ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 25    No. 1    January 2015

Structural Materials

1
Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys
F. BERGE, L. KRüGER, H. OUAZIZ, C. ULLRICH
2
Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling
Fei GUO, Ding-fei ZHANG, Xu-sheng YANG, Lu-yao JIANG, Fu-shengPAN
3
Microstructures and mechanical properties of Mg-Al-Sm series heat-resistant magnesium alloys
Zheng-hua HUANG, Wen-jun QI, Jing XU, Chang CAI
4
Microstructure and properties of plasma remelted AZ91D magnesium alloy
Hong-zhi CUI, Zhao-tao MENG, Cheng-zhu XIAO, Jin-quan SUN, Cui-xiang WANG
5
Microstructural development and its effects on mechanical properties of Al/Cu laminated composite
Xiao-bing LI, Guo-yin ZU, Ping WANG
6
Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route
A. FATHY, Omyma EL-KADY, Moustafa M. M. MOHAMMED
7
Distribution and engulfment behavior of TiB2 particles or clusters in wedge-shaped copper casting ingot
Jing SUN, Xiao-bo ZHANG, Qing CAI, Yi-jie ZHANG, Nai-heng MA, Hao-wei WANG
8
Influence of plate length and plate cooling rate on solidification and microstructure of A356 alloy produced by oblique plate
N. K. KUND
9
Microstructure and mechanical properties of TC21 titanium alloy by near-isothermal forging
Zhi-feng SHI, Hong-zhen GUO, Rui LIU, Xiao-chen WANG, Ze-kun YAO
10
Bonding interface characteristic and shear strength of diffusion bonded Ti-17 titanium alloy
Hong LI, Chao ZHANG, Hong-bin LIU, Miao-quan LI
11
Hot deformation and processing map of GH3535 superalloy
Ya-qi JI, Shun-de QU, Wei-xin HAN
12
Influence of tool rotational speed on microstructure and sliding wear behavior of Cu/B4C surface composite synthesized by friction stir processing
R. SATHISKUMAR, I. DINAHARAN, N. MURUGAN, S. J. VIJAY
13
Microstructure, mechanical properties and wear behaviour of Zn-Al-Cu-TiB2 in situ composites
Fei CHEN, Tong-min WANG, Zong-ning CHEN, Feng MAO, Qiang HAN, Zhi-qiang CAO

Functional Materials

14
Research progress of Ag3PO4-based photocatalyst: Fundamentals and performance enhancement
Yun-zhu MA, Fan CHENG, Wen-sheng LIU, Juan WANG, Yi-kai WANG
15
Magnetostriction and microstructure of melt-spun Fe77Ga23 ribbons prepared with different wheel velocities
Hao LIU, Hai-ou WANG, Meng-xiong CAO, Wei-shi TAN, Yang-guang SHI, Feng XU, Quan-jie JIA , Yu-ying HUANG
16
Solution combustion synthesis of Ni-Y2O3 nanocomposite powder
Ye LIU, Ming-li QIN, Lin ZHANG, Bao-rui JIA, Zhi-qin CAO, De-zhi ZHANG, Xuan-hui QU
17
Effects of Fe2O3 content on microstructure and mechanical properties of CaO-Al2O3-SiO2 system
Xiang-zhong REN, Wei ZHANG, Yong ZHANG, Pei-xin ZHANG, Jian-hong LIU
18
Fabrication and characterization of electrodeposited nanocrystalline Ni-Fe alloys for NiFe2O4 spinel coatings
Li MA, Long ZHANG, Xiao-bing LI, Zhi-you LI, Ke-chao ZHOU
19
Thermal conductivity of carbon nanotube-silver composite
Hemant PAL, Vimal SHARMA
20
Compressive behavior of Zn-22Al closed-cell foams under uniaxial quasi-static loading
A. Heydari ASTARAIE, H. R. SHAHVERDI, S. H. ELAHI
21
Microstructure and thermophysical properties of SiC/Al composites mixed with diamond
Hong GUO, Yuan-yuan HAN, Xi-min ZHANG, Cheng-chang JIA, Jun XU
22
Effect of TiO2 content on properties of Al2O3 thermal barrier coatings by plasma spraying
Sheng-kai JIA, Yong ZOU, Ji-yuan XU, Jing WANG, Lei YU
23
High temperature oxidation resistance and microstructure change of aluminized coating on copper substrate
Hong-xing WANG, Yan ZHANG, Jia-lin CHENG, Yu-shan LI
24
Oxidation and hot corrosion of electrodeposited Ni-7Cr-4Al nanocomposite
Hai-jun ZHANG, Jian-feng SUN
25
Properties of Zn-Bi composite coatings prepared by ionic co-discharge deposition
See Leng TAY, Wei-wei CHEN, Xiao-jin WEI, Cai-zhen YAO, Wei GAO
26
Effect of linear carboxylic ester on low temperature performance of LiMn2O4-graphite cells
Shu HONG, Jie LI, Guan-chao WANG, Zhi-an ZHANG, Yan-qing LAI

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

32
Geochemistry of intrusive rock in Dachang tin-polymetallic ore field, Guangxi, China: Implications for petrogenesis and geodynamics
Yong-sheng CHENG
33
Three-dimensional analytical solution of acoustic emission source location for cuboid monitoring network without pre-measured wave velocity
Long-jun DONG, Xi-bing LI, Zi-long ZHOU, Guang-hui CHEN, Ju MA
34
Comparison of electrochemical dissolution of chalcopyrite and bornite in acid culture medium
Hong-bo ZHAO, Ming-hao HU, Yi-ni LI, Shan ZHU, Wen-qing QIN, Guan-zhou QIU, Jun WANG
35
Flotation of carbonaceous copper shale-quartz mixture with poly(ethylene glycol) alkyl ethers
Przemyslaw B. KOWALCZUK, Emilia ZALESKA, Oliver DANCZAK
36
Mechanism analysis of ions interaction in MgCl2/LiCl solution and effect of lithium on ammonia precipitation products
Jin TAN, Zheng-ping WU, Yuan-bing SUN, Jin-ling ZHANG, Zhou-lan YIN, Qi-yuan CHEN
37
Solvent extraction of rubidium and cesium from salt lake brine with t-BAMBP-kerosene solution
Shi-ming LIU, He-hui LIU, Yun-jing HUANG, Wei-jun YANG
38
Effect of gas bubble on cell voltage oscillations based on equivalent circuit simulation in aluminum electrolysis cell
Yong-liang WANG, Jun TIE, Gan-feng TU, Shu-chen SUN, Ren-tao ZHAO, Zhi-fang ZHANG
39
Electrochemical characterization of Ti12Mo5Ta alloys in contact with saline medium
Daniel MARECI, Romeu CHELARIU, Adrian CAILEAN, Florin BRINZA, Georgiana BOLAT, Doina Margareta GORDIN
40
Oxidation behavior of Hastelloy C-2000 superalloy at 800 °C and 1000 °C
Liang YUAN, Rui HU, Tie-bang ZHANG, Jin-shan LI, Xiao-qing ZHANG
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)