ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 25    No. 6    June 2015

Structural Materials

3
Interface, lattice strain and dislocation density of SiCp/Al composite consolidated by equal channel angular pressing and torsion
Chen-hao QIAN, Ping LI, Ke-min XUE
4
Influence of thermomechanical processing on microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloy sheets
Xiao-feng WANG, Ming-xing GUO, Ling-yong CAO, Jin-ru LUO, Ji-shan ZHANG, Lin-zhong ZHUANG
5
Microstructure and properties of Al-0.70Fe-0.24Cu alloy conductor prepared by horizontal continuous casting and subsequent continuous extrusion forming
Xiao-yuan ZHANG, Hui ZHANG, Xiang-xin KONG, Ding-fa FU
6
Microstructure and mechanical properties of friction stir welded AA7075-T651 aluminum alloy thick plates
T. SRINIVASA RAO, G. MADHUSUDHAN REDDY, S. R. KOTESWARA RAO
7
Microstructure and mechanical properties of dissimilar Al-Cu joints by friction stir welding
Qiu-zheng ZHANG, Wen-biao GONG, Wei LIU
8
Formability analysis of dissimilar tailor welded blanks welded with different tool pin profiles
Bhanodaya Kiran Babu NADIKUDI, M. J. DAVIDSON, Neelakanteswara Rao AKASAPU, M. GOVINDARAJU
9
Fracture behavior of double-pass TIG welded 2219-T8 aluminum alloy joints under transverse tensile test
Quan LI, Ai-ping WU, Yue ZHAO, Guo-qing WANG, Dong-yang YAN, Hui-qiang WU
10
Grain refining effect of Mg by novel particle cluster-containing Al-Ti-C master alloy
Xiao-teng LIU, Hai HAO, Xiao-xu ZHU, Xing-guo ZHANG
11
Effect of complex melt-refining treatment on microstructure and mechanical properties of sand-cast Mg–10Gd–3Y–0.5Zr alloy
Jun MEI, Wen-cai LIU, Guo-hua WU, Yang ZHANG, Yi-tao ZHANG, Yi-kai HONG, Ruo-xi ZHANG, Lü XIAO, Wen-jiang DING
12
Hot deformation behavior and workability of pre-extruded ZK60A magnesium alloy
Shi-yi WANG, Lei GAO, Alan A. LUO, De-jiang LI, Xiao-qin ZENG
13
Dynamic recrystallization mechanisms during hot compression of Mg-Gd-Y-Nd-Zr alloy
Yi-pingWU, Xin-ming ZHANG, Yun-laiDENG, Chang-pingTANG, LiuYANG, Ying-ying ZHONG
14
Identification of damage mode in AZ31 magnesium alloy under tension using acoustic emission
Hong CHANG
15
Evaluation of wear and corrosion resistance of pure Mg wire produced by friction stir extrusion
Mohammad SHARIFZADEH, Mohammad ali ANSARI, Morteza NARVAN, Reza ABDI BEHNAGH, Alireza ARAEE, Mohammad Kazem BESHARATI GIVI
16
Microstructural evolution and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy
Hai-shui REN, Xiang-jun TIAN, Dong LIU, Jian LIU, Hua-ming WANG
17
Effects of solution-aging treatment on microstructures and properties of Ti-55.06%Ni-0.3%Cr alloy
Li-zhou ZENG, Bing-hui LUO, Bin LI, Zhen-hai BAI, Sheng OUYANG, Wen-li FAN
18
Effect of cyclic heat treatment on microstructures and mechanical properties of directionally solidified Ti-46Al-6Nb alloy
Hong-ze FANG, Rui-run CHEN, Getman ANTON, Jing-jie GUO, Hong-sheng DING, Yan-qing SU, Heng-zhi FU
19
Effect of vacuum annealing on microstructure and mechanical properties of TA15 titanium alloy sheets
Hui-jun ZHAO, Bao-yu WANG, Gang LIU, Lei YANG, Wen-chao XIAO
20
Arrhenius-type constitutive model and dynamic recrystallization behavior of V-5Cr-5Ti alloy during hot compression
Yu-fei LI, Zhen-hong WANG, Lin-ying ZHANG, Chao LUO, Xin-chun LAI
21
Surface quality, microstructure and mechanical properties of Cu-Sn alloy plate prepared by two-phase zone continuous casting
Xue-feng LIU, Ji-hui LUO, Xiao-chen WANG

Functional Materials

22
Thermal conductivity of Al-Gd-TM glass-forming alloys
V. BYKOV, S. UPOROV, T. KULIKOVA
23
Corrosion resistance of in-situ Mg-Al hydrotalcite conversion film on AZ31 magnesium alloy by one-step formation
Rong-chang ZENG, Zhen-guo LIU, Fen ZHANG, Shuo-qi LI, Qing-kun HE, Hong-zhi CUI, En-hou HAN
24
Influence of nano-SiC on microstructure and property of MAO coating formed on AZ91D magnesium alloy
Shu-yan WANG, Nai-chao SI, Yong-ping XIA, Li LIU
25
Surface modification of Cu-25Cr alloy induced by high current pulsed electron beam
Zhi-ming ZHOU, Lin-jiang CHAI, Zhi-pei XIAO, Jian TU, Ya-ping WANG, Wei-jiu HUANG
26
Effects of Al and N plasma immersion ion implantation on surface microhardness, oxidation resistance and antibacterial characteristics of Cu
Quan-zhang AN, Kai FENG, He-ping Lü, Xun CAI, Tie-tun SUN, Paul K. CHU
27
Friction coefficient and microhardness of anodized aluminum alloys under different elaboration conditions
M. GUEZMIL, W. BENSALAH, A. KHALLADI, K. ELLEUCH, M. DEPETRIS-WERY, H.F. AYEDI
28
Development of black Ni-Co alloy films from modified Watts electrolyte and its morphology and structural characteristics
R. SEKAR, K. K. JAGADESH, G. N. K. RAMESH BAPU
29
Effects of stoichiometric ratio La/Mg on structures and electrochemical performances of as-cast and annealed La-Mg-Ni-based A2B7-type electrode alloys
Yang-huan ZHANG, Tai YANG, Ting-ting ZHAI, Ze-ming YUAN, Guo-fang ZHANG, Shi-hai GUO
30
Synthesis and electrochemical performance of Li3-2xMgxV2(PO4)3/C composite cathode materials for lithium-ion batteries
Wu-mei YIN, Ting-ting ZHANG, Qing ZHU, Quan-qi CHEN, Gu-cai LI, Ling-zhi ZHANG
31
Effect of WS2 addition on electrical sliding wear behaviors of Cu-graphite-WS2 composites
Gang QIAN, Yi FENG, Yang-ming CHEN, Fei MO, Yu-qing WANG, Wen-hong LIU
32
Effects of rolling and annealing on microstructures and properties of Cu/Invar electronic packaging composites prepared by powder metallurgy
Dan WU, Lei YANG, Chang-dong SHI, Yu-cheng WU, Wen-ming TANG
33
Uniaxial tensile behavior of porous metal fiber sintered sheet
Bo ZHOU, Wei YUAN, Jin-yi HU, Yong TANG, Long-sheng LU, Bin-hai YU
34
Growth behavior of CVD diamond in microchannels of Cu template
Xue-zhang LIU, Xiong-wei ZHANG, Zhi-ming YU
35
Effect of gelcasting conditions on quality of porous Al-Cu alloy
Hai-ying YUAN, Cheng-chang JIA, Cong-cong WANG, Yu-hong CHANG, Xin-xin ZHANG, Bekouche KARIMA, Zhao-li WANG

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

36
Kinetic studies of gold recovery from dilute aqueous solutions using Fe2+ chloride ions
Marek WOJNICKI, Krzysztof FITZNER, Magdalena LUTY-B?OCHO
37
Passive behavior of gold in sulfuric acid medium
Wei ZHANG, Ahmet Deniz BAS, Edward GHALI, Yeonuk CHOI
38
Electrodeposition of cobalt from aqueous sulphate solutions in the presence of tetra ethyl ammonium bromide
Pinak PATNAIK, Subrat Kumar PADHY, Bankim Chandra TRIPATHY, Indra Narayan BHATTACHARYA, Raja Kishore PARAMGURU
39
Effect of EDTA and NH4Cl additives on electrodeposition of Zn-Ni films from choline chloride-based ionic liquid
S. FASHU, Chang-dong GU, Jia-lei ZHANG, Mei-ling HUANG, Xiu-li WANG, Jiang-ping TU
40
Reaction behaviour of Al2O3 and SiO2 in high alumina coal fly ash during alkali hydrothermal process
Zhou-qing JIANG, Jing YANG, Hong-wen MA, Le WANG, Xi MA
41
Preparation of high purity cadmium with micro-spherical architecture from zinc flue dust
Yuan LIU, Ya-jie ZHENG, Zhao-ming SUN
42
Hydrothermal synthesis of silver nanoparticles in Arabic gum aqueous solutions
Ying-fen LI, Wei-ping GAN, Jian ZHOU, Zhi-qiang LU, Chao YANG, Tian-tian GE
43
Effect of basicity on sintering behavior of low-titanium vanadium-titanium magnetite
Song-tao YANG, Mi ZHOU, Tao JIANG, Yan-jun WANG, Xiang-xin XUE
44
Electrosynthesis of Al/Pb/α-PbO2 composite inert anode materials
Gang HU, Rui-dong XU, Shi-wei HE, Bu-ming CHEN, Hai-tao YANG, Bo-hao YU, Qiang LIU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)