ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 26    No. 10    October 2016

Structural Materials

1
Grain boundary pre-precipitation and its contribution to enhancement of corrosion resistance of Al-Zn-Mg alloy
Hui-zhong LI, San-cheng YAO, Xiao-peng LIANG, Yong-hui CHEN, Chao LIU, Lan HUANG
2
Effect of homogenization annealing on microstructure, composition and mechanical properties of 7050/6009 bimetal slab
Guang-yuan YAN, Feng MAO, Fei CHEN, Zhi-qiang CAO, Tong-min WANG
3
Effects of annealing process on sagging resistance of cold-rolled three-layer Al alloy clad sheets
Yuan-yuan ZHAO, Zhen-yan ZHANG, Li JIN, Jie DONG
4
Effect of twin-roll casting parameters on microstructure and mechanical properties of AA5083-H321 sheet
A. HOSEINIFAR, S. SALARI, M. SOLTAN ALI NEZHAD
5
Effect of Mg on nucleation process of recrystallization in Al-Mg-Si/SiCp composite
Bin LI, Bing-hui LUO, Ke-jian HE, Wen-li FAN
6
Influence of welding parameters on fracture toughness and fatigue crack growth rate in friction stir welded nugget of 2024-T351 aluminum alloy joints
Danial GHAHREMANI MOGHADAM, Khalil FARHANGDOOST
7
Effect of welding parameters on semisolid stir welding of Mg-9Al-1Zn magnesium alloy
V. A. HOSSEINI, H. AASHURI, A. H. KOKABI
8
Fatigue behavior of AZ31B magnesium alloy electron beam welded joint based on infrared thermography
Hong-wei YANG, Ze-qin CUI, Wen-xian WANG, Bing-she XU, Hai-ying XU
9
Oxidation resistance of Si-coated TZM alloy prepared through combined process of plasma spray and laser surface melting
Jeong-Min KIM, Tae-Hyung HA, Joon-Sik PARK, Hyun-Gil KIM
10
Properties and microstructure of Ti6Al4V by deformation accelerated low temperature plasma nitriding
Yu-dong FU, Xiao-shuo ZHU, Zi-feng LI, Ke LENG

Functional Materials

11
Effects of aspect ratio and loading rate on room-temperature mechanical properties of Cu-based bulk metallic glasses
An-hui CAI, Yong LIU, Hong WU, Da-wei DING, Wei-ke AN, Guo-jun ZHOU, Yun LUO, Yong-yi PENG, Xiao-song LI
12
Effects of melt overheating degree on undercooling degree and amorphous forming of Nd9Fe85-xTi4C2Bx (x=10, 12) magnetic alloys
Meng-lin YANG, Jing PAN, Xin-cai LIU, Xiao-yan XIAO, Yu-yong ZHAN
13
Microstructure and mechanical properties of WC-Co, WC-Co-Cr3C2 and WC-Co-TaC cermets fabricated by spark plasma sintering
P. SIWAK, D. GARBIEC
14
Microstructures and properties of Al-50%SiC composites for electronic packaging applications
Fei TENG, Kun YU, Jie LUO, Hong-jie FANG, Chun-li SHI, Yi-long DAI, Han-qing XIONG
15
Effect of ZrC-SiC content on microstructure and ablation properties of C/C composites
Jun LI, Xin YANG, Zhe-an SU, Liang XUE, Ping ZHONG, Shuai-peng LI, Qi-zhong HUANG, Hong-wei LIU
16
Application of pre-alloyed powders for diamond tools by ultrahigh pressure water atomization
Zhi-qiang CHU, Xue-yi GUO, Dong-hua LIU, Yan-xian TAN, Dong LI, Qing-hua TIAN
17
Effect of glass fibre (GF) addition on microstructure and tensile property of GF/Pb composites fabricated by powder metallurgy
Yao-hong GENG, Peng-hu WANG
18
Mechanical properties of Cu matrix composite fabricated by extrusion process
Ji-Hun PAK, Gwi-Nam KIM, Sung-Gu HWANG,Beom-Su KIM, Jung-Pil NOH, Sun-Chul HUH
19
Influence of synthesis temperature on electrochemical performance of polyoxomolybdate as cathode material of lithium ion battery
Wen-liang LI, Er-fu NI, Xin-hai LI, Hua-jun GUO
20
One-pot synthesis of poly vinyl alcohol (PVA) supported silver nanoparticles and its efficiency in catalytic reduction of methylene blue
P. SAGITHA, K. SARADA, K. MURALEEDHARAN
21
Preparation and characterization of MWCNTs/LDHs nanohybrids for removal of Congo red from aqueous solution
Ya-ling LONG, Jin-gang YU, Fei-peng JIAO, Wei-jie YANG

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

22
Mechanical model for failure modes of rock and soil under compression
Lian-sheng TANG, Hai-tao SANG, Jing SONG, Zhen-gui LUO, Yin-lei SUN
23
Three-dimensional orebody modelling and intellectualized longwall mining for stratiform bauxite deposits
Shao-feng WANG, Xi-bing LI, Shan-yong WANG, Qi-yue LI, Chong CHEN, Fan FENG, Ying CHEN
24
Separation of W and Mo from their peroxoacids solutions by thermal decomposition
Wen-juan ZHANG, Jiang-tao LI, Zhong-wei ZHAO, Fei LI
25
Anodic dissolution behavior of zirconium in Bun4NBr-containing isopropanol solution
Xi-yun YANG, Hai-qiang HUANG, Sheng-hai YANG
26
Theoretical simulation and experimental study of hydrolysis separation of SbCl3 in complexation-precipitation system
Qing-hua TIAN, Yun-tao XIN, Li YANG, Xue-hai WANG, Xue-yi GUO
27
Two-step sintering of magnesium aluminate spinels and their corrosion in Na3AlF6-AlF3-CaF2-Al2O3 bath
Jian-hua LIU, Xiao-jun Lü, Jie LI, Ling-yun HU, Liang-xing JIANG
28
Liquid phase separation and subsequent dendritic solidification of ternary Fe35Cu35Si30 alloy
Sheng-bao LUO, Wei-li WANG, Zhen-chao XIA, Bing-bo WEI
29
Sessile drop evaluation of high temperature copper/spinel and slag/spinel interactions
E. de WILDE, I. BELLEMANS, M. CAMPFORTS, M. GUO, B. BLANPAIN, N. MOELANS, K. VERBEKEN
30
Structural changes and volatility correlation in nonferrous metal market
Dan WU, Zhen-hua HU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)