ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 26    No. 6    June 2016

Structural Materials

1
Stress corrosion cracking behaviour of 7xxx aluminum alloys:A literature review
A. C. UMAMAHESHWER RAO, V. VASU, M. GOVINDARAJU, K. V. SAI SRINADH
2
Influence of thermomechanical treatments on localized corrosion susceptibility and propagation mechanism of AA2099 Al-Li alloy
Yan-long MA, Xiao-rong ZHOU, Xiao-min MENG, Wei-jiu HUANG, Yi LIAO, Xiao-li CHEN, Ya-nan YI, Xin-xin ZHANG, G. E. THOMPSON
3
Effect of pre-deformation on microstructures and mechanical properties of high purity Al-Cu-Mg alloy
Hui-zhong LI , Ruo-mei LIU, Xiao-peng LIANG, Min DENG, Hui-juan LIAO, Lan HUANG
4
Dynamic recrystallization behavior of 7085 aluminum alloy during hot deformation
Dong-feng LI, Duan-zheng ZHANG, Sheng-dan LIU, Zhao-jun SHAN, Xin-ming ZHANG, Qin WANG, Su-qi HAN
5
Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites produced using stir casting
J. JEBEEN MOSES, I. DINAHARAN, S. JOSEPH SEKHAR
6
Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
Biljana Bobi?, Jelena Bajat, Ilija Bobi?, Bore Jegdi?
7
Effect of laser shock processing on erosive resistance of 6061-T6 aluminum
J. IBARRA, E. RODRíGUEZ, O. JIMéNEZ, G. GóMEZ-ROSAS, M. FLORES, J. VERDUZCO, J. CHáVEZ
8
Correction of buckling distortion by ultrasonic shot peening treatment for 5A06 aluminum alloy welded structure
Ya-zhang HE, Dong-po WANG, Ying WANG, Hai ZHANG
9
Reverse deep drawability of 5A06 aluminum alloy plate at elevated temperatures
Zhi-chao ZHANG, Yong-chao XU, Shi-jian YUAN
10
Hot bend assisted gas forming of AA5083 sheet for making V-shaped trough containing deep uneven concavities
Jung-Sung TANG, Shyong LEE
11
Microstructure and properties of Al/Cu bimetal in liquid-solid compound casting process
Yuan HU, Yi-qing CHEN, Li LI, Huan-dong HU, Zi-ang ZHU
12
Microstructural evolution and phase transformation during partial remelting of in-situ Mg2Sip/AM60B composite
Su-qing ZHANG, Ti-jun CHEN, Fa-liang CHENG, Lei-liang LI
13
Microstructure, mechanical and bio-corrosion properties of as-extruded Mg-Sn-Ca alloys
Chao-yong ZHAO, Fu-sheng PAN, Hu-cheng PAN
14
Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy
Ke WANG, Miao-quan LI
15
Hot workability of cast and wrought Ni-42Cu alloy through hot tensile and compression tests
M. ARJMAND, S. M. ABBASI, A. KARIMI TAHERI, A. MOMENI
16
Microstructure and phase precipitate behavior of Inconel 740H during aging
Yan GUO, Tai-jiang LI, Cai-xia WANG, Shu-fang HOU, Bo-han WANG
17
Microstructural investigation and castability anticipation in modern Ti/Al/Nb-containing nickel-based superalloys
Homam NAFFAKH-MOOSAVY

Functional Materials

18
Combined effect of isothermal annealing and pre-compression on mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass
Ji GU, Li-xin ZHANG, Yi-han WANG, Song NI, Sheng-feng GUO, Min SONG
19
Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating
Hong WU, Xiao-dong LAN, Yong LIU, Fei LI, Wei-dong ZHANG, Zi-jin CHEN, Xiong-fei ZAI, Han ZENG
20
Effect of 10% Si addition on cathodic arc evaporated TiAlSiN coatings
Li-hui ZHU, Cheng SONG, Wang-yang NI, Yi-xiong LIU
21
Evaluation of three kinds of MCrAlY coatings produced by electrospark deposition
Yu-jiang XIE, De WANG, Ming-sheng WANG, Wei YE
22
Structural and optoelectronic properties of AZO thin films prepared by RF magnetron sputtering at room temperature
Yi-hua SUN, Hai-lin WANG, Jian CHEN, Liang FANG, Lei WANG
23
Drop failure modes of Sn-3.0Ag-0.5Cu solder joints in wafer level chip scale package
Ming-liang HUANG, Ning ZHAO, Shuang LIU, Yi-qian HE
24
Luminescent properties of Lu2MoO6:Eu3+ red phosphor for solid state lighting
Li LI, Jun SHEN, Xian-ju ZHOU, Yu PAN, Wen-xuan CHANG, Qi-wei HE, Xian-tao WEI

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

25
Petrogenesis of skarn in Shizhuyuan W-polymetallic deposit, southern Hunan, China:Constraints from petrology, mineralogy and geochemistry
Yong-sheng CHENG
26
Leaching kinetics of zinc silicate in ammonium chloride solution
Sheng-hai YANG, Hao LI, Yan-wei SUN, Yong-ming CHEN, Chao-bo TANG, Jing HE
27
Recovery of titanium from undissolved residue (tionite) in titanium oxide industry via NaOH hydrothermal conversion and H2SO4 leaching
Fan-cheng MENG, Tian-yan XUE, Ya-hui LIU, Guo-zhi ZHANG, Tao QI
28
Electrodeposition of cobalt in double-membrane three-compartment electrolytic reactor
Jian ZHOU, San-fan WANG, Xiao-san SONG
29
Effects of electrolyte recycling on desulfurization from bauxite water slurry electrolysis
Ai-jing Lü, Yi-qi SHEN, Xu-zhong GONG, Zhi WANG, Yu-hua WANG, Ming-yong WANG
30
Copper corrosion in hot and dry atmosphere environment in Turpan, China
De-cheng KONG, Chao-fang DONG, Yue-hua FANG, Kui XIAO, Chun-yun GUO, Gang HE, Xiao-gang LI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)