ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 26    No. 4    April 2016

Structural Materials

1
Characteristics evolution of 6009/7050 bimetal slab prepared by direct-chill casting process
Guang-yuan YAN, Feng MAO, Fei CHEN, Wei WU, Zhi-qiang CAO, Tong-min WANG, Ting-ju LI
2
Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties
N. RADHIKA, R. RAGHU
3
Wearing resistance of in-situ Al-based composites with different SiO2/C/Al molar ratios fabricated by reaction hot pressing
El Oualid MOKHNACHE, Gui-song WANG, Lin GENG
4
Effects of high temperature pre-straining on natural aging and bake hardening response of Al-Mg-Si alloys
Zhi-hong JIA, Li-peng DING, Yao-yao WENG, Zhang WEN, Qing LIU
5
Production of grain-refined AC7A Al-Mg alloy via solidification in ultrasonic field
W. KHALIFA, Y. TSUNEKAWA
6
Effect of T7951 secondary aging treatment on crack propagation behavior of 7055 aluminum alloy
Song ZHOU, Lei WANG, Li-yang XIE, Li HUI, Liang XU
7
Hot deformation behavior of homogenized Al-3.2Mg-0.4Er aluminum alloy
Jian PENG, Yong-jian WANG, Li-ping ZHONG, Long-fei PENG, Fu-sheng PAN
8
Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy
M. AMNE ELAHI, S. G. SHABESTARI
9
Strain rate-dependent high temperature compressive deformation characteristics of ultrafine-grained pure aluminum produced by ECAP
Ying YAN, Yue QI, Li-jia CHEN, Xiao-wu LI
10
Fracture energy evaluation on 7075-T651 aluminum alloy welds determined by instrumented impact pendulum
R. R. AMBRIZ, D. JARAMILLO, C. GARCíA, F. F. CURIEL
11
Effect of pin profile and process parameters on microstructure and mechanical properties of friction stir welded Al-Cu joints
M. FELIX XAVIER MUTHU, V. JAYABALAN
12
Microstructure and mechanical properties of pulsed laser welded Al/steel dissimilar joint
Jin YANG, Yu-long LI, Hua ZHANG
13
Dynamic recrystallization behavior of burn resistant titanium alloy Ti-25V-15Cr-0.2Si
Shi-qiang LU, De-lai OUYANG, Xia CUI, Ke-lu WANG
14
Effect of electrochemical state on corrosion-wear behaviors of TC4 alloy in artificial seawater
Jun CHEN, Qing ZHANG
15
Preparation of micro-nanostructure on titanium implants and its bioactivity
Rui Zhang, Yi Wan , Xing Ai,Teng Wang, Bo Men
16
Microstructure and mechanical properties of Fe-doped NiAl-28Cr-6Mo eutectic alloys
A. GUNGOR, H. DEMIRTAS
17
Hot deformation behavior of spray forming LSHR alloy using constitutive equation and processing map
Yi XU, Jie WANG
18
Effect of strain rate and deformation temperature on strain hardening and softening behavior of pure copper
Shu-hai HUANG, Da-yu SHU, Chuan-kai HU, Shi-feng ZHU

Computational Materials Science and Numerical Modelling

19
Thermodynamic assessment of Ni-Yb binary system
Dai-man ZHU, Chang-rong LI, Cui-ping GUO, Zhen-min DU, Jun-qin LI
20
Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy
Yi-chuan SHAO, Tao TANG, Da-yong LI, Guo-wei ZHOU, Shao-rui ZHANG, Ying-hong PENG
21
Quantitative calculation on atomic site occupation during precipitation of Ni3(Al1-xFex) by microscopic phase-field study
Hai-hong LIAO, Min-jie LIANG, Pei-kang BAI
22
Constitutive equations of 1060 pure aluminum based on modified double multiple nonlinear regression model
Pan LI, Fu-guo LI, Jun CAO, Xin-kai MA, Jing-hui LI
23
Modeling constitutive relationship of 6013 aluminum alloy during hot plane strain compression based on Kriging method
Gang XIAO, Qin-wen YANG, Luo-xing LI
24
Identification of constitutive model parameters for nickel aluminum bronze in machining
Zhong-tao FU, Wen-yu YANG, Si-qi ZENG, Bu-peng GUO, Shu-bing HU

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

25
Flotation of low-grade bauxite using organosilicon cationic collector and starch depressant
Xin-yang YU, Hao-lin WANG, Qiang-qiang WANG, Bo FENG, Hong ZHONG
26
Separation of manganese from calcium and magnesium in sulfate solutions via carbonate precipitation
Qing-quan LIN, Guo-hua GU, Hui WANG, Chong-qing WANG, You-cai LIU, Ren-feng ZHU, Jian-gang FU
27
Influence of sodium silicate on manganese electrodeposition in sulfate solution
Jian-rong XUE, Hong ZHONG, Shuai WANG, Chang-xin LI, Fang-fang WU
28
Reaction pathway and kinetics of CdO nanoparticles prepared from CdCO3 precursor using thermal decomposition method
Gholam Reza KHAYATI, Seyed Hadi SHAHCHERAGHI, Vahid LOTFI, Esmael DAREZARESHKI
29
In situ investigation of atmospheric corrosion behavior of PCB-ENIG under adsorbed thin electrolyte layer
Pan YI, Kui XIAO, Kang-kang DING, Gang LI, Chao-fang DONG, Xiao-gang LI
30
High temperature oxidation behavior of Ti(Al,Si)3 diffusion coating on γ-TiAl by cold spray
Ji-qiang WANG, Ling-yan KONG, Tie-fan LI, Tian-ying XIONG
31
Oxidation behavior of RE-modified nickel-based superalloy between 950 °C and 1150 °C in air
Long-fei LIU, Shu-sen WU, Yang CHEN, Shu-lin Lü
32
Bimodal-grained Ti fabricated by high-energy ball milling and spark plasma sintering
Yan LONG, Wen-jing GUO, Ying LI
33
Low frequency damping behavior associated with sintering process in Al powder compact
Gang-ling HAO, Xian-yu LI, Wei-guo WANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)