ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 26    No. 2    February 2016

Structural Materials

1
Evolution of secondary phases and properties of 7B04 aluminum alloy during DC homogenization
Li-zi HE, Pin-feng JIA, Lin ZHANG, Jian-zhong CUI
2
Effects of reciprocating extrusion process on mechanical properties of AA 6061/SiC composites
Veysel ERTURUN, M. Baki KARAMI?
3
Ductility and hardness of chloride cleaned AA6011/SiCp composites
S. O. ADEOSUN, E. I. AKPAN, O. P. GBENEBOR, S. A. BALOGUN
4
Effects of reinforcement on wear resistance of aluminum matrix composites
A. PRAMANIK
5
Three-point bending performance of a new aluminum foam composite structure
Ning-zhen WANG, Xiang CHEN, Ao LI, Yan-xiang LI, Hua-wei ZHANG, Yuan LIU
6
Hot deformation behavior of high Ti 6061 Al alloy
Wei CHEN, Ying-ping GUAN, Zhen-hua WANG
7
Dislocation mechanism for dynamic recrystallization in twin-roll casting Mg–5.51Zn–0.49Zr magnesium alloy during hot compression at different strain rates
Zhi-yi LIU, Tian-tian HUANG, Wen-juan LIU, Sukbong KANG
8
Compressive anisotropy of extruded Mg-Dy-Zn alloy sheet
Xiao-mei LUO, Guang-li BI, Jing JIANG, Ming LI, Rong-guang LI, Yuan-dong LI, Ying MA, Yuan HAO
9
Thermal stability of nanocrystalline Mg-based alloys prepared via mechanical alloying
M. RAJABI, R. M. SEDIGHI, S. M. RABIEE
10
Wear behavior of Mg-10Y-4Gd-1.5Zn-0.4Zr alloy
Mao-liang HU, Qu-dong WANG, Ze-sheng JI, Hong-yu XU, Ming-de XIN, Guo-rui MA
11
Deformation behavior of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with two initial microstructures during hot working
Jiao LUO, Lian LI, Miao-quan LI
12
Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C
Yi-wen LIU, Rui HU, Tie-bang ZHANG
13
Segregation of niobium in laser cladding Inconel 718 superalloy
Yi-tong LONG, Pu-lin NIE, Zhu-guo LI, Jian HUANG, Xiang LI, Xin-mei XU
14
Effect of gap size on microstructure of transient liquid phase bonded IN-738LC superalloy
Vahid MALEKI, Hamid OMIDVAR, Mohammad-reza RAHIMIPOUR

Functional Materials

15
Effect of annealing temperature on martensitic transformation of Ti49.2Ni50.8 alloy processed by equal channel angular pressing
Dian-tao ZHANG, Bao GUO, Yun-xiang TONG, Bing TIAN, Li LI, Yu-feng ZHENG, Dmitry-V GUNDEROV, Ruslan-Z VALIEV
16
Effect of intermetallic compound thickness on anisotropy of Al/Cu honeycomb rods fabricated by hydrostatic extrusion process
Tae-hyuk LEE, Moon-soo SIM, Sin-hyeong JOO, Kyoung-tae PARK, Ha-guk JEONG, Jong-hyeon LEE
17
Preparation of Zr-doped CaTiO3 with enhanced charge separation efficiency and photocatalytic activity
Xiao-jun HUANG, Xin YAN, Hai-yan WU, Ying FANG, Ya-hong MIN, Wen-sheng LI, Shuang-yin WANG, Zhen-jun WU
18
Corrosion resistance of cerium-doped zinc calcium phosphate chemical conversion coatings on AZ31 magnesium alloy
Rong-chang ZENG, Yan HU, Fen ZHANG, Yuan-ding HUANG, Zhen-lin WANG, Shuo-qi LI, En-hou HAN
19
Effect of Co content on electrodeposition mechanism and mechanical properties of electrodeposited Ni-Co alloy
M. ZAMANI, A. AMADEH, S. M. LARI BAGHAL
20
Influence of adipic acid on anodic film formation and corrosion resistance of 2024 aluminum alloy
Ying-dong LI, You ZHANG, Song-mei LI, Pi-zhi ZHAO

Computational Materials Science and Numerical Modelling

21
Theoretical analysis of minimum metal foil thickness achievable by asymmetric rolling with fixed identical roll diameters
Xin LIU, Xiang-hua LIU, Meng SONG, Xiang-kun SUN, Li-zhong LIU
22
Deformation behavior and constitutive model for dual-phase Mg-Li alloy at elevated temperatures
Guo-bing WEI, Xiao-dong PENG, Fa-ping HU, Amir HADADZADEH, Yan YANG, Wei-dong XIE, Mary A. WELLS
23
First-principle calculations of interaction of O2 with pyrite, marcasite and pyrrhotite surfaces
Cui-hua ZHAO, Jian-huaCHEN, Yu-qiong LI, Ye CHEN, Wei-zhou LI
24
Radial mixing and segregation of granular bed bi-dispersed both in particle size and density within horizontal rotating drum
Hui CHEN, Xian-qiong ZHAO, You-gang XIAO, Yi-lun LIU, Ying LIU

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

25
Influence of different phosphates on adsorption and leaching of Cu and Zn in red soil
Zhong-wu LI, Bin HUANG, Jin-quan HUANG, Gui-qiu CHEN, Wei-ping XIONG, Xiao-dong NIE, Wen-ming MA, Guang-ming ZENG
26
Enrichment of ferric iron on mineral surface during bioleaching of chalcopyrite
Tang-jian PENG, Dan ZHOU, Xue-duan LIU, Run-lan YU, Tao JIANG, Guo-hua GU, Miao CHEN, Guan-zhou QIU, Wei-min ZENG
27
Electrochemical behavior of galena and jamesonite flotation in high alkaline pulp
Wei SUN, Chen SUN, Run-qing LIU, Xue-feng CAO, Hong-biao TAO
28
Catalytic performance of biological method seeds on jarosite process
Hai-jun LI, Hong-ying YANG, Guo-bao CHEN
29
Oxidative leaching behavior of metalliferous black shale in acidic solution using persulfate as oxidant
Zhi-xiong LIU, Yan-hong XIANG, Zhou-lan YIN, Xian-wen WU, Jian-bo JIANG, Yi-guang CHEN, Li-zhi XIONG
30
Leaching behavior of metals from high-arsenic dust by NaOH-Na2S alkaline leaching
Xue-yi GUO, Yu YI, Jing SHI, Qing-hua TIAN
31
Corrosion and leaching behaviors of Sn-based alloy in simulated soil solutions
Xiao-dong LAO, Cong-qian CHENG, Xiao-hua MIN, Jie ZHAO, Da-yu ZHOU, Li-hua WANG, Xiao-gang LI
32
Electrochemical behavior of mesh and plate oxide coated anodes during zinc electrowinning
Wei ZHANG, Michael ROBICHAUD, Edward GHALI, Georges HOULACHI
33
Hydrogen absorption characteristics and microstructural evolution of TC21 titanium alloy
Bao-guo YUAN, Yu-bin ZHENG, Yu-jie WANG, Long-qing GONG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)