ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 25    No. 8    August 2015

Structural Materials

1
Effects of cold rolling and heat treatment on microstructure and mechanical properties of AA 5052 aluminum alloy
Bo WANG, Xian-hua CHEN, Fu-sheng PAN, Jian-jun MAO,Yong FANG
2
Comparison of microstructure and wear resistance of A356-SiCp composites processed via compocasting and vibrating cooling slope
H. KHOSRAVI, F. AKHLAGHI
3
Optimizing consolidation behavior of Al 7068-TiC nanocomposites using Taguchi statistical analysis
Amin AZIMI, Ali SHOKUHFAR, Omid NEJADSEYFI, Hamid FALLAHDOOST, Saeid SALEHI
4
Corrosion and electrochemical behaviors of 7A09 Al-Zn-Mg-Cu alloy in chloride aqueous solution
Kun ZHOU, Bin WANG, Yu ZHAO, Jie LIU
5
Porosity sensitivity of A356 Al alloy during fiber laser welding
Kai LI, Feng-gui LU, Song-tao GUO, Hai-chao CUI, Xin-hua TANG
6
Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy
Yu CHEN, Hua DING, Ji-zhong LI, Jing-wei ZHAO, Ming-jie FU, Xiao-hua LI
7
Microstructures and mechanical properties of metal inert-gas arc welded Mg-steel dissimilar joints
Xiao-yong WANG, Da-qian SUN, Shi-qiang YIN, Dong-yang LIU
8
Wear behavior and mechanism of B4C reinforced Mg-matrix composites fabricated by metal-assisted pressureless infiltration technique
Yan-tao YAO, Lan JIANG, Gao-feng FU, Li-qing CHEN
9
Microstructural stability of long term aging treated Ti-22Al-26Nb-1Zr orthorhombic titanium aluminide
Tie-bang ZHANG, Gang HUANG, Rui HU, Jin-shan LI
10
Corrosion behavior of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications in Ringer’s solution
Yan-fei XU, Yi-feng XIAO, Dan-qing YI, Hui-qun LIU, Liang WU, Jing WEN
11
Thermal activation parameters of V-5Cr-5Ti alloy under hot compression
Yu-fei LI, Zhen-hong WANG, Yun-hong ZHOU, Chao LUO, Xin-chun LAI
12
Segmentation of copper alloys processed by equal-channel angular pressing
Omid NEJADSEYFI, Ali SHOKUHFAR, Vahid MOODI

Functional Materials

13
Microstructure and superhardness effect of VC/TiC superlattice films
Xue-chao DONG, Jian-ling YUE, En-qing WANG, Miao-lei LI, Ge-yang LI
14
Effect of Al-deposition on erosion resistance of plasma sprayed thermal barrier coating
Xiao-feng ZHANG, Ke-song ZHOU, Shu-juan DONG, Wei XU, Jin-bing SONG, Min LIU
15
Corrosion properties of stainless steel 316L/Ni-Cu-P coatings in warm acidic solution
Xin-xian FANG, Heng-zhi ZHOU, Ya-jun XUE
16
Hydrophilic and photocatalytic activities of Nd-doped titanium dioxide thin films
Jun DU, Xin GU, Qi WU, Jiao LIU, Hai-zhi GUO, Jian-guo ZOU
17
Influence of processing parameters on laser metal deposited copper and titanium alloy composites
Mutiu F. ERINOSHO, Esther T. AKINLABI, Sisa PITYANA
18
Transition of plasticity and fracture mode of Zr-Al-Ni-Cu bulk metallic glasses with network structures
An-hui CAI, Da-wei DING, Wei-ke AN, Guo-jun ZHOU, Yun LUO, Jiang-hong LI, Yong-yi PENG
19
Effect of melt infiltration parameters on microstructure and mechanical properties of tungsten wire reinforced (Cu50Zr43Al7)99.5Si0.5 metallic glass matrix composite
Ebrahim Karimi SAEIDABADI, Reza GHOLAMIPOUR, Behrouz GHASEMI
20
Thermodynamics and characterization of shape memory Cu-Al-Zn alloys
Lidija GOMID?ELOVI?, Emina PO?EGA, Ana KOSTOV, Nikola VUKOVI?, Vesna KRSTI?, Dragana ?IVKOVI?, Ljubi?a BALANOVI?
21
Dielectric properties and relaxation dynamics in PbF2-TeO2-B2O3-Eu2O3 glasses
Akshatha WAGH, Y. RAVIPRAKASH, Sudha D. KAMATH
22
Preparation of Cr2O3-based pigments with high NIR reflectance via thermal decomposition of CrOOH
Shu-ting LIANG, Hong-ling ZHANG , Min-ting LUO, Hong-xia LIU, Yu-lan BAI, Hong-bin XU, Yi ZHANG
23
Preparation of fibrous nickel powder by precipitation transformation coupled with thermal decomposition
Jian-hui WU, Gang LIU, Tao SU, Wen-hong ZHANG, Mei-mei LUO, Tao WEI
24
Fe3+/Fe2+ redox electrolyte for high-performance polyaniline/SnO2 supercapacitors
Tian-tian LIU, Yin-hai ZHU, En-hui LIU, Zhen-yu LUO, Tian-tian HU, Zeng-peng LI, Rui DING

Computational Materials Science and Numerical Modelling

25
Atomic simulation for influence of helium atom on movement of edge dislocation in nickel
Xi-yuan YANG
26
Horizontal continuous casting process under electromagnetic field for preparing AA3003/AA4045 clad composite hollow billets
Li WU, Hui-jun KANG, Zong-ning CHEN, Ning LIU, Tong-min WANG
27
Electroplastic effect in AZ31B magnesium alloy sheet through uniaxial tensile tests
Huan-yang XIE, Qian WANG, Fang PENG, Kai LIU, Xiang-huai DONG, Jian-feng WANG
28
Nominal friction coefficient in spread formulas based on lead rolling experiments
Hong-yu WANG, Yu-kun HU, Feng GAO, De-wen ZHAO, Dian-hua ZHANG
29
Prediction of vulnerable zones based on residual stress and microstructure in CMT welded aluminum alloy joint
Feng-yuan SHU, Ze TIAN, Yao-hui Lü, Wen-xiong HE, Fei-yang Lü, Jian-jun LIN, Hong-yun ZHAO, Bin-shi XU

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

30
Mechanical behavior of red sandstone under cyclic point loading
Zi-long ZHOU, Zhi-bo WU, Xi-bing LI, Xiang LI, Chun-de MA
31
Function of microorganism and reaction pathway for carrollite dissolution during bioleaching
Hong-ying YANG, Wei LIU, Guo-bao CHEN, Yuan-yuan LIU, Lin-lin TONG, Zhe-nan JIN, Zi-long LIU
32
Surface species of chalcopyrite during bioleaching by moderately thermophilic bacteria
Hong-bo ZHAO, Jun WANG, Wen-qing QIN, Xi-hua ZHENG, Lang TAO, Xiao-wen GAN, Guan-zhou QIU
33
Crystallization of gibbsite from synthetic chromate leaching solution in sub-molten salt process
Pei-yu ZHANG, Guang-ye WEI, Qiang GUO, Jing-kui QU, Tao QI
34
Selective reduction process of zinc ferrite and its application in treatment of zinc leaching residues
Gang YU, Ning PENG, Lan ZHOU, Yan-jie LIANG, Xiao-yuan ZHOU, Bing PENG, Li-yuan CHAI, Zhi-hui YANG
35
Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodology
Mehmet KUL, Kür?ad O?uz OSKAY, Mehmet ??M??R, Halit SüBüTAY, Habip KIRGEZEN
36
Comparative studies on hydrometallurgical treatment of smelted low-grade electronic scraps for selective copper recovery
Ewa RUDNIK, Karolina KO?CZYK, Dawid KUTY?A
37
Vapor pressure measurement of lead and lead chlorides in FeOT-CaO-SiO2-Al2O3 system
Yan-ling ZHANG, Eiki KASAI
38
Oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process
Yu-tong ZHOU, Yan-xiang LI
39
Rheological property and drying mechanism of thermoresponsive gelcasting of ZnO
Xiao-feng WANG, Ri-chu WANG, Chao-qun PENG, Wen-yan SUN, Yue-hua SUN
40
New interpretation of experimental data on Si-As alloy solidification with planar interface
S. L. SOBOLEV
41
Role of Ni content in improvement of corrosion resistance of Zn-Ni alloy in 3.5% NaCl solution. Part I: Polarization and impedance studies
Hany M. ABD EL-LATEEF, Abdel-Rahman EL-SAYED, Hossnia S. MOHRAN
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)