ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 24    No. 4    April 2014

Structural Materials

1
Effects of Y on hot tearing susceptibility of Mg-Zn-Y-Zr alloys
Zheng LIU, Si-bo ZHANG, Ping-li MAO, Feng WANG
2
Elimination of yielding asymmetry in extruded AZ80 alloy by ageing
Ran LIU, De-liang YIN, Jing-tao WANG
3
Effect of pouring and mold temperatures on hot tearing susceptibility of AZ91D and Mg-3Nd-0.2Zn-Zr Mg alloys
Hao HUANG, Peng-huai FU, Ying-xin WANG, Li-ming PENG, Hai-yan JIANG
4
Flow behavior and microstructure of ZK60 magnesium alloy compressed at high strain rate
Yuan-zhi WU, Hong-ge YAN, Su-qin ZHU, Ji-hua CHEN, An-min LIU, Xian-lan LIU
5
Microstructural evolution of Al-0.66Mg-0.85Si alloy during homogenization
Li-zhen YAN, Yong-an ZHANG, Xi-wu LI, Zhi-hui LI, Feng WANG, Hong-wei LIU, Bai-qing XIONG
6
Effects of grain refining and modification on mechanical properties and microstructures of Al-7.5Si-4Cu cast alloy
Guang-lei LIU, Nai-chao SI, Shao-chun SUN, Qin-fang WU
7
Preparation of semi-solid 7075 aluminum alloy slurry by serpentine pouring channel
Wen-zhi ZHU, Wei-min MAO, Qin TU
8
Modeling and optimization of cooling slope process parameters for semi-solid casting of A356 Al alloy
Hamed KHOSRAVI, Reza ESLAMI-FARSANI, Mohsen ASKARI-PAYKANI
9
Effect of laser shock processing on fatigue life of fastener hole
Xing-quan ZHANG, Liu-san CHEN, Xiao-liu YU, Li-sheng ZUO, Yu ZHOU
10
Evolution of microstructure and hardness of aluminum after friction stir processing
Wen-ying GAN, Zheng ZHOU, Hang ZHANG, Tao PENG
11
Effect of Si content on microstructure and properties of Si/Al composites
Wei-chen ZHAI, Zhao-hui ZHANG, Fu-chi WANG, Xiang-bo SHEN, Shu-kui LEE, Lu WANG
12
Microstructures and properties of welded joint of aluminum alloy to galvanized steel by Nd:YAG laser + MIG arc hybrid brazing-fusion welding
Guo-liang QIN, Yu-hu SU, Shu-jun WANG
13
TLP bonding of dissimilar FSX-414/IN738 system with MBF80 interlayer: Prediction of solid/liquid interface location
B. ABBASI KHAZAEI, G. ASGHARI, R. BAKHTIARI
14
Influence of rotational speed on mechanical properties of friction stir lap welded 6061-T6 Al alloy
Firouz FADAEIFARD, Khamirul Amin MATORI, Meysam TOOZANDEHJANI, Abdul Razak DAUD, Mohd Khairol Anuar Mohd ARIFFIN, Norinsan Kamil OTHMAN, Farhad GHARAVI, Abdul Hadi RAMZANI, Farhad OSTOVAN
15
Effect of electropulsing on deformation behavior of Ti-6Al-4V alloy during cold drawing
Yan ZHOU, Guo-qing CHEN, Xue-song FU, Wen-long ZHOU
16
Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater
Jun CHEN, Qing ZHANG, Quan-an LI, San-ling FU, Jian-zhang WANG

Functional Materials

17
Laser-weldable Sip-SiCp/Al hybrid composites with bilayer structure for electronic packaging
Meng-jian ZHU, Shun LI, Xun ZHAO, De-gan XIONG
18
Microstructure and properties of SiCp/Al electronic packaging shell produced by liquid-solid separation
Ming-hai GUO, Jun-you LIU, Yan-xia LI
19
Effects of rolling and annealing on microstructures and properties of Cu-Mg-Te-Y alloy
Liang CHEN, Jian-ning HAN, Bing-wen ZHOU, Yan-yan XUE, Fei JIA, Xing-guo ZHANG
20
Effect of Co substitution on magnetic properties of Ni-Mn-Sn magnetic shape memory alloys
Jia-mu CAO, Chang-long TAN, Xiao-hua TIAN, Qin-ci LI, Er-jun GUO, Li-ping WANG, Yi-jiang CAO
21
Surface modification of biomedical magnesium alloy wires by micro-arc oxidation
Cheng-lin CHU, Xiao HAN, Jing BAI, Feng XUE, Paul-kao CHU
22
Surface modification of titanium plate enhanced fibronectin-mediated adhesion and proliferation of MG-63 cells
Zheng ZHOU, Yao DAI, Bin-bin LIU, Lei-lei XIA, Hong-bo LIU, Pankaj VADGAMA, Hai-rong LIU
23
Preparation and improved photocatalytic activity of ordered mesoporous TiO2 by evaporation induced self-assembly technique using liquid crystal as template
Chen LIU, You-ji LI, Peng XU, Ze-shi LI, Meng-xiong ZENG
24
Synthesis of one-dimensional carbon nanostructures and their application as anode materials in lithium ion batteries
Jing-jing TANG, Juan YANG, Xiang-yang ZHOU, Guang-hui CHEN, Bin HUANG

Computational Materials Science and Numerical Modelling

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

30
A dynamic analysis of environmental losses from anthropogenic lead flow and their accumulation in China
Jing LIANG, Jian-su MAO
31
Analysis of anthropogenic aluminum cycle in China
Qiang YUE, He-ming WANG, Zhong-wu LU, Sheng-ke ZHI
32
Flotation recovery of vanadium from low-grade stone coal
Li WANG, Wei SUN, Run-qing LIU, Xiao-chuan GU
33
Formation of jarosite and its effect on important ions for Acidithiobacillus ferrooxidans bacteria
B. NAZARI, E. JORJANI, H. HANI, Z. MANAFI, A. RIAHI
34
Optimization of copper extraction for bioleaching of complex Cu-polymetallic concentrate by moderate thermophiles
Yu-guang WANG, Li-jun SU, Wei-min ZENG, Guan-zhou QIU, Li-li WAN, Xin-hua CHEN, Hong-bo ZHOU
35
Effect of pyrite, elemental sulfur and ferrous ions on EPS production by metal sulfide bioleaching microbes
Zhi-guo HE, Yan-pingYANG, Shan ZHOU, Yue-hua HU, Hui ZHONG
36
Selective recovery of lead from zinc oxide dust with alkaline Na2EDTA solution
Qing LIU, Sheng-hai YANG, Yong-ming CHEN, Jing HE, Hao-tian XUE
37
Recovery of alumina from circulating fluidized bed combustion Al-rich fly ash using mild hydrochemical process
Quan-cheng YANG, Shu-hua MA, Shi-li ZHENG, Ran ZHANG
38
Removal of manganese from waste water by complexation-ultrafiltration using copolymer of maleic acid and acrylic acid
Yun-ren QIU, Lian-jun MAO, Wei-hua WANG
39
Effect of copper, sulfur, arsenic and antimony on silver distribution in phases of lead blast furnace
J. CHAIDEZ-FELIX, A. ROMERO-SERRANO, A. HERNANDEZ-RAMIREZ, M. PEREZ-LABRA, I. ALMAGUER-GUZMAN, R. BENAVIDES-PEREZ, M. FLORES-FAVELA
40
Products of carbothermic reduction of Fe-Cr-O and Fe-Cr-Ni-O systems
Yan-ling ZHANG, Yang LIU, Wen-jie WEI
41
Penetrative and migratory behavior of alkali metal in different binder based TiB2-C composite cathodes
Zhao FANG, Xiao-lei WU, Juan YU, Lin-bo LI, Jun ZHU
42
Boron removal in purifying metallurgical grade silicon by CaO-SiO2 slag refining
Ji-jun WU, Yan-long LI, Wen-hui MA, Kui-xian WEI, Bin YANG, Yong-nian DAI
43
Recovery of high purity silicon from SoG crystalline silicon cutting slurry waste
Da-gang LI, Peng-fei XING, Yan-xin ZHUANG, Feng LI, Gan-feng TU
44
A model for extracting large deformation mining subsidence using D-InSAR technique and probability integral method
Hong-dong FAN, Wei GU, Yong QIN, Ji-qun XUE, Bing-qianCHEN
45
Numerical simulation of dynamic surface deformation based on DInSAR monitoring
Yue-guan YAN, Hua-yang DAI, Lin-lin GE, Jun-ting GUO, Alex Hay-Man NG, Xiao-jing LI
46
Spatial structure evolution of overlying strata and inducing mechanism of rockburst in coal mine
Lin-ming DOU, Xue-qiu HE, Hu HE, Jiang HE, Jun FAN
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)