ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 24    No. 3    March 2014

Structural Materials

1
Effects of Cu addition on microstructure and mechanical properties of as-cast magnesium alloy ZK60
Hong-mei ZHU, Cheng-ping LUO, Jiang-wen LIU, Dong-ling JIAO
2
Effect of heat treatment on microstructures and mechanical properties of sand-cast Mg-10Gd-3Y-0.5Zr magnesium alloy
Liang CAO, Wen-cai LIU, Zhong-quan LI, Guo-hua WU, Lü XIAO, Shao-hua WANG, Wen-jiang DING
3
Hot compression behavior and processing map of cast Mg-4Al-2Sn-Y-Nd alloy
Jing WANG, Bao-liang SHI, Yuan-sheng YANG
4
Creep mechanism and creep constitutive model of aluminum silicate short-fiber-reinforced magnesium matrix composite
Jun TIAN, Zi-qiong SHI
5
Strengthening contributions in ultra-high strength cryorolled Al-4%Cu-3%TiB2 in situ composite
N. NAGA KRISHNA, K. SIVAPRASAD, P. SUSILA
6
High-cycle fatigue behavior of friction stir butt welded 6061 aluminium alloy
Hrishikesh DAS, Debayan CHAKRABORTY, Tapan KUMAR PAL
7
Effect of welding sequence on residual stress in thin-walled octagonal pipe-plate structure
Ding-fa FU, Chang-qing ZHOU, Can LI, Guan WANG, Luo-xing LI
8
Effect of superheat and solidified layer on achieving good metallic bond between A390/A356 alloys fabricated by cast-decant-cast process
M. MOHAMMADI RAHVARD, M. TAMIZIFAR, M. A. BOUTORABI, S. GHOLAMI SHIRI
9
Anomalous yield and intermediate temperature brittleness behaviors of directionally solidified nickel-based superalloy
Li-yuan SHENG, Fang YANG, Jian-ting GUO, Ting-fei XI
10
Microstructure characterization and mechanical properties of TC4-DT titanium alloy after thermomechanical treatment
Xiao-na PENG, Hong-zhen GUO, Zhi-feng SHI, Chun QIN, Zhang-long ZHAO
11
Effect of wet shot peening on Ti-6Al-4V alloy treated by ceramic beads
Guo-qing CHEN, Yan JIAO, Tang-yong TIAN, Xin-hua ZHANG, Zhi-qiang LI, Wen-long ZHOU
12
Effect of heat treatment on microstructure and mechanical property of Ti-steel explosive-rolling clad plate
Hai-tao JIANG, Xiao-qian YAN, Ji-xiong LIU, Xiao-ge DUAN

Functional Materials

13
Effect of Ce,Co,B on formation of LaCo13-structure phase in La(Fe,Si)13 alloys
Xiang CHEN, Yun-gui CHEN, Yong-bai TANG, Ding-quan XIAO
14
Fe75Zr3Si13B9 magnetic materials prepared by spark plasma sintering
Xing-hua WANG, Ge WANG, Yu-ying ZHU, Jin-feng BAO, Xiong-fei DU, Qiang LI
15
Effects of alcohol additives on pore structure and morphology of freeze-cast ceramics
Jing ZENG, Yan ZHANG, Ke-chao ZHOU, Dou ZHANG
16
Effect of vinylene carbonate as electrolyte additive on cycling performance of LiFePO4/graphite cell at elevated temperature
Hai-shen SONG, Zheng CAO, Zhi-an ZHANG, Yan-qing LAI, Jie LI, Ye-xiang LIU
17
Crystallization kinetics and temperature dependence of energy storage properties of niobate glass-ceramics
Tao-yong LIU, Guo-hua CHEN, Jun SONG, Chang-lai YUAN
18
Effect of annealing treatment on morphologies and gas sensing properties of ZnO nanorods
Jian-jiao ZHANG, Er-jun GUO, Li-ping WANG, Hong-yan YUE, Guo-jian CAO, Liang SONG
19
Photocatalytic degradation and inactivation of Escherichia coli by ZnO/ZnAl2O4 with heteronanostructures
Li ZHANG, Jian-hui YAN, Min-jie ZHOU, Yan-ping YU, Ye LIU, You-nian LIU
20
Size control and its mechanism of SnAg nanoparticles
Wei-peng ZHANG, Chang-dong ZOU, Bing-ge ZHAO, Qi-jie ZHAI, Yu-lai GAO
21
Preparation and characterization of diamond film on Cu substrate using Cu-diamond composite interlayer
Wan-qi QIU, Zhi-gang HU, Zhong-wu LIU, De-chang ZENG, Ke-song ZHOU
22
Effect of electron beam irradiation on multi-walled carbon nanotubes
Bin LI, Yi FENG, Ke-wang DING, Gang QIAN, Xue-bin ZHANG, Yan-fang LIU
23
Effect of normalizing cooling process on microstructure and precipitates in low-temperature silicon steel
Hui LI, Yun-li FENG, Meng SONG, Jing-long LIANG, Da-qiang CANG

Computational Materials Science and Numerical Modelling

24
Isothermal section of Mg-Nd-Gd ternary system at 723 K
Long XIAO, Yan ZHONG, Cui-ping CHEN, Ming-ming WULIU, Tian-kuang LUO, Li-bin LIU, Kui LIN
25
Thermodynamic consistent phase field model for sintering process with multiphase powders
Rui-jie ZHANG, Zhong-wei CHEN, Wei FANG, Xuan-hui QU
26
New numerical algorithm of gas-liquid two-phase flow considering characteristics of liquid metal during mold filling
Xiao-feng NIU, Zhao FANG, Wei LIANG, Hua HOU, Hong-xia WANG
27
High-temperature flow behavior modeling of 2099 alloy considering strain effects
Fei ZHANG, Jian SHEN, Xiao-dong YAN, Jian-lin SUN, Xiao-long SUN, Yin YANG, Yong LIU

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

28
Fracture evolution around pre-existing cylindrical cavities in brittle rocks under uniaxial compression
Xing-dong ZHAO, Hong-xun ZHANG, Wan-cheng ZHU
29
Development of multi-channel observation and inversion for IP electrical sounding method
Hai-fei LIU, Jian-xin LIU, Rong-wen GUO, Xiao-zhong TONG, Lu GONG, Yan-hua PENG
30
Generalized functional model of maximum and minimum detectable deformation gradient for PALSAR interferometry
Qi-jie WANG, Zhi-wei LI, Ya-nan DU, Rong-an XIE, Xin-qing ZHANG, Mi JIANG, Jian-jun ZHU
31
3D characterization and analysis of pore structure of packed ore particle beds based on computed tomography images
Bao-hua YANG, Ai-xiang WU, Xiu-xiu MIAO, Jin-zhi LIU
32
Kinetics of extracting magnesium from mixture of calcined magnesite and calcined dolomite by vacuum aluminothermic reduction
Da-xue FU, Nai-xiang FENG, Yao-wu WANG, Jian-ping PENG, Yue-zhong DI
33
Reaction kinetics of roasting high-titanium slag with concentrated sulfuric acid
Li-li SUI, Yu-chun ZHAI
34
Preparation of Na specific absorbent and application of sodium removal from ammonium tungstate solution
Zhong-wei ZHAO, Mao-feng YANG, Li-hua HE, Jia-liang ZHANG, Xing-yu CHEN, Xu-heng LIU
35
Reductive leaching of manganese oxide ores using waste tea as reductant in sulfuric acid solution
Qing TANG, Hong ZHONG, Shuai WANG, Jin-zhong LI, Guang-yi LIU
36
Kinetics and equilibrium adsorption of copper(II) and nickel(II) ions from aqueous solution using sawdust xanthate modified with ethanediamine
Lu XIA, Yi-xu HU, Bo-han ZHANG
37
Electrochemical reduction process of Co(II) in citrate solution
Yan LIU, Zhe-jun LI, Yi-cheng WANG, Wei WANG
38
Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte
Neboj?a D. NIKOLI?, Djendji Dj. VA?TAG, Vesna M. MAKSIMOVI?, Goran BRANKOVI?
39
Anodic behavior and microstructure of Al/Pb-Ag anode during zinc electrowinning
Yong-chun ZHANG, Bu-ming CHEN, Hai-tao YANG, Zhong-cheng GUO, Rui-dong XU
40
Solid-phase sintering process and forced convective heat transfer performance of porous-structured micro-channels
Peng-fei BAI, Zi-chuan YI, Biao TANG, Guo-fu ZHOU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)