhao-hua HU, Guo-hua WU, Jia XU, Wen-fei MO, Yan-lei LI, Wen-cai LIU, Liang ZHANG, Wen-jiang DING, Jonathan QUAN, Yuan-Wei CHANG
5
Effect of corrosive environment on fatigue property and crack propagation behavior of Al 2024 friction stir weld
Lei WANG, Li HUI, Song ZHOU, Liang XU, Bo HE
6
Microstructure and property of stress aged Al-Cu single crystal under various applied stresses
Ji-qiang CHEN, Zhi-guo CHEN, Xiao-bin GUO, Jie-ke REN, Yun-lai DENG
7
Dynamic tensile behaviors of AZ31B magnesium alloy processed by twin-roll casting and sequential hot rolling
Ping ZHOU, Elmar BEEH, Meng WANG, Horst E. FRIEDRICH
8
Effect of flow velocity on corrosion behavior of AZ91D magnesium alloy at elbow of loop system
Jing TIAN, Hua-liang HUANG, Zhi-quan PAN, Hong ZHOU
9
Mechanical properties of strengthened surface layer in Ti-6Al-4V alloy induced by wet peening treatment
Kang LI, Xue-song FU, Guo-qing CHEN, Wen-long ZHOU, Zhi-qiang LI
10
Hot deformation behavior and microstructural evolution of beta C titanium alloy in β phase field
Xin XU, Li-min DONG, Hong-bo BA, Zhi-qiang ZHANG, Rui YANG
11
Effects of hot compression on carbide precipitation behavior of Ni-20Cr-18W-1Mo superalloy
Yin-ben HAN, Xiang-yi XUE, Tie-bang ZHANG, Rui HU, Jin-shan LI
12
Prediction of central bursting defects in rod extrusion process with upper bound analysis method
Amir PARGHAZEH, Heshmatollah HAGHIGHAT

Functional Materials

13
Thermal expansion behavior, microhardness and electrochemical corrosion resistance properties of Au52Cu27Ag17-x(NiZn0.5)x alloys
Ke-chang SHEN, Gui-hua LI, Wei-min WANG
14
Synthesis of nickel aluminate nanoceramic compound from aluminum and nickel carbonate by mechanical alloying with subsequent annealing
M. JAVANMARDI, R. EMADI, H. ASHRAFI
15
High-temperature glassy-ceramic sealants SiO2-Al2O3-BaO-MgO and SiO2-Al2O3-ZrO2-CaO-Na2O for solid oxide electrochemical devices
S. Qi, N. M. Porotnikova, M. V. Ananyev, A. V. Kuzmin, V. A. Eremin, A. A. Pankratov, N. G. Molchanova, O. G. Reznitskikh, A. S. Farlenkov, E. G. Vovkotrub, Yu. P. Zaikov
16
Effect of sintering atmosphere on corrosion resistance of Ni/(NiFe2O4-10NiO) cermet inert anode for aluminum electrolysis
Zhong-liang TIAN, Wei-chang GUO, Yan-qing LAI, Kai ZHANG, Jie LI
17
Rheological behavior of ZnO suspension with thermosensitive poly(N-isopropylacrylamide) for colloidal processing of ceramics
Yue-hua SUN, Chao-qun PENG, Xiao-feng WANG, Ri-chu WANG, Yan FENG, Nai-guang WANG
18
Preparation of Mo(Si,Al)2 feedstock used for air plasma spraying
Hui-dong HOU, Xian-jin NING, Quan-sheng WANG, Bin GAO, Yan-bo LIU, Ying LIU
19
Fabricating multifunctional polymeric nanofilm capable of resisting corrosion and activating copper surface by electrochemical and hydrolysis-condensation approach
Ya-bin WANG, Yu-dong HUANG, Yu-tai QI
20
Catalytic reduction of SO2 by CO over CeO2-TiO2 mixed oxides
Li ZHANG, Yi-hong QIN, Bai-zhen CHEN, Ya-guang PENG, Han-bing HE, Yi YUAN
21
Effect of ball peening of substrate on microstructure, phase evolution and properties of electrophoretically deposited YSZ/(Ni, Al) composite coatings
Shan-guang SONG, Shi-lei TAN, Xiao-xiao QI, Wei WANG, Li-li WANG
22
Electrodeposition and corrosion resistance of Ni-P-TiN composite coating on AZ91D magnesium alloy
Ya-ru ZHOU, Shan ZHANG, Lin-lin NIE, Ze-jie ZHU, Jian-qing ZHANG, Fa-he CAO, Jun-xi ZHANG

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

23
Relocation method of microseismic source in deep mines
Lin-qi HUANG, Xi-bing LI, Long-jun DONG, Chu-xuan ZHANG, Dong LIU
24
NMR research on deterioration characteristics of microscopic structure of sandstones in freeze-thaw cycles
Jie-lin LI, Ke-ping ZHOU, Wei-jie LIU, Hong-wei DENG
25
Improving zinc recovery by thermoacidophilic archaeon Acidianus copahuensis using tetrathionate
Camila CASTRO, Edgardo R. DONATI
26
Reaction mechanisms of low-grade molybdenum concentrate during calcification roasting process
Min GAN, Xiao-hui FAN, Xu-ling CHEN, Cheng-qian WU, Zhi-yun JI, Song-rong WANG, Guo-jing WANG, Guan-zhou QIU, Tao JIANG
27
Column leaching process of rare earth and aluminum from weathered crust elution-deposited rare earth ore with ammonium salts
Zheng-yan HE, Zhen-yue ZHANG, Jun-xia YU, Zhi-gao XU, Yuan-lai XU, Fang ZHOU, Ru-an CHI
28
Control of zinc corrosion in acidic media: Green fenugreek inhibitor
Shimaa M. ALI, Hamedh A. Al LEHAIBI
29
Mechanism of boron removal from Si-Al melt by Ar-H2 gas mixtures
Jing-wei LI, Xiao-long BAI, Bo-yuan BAN, Qiu-xiang HE, Jian CHEN
30
Isothermal section of Al-Ti-Zr ternary system at 1073 K
Kai-li Lü, Feng YANG, Zhi-yun XIE, Hua-shan LIU, Ge-mei CAI, Zhan-peng JIN
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)