ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 15    Sepecial 3    November 2005
1
Effect of Ce-rich mish metals and electromagnetic stirring on microstructure of AZ91D magnesium alloy
杨宝亮,陈可,汪涛,胡孝昀,周衡志,李子全
2
Effect of residual-stress on microyield behavior of Al alloy reinforced by SiCp
李多生,左敦稳,陈同彩,张建云,周贤良,华小珍
3
Aging behaviors of Al-Cu-Li-Zr alloy containing Sc
梁文杰,潘青林,朱朝明,何运斌,刘元斐
4
Influence of quench on ageing response and mechanical properties of Al-Zn-Mg-Cu-Zr alloy
樊喜刚,蒋大鸣,孟庆昌
5
Effect of extrusion ratio on mechanical properties of AZ31B alloy
王海波,洪艳,梁宇询
6
Effect of heat treatment on high-cycle fatigue behavior of Mg-Zn-Y-Zr alloy
刘志浩,徐永波,刘路,韩恩厚,高国忠
7
Microstructures and tensile properties of AZ31 magnesium alloy thin sheet
戴瑜,刘希琴,刘子利,陈照峰,孙国佩
8
Deformation behavior and microstructure of NiAl-Cr(Mo) alloy by powder metallurgical technique
高强,刘午,郭建亭,淮凯文,张俊善
9
Synthesis and characterization of Fe3Al intermetallic nanopowder by hydrogen arc plasma method (HP)
尹衍生,董丽华,范春华
10
Optimized design and preparation of Ti/TiAl laminated composite
马李,赫晓东,李垚
11
Preparation and mechanical properties of NiCoCrAlY/NiCr laminates by electron beam physical vapor deposition
韩杰才,李垚,赫晓东,孟松鹤,曾岗,陈宏平
12
High-cycle fatigue behavior of nickel-base single crystal superalloy
刘源,于金江,徐岩,胡壮麒,孙晓峰,管恒荣
13
Mechanical properties and oxidation formation of EB-PVD deposited Ni-Cr-Al alloy
关春龙,栗政新,赫晓东
14
Evaluation of new Ni-based superalloy prepared by EB-PVD
李晓海,韩杰才,孟松鹤,陈贵清
15
Thermal fatigue crack initiation in K465 superalloy
杨金侠,胡壮麒,郑启,孙晓峰,管恒荣
16
High temperature creep-rupture features of nickel-base single crystal superalloy
水丽,金涛,田素贵,胡壮麒
17
Microstructure and mechanical properties of rapidly solidified NiAl-based eutectic alloy
李虎田,郭建亭,高强,叶恒强
18
Influence of boron on mechanical properties of M951 alloy
周鹏杰,于金江,胡壮麒,孙晓峰,管恒荣
19
Influence of cooling way on microstructure and stress rupture property of DZ951 nickel base alloy
夏鹏成,于金江,胡壮麒,孙晓峰,管恒荣
20
Microstructure and mechanical properties of Nb-doped NiAl-Cr(Mo) eutectic prepared by injection casting
淮凯文,郭建亭,杨锐,高强
21
Evolution of TaC morphology during directional solidification of Ni, Cr, Al-TaC in-situ composite
于金江,胡壮麒,张军,孙晓峰,管恒荣,傅恒志
22
Zinc matrix composites prepared by ultrasonic assisted casting method
潘蕾,陶杰,刘子利,陈照峰
23
Microstructure and thermal and electric conductivities of high dense Mo/Cu composites
陈国钦,武高辉,朱德志,张强,姜龙涛
24
Microstructure and properties of Sip/4032Al composite
XIU Zi-yang,ZHANG Qiang,SONG Mei-hui,ZHU De-zhi,WU Gao-hui
25
Damping characterization of magnesium matrix composites prepared by in-situ synthesis technique
张修庆,廖利华,马乃恒,王浩伟
26
Microstructure and properties of in-situ TiB2 particulates reinforced A356 composite
张亦杰,江盛玲,马乃恒,王浩伟,李险峰
27
Effective elastic moduli of in-situ A356/TiB2 composites
易宏展,李险峰,马乃恒,王浩伟,张亦杰
28
Copper matrix composites reinforced respectively with nano-SiO2 and nano-AlN particles
WU Yu-cheng,,,,
29
Microstructure and properties of copper matrix composites reinforced by nano-SiC and nano-Al2O3 particles
汪峰涛,吴玉程,任榕,王涂根,王文芳
30
Microstructures and wear-resistant properties of in-situ TiCp/ZA-12 composites
王香,连晓明,薛晓花
31
Mechanism of grain growth control in Ti(C, N)-based cermet during sintering
郑勇,于海军,卜海健
32
Microstructure and mechanical properties of Ti(C, N)-based cermets with different molybdenum contents
王赛玉,熊惟皓
33
Effect of sintering parameters on powder injection molded Ti(C, N)-based cermets
范畴,熊惟皓
34
Grain refinement technique of refractory low alloy steel
李庆芬,崔秀芳,龙萍,陈洪彬
35
Tribological property and high temperature oxidation behavior of Ni-based alloy
熊党生,林健明,朱和国,万轶
36
Nano-scaled metal powder improving tribological properties of lubricant
万轶,熊党生,王恒志
37
Effect of graphite contents on friction and wear properties of Ni-Cr-W composites
李建亮,熊党生,戴俊峰
38
Effect of minor aluminium addition in Cu47Ti34Zr11Ni8 bulk metallic glasses
孔见,熊党生,叶治淘
39
Aging precipitation and recrystallization in re-aged copper alloy
刘平,田保红,郅晓,雷静果,任凤章
40
Loss in coherency and coarsening behavior of Cr precipitates in Cu-Ag-Cr alloy
雷静果,任凤章,井晓天,刘平,田保红,郅晓
41
Microstructure and mechanical properties of spray-formed Cu-1.2Cr alloy
王晓峰,赵九洲,何杰,王江涛,李中原
42
Effects of RE-Ti composite modification on structure and properties of W6Mo5Cr4V2 alloy
宗学文,蒋志强
43
Microstructure and performance of electrodeposited nanocrystalline Ni-W alloys
任榕,吴玉程,舒霞,史成武,郑玉春,李云
44
Preparation and hot-dip galvanizing application of CeO2/Zn nanocomposite
骆心怡,左敦稳,王珉,李顺林,常华
45
Spheroidizing mechanism and practice of eutectic carbides in Fe-W-C alloy
蒋志强,杜建铭
46
Nanocrystalline 2J4 alloy processed by equal channel angular pressing
杜忠泽,王经涛,魏法明,杜建铭
47
Microstructure and properties of Ni-based superalloy sheet prepared by EB-PVD
赫晓东,宋广平,林秀,孙跃,李垚
48
Numerical simulation of mechanics of electron beam physical vapour deposition Ni/Ni3Al microlaminates
李垚,张小朋,赵奕杰
49
Upper bound analysis of thixotropic extrusion processes of semi-solid magnesium alloys
闫洪,杨滨,夏巨谌
50
Thickness distribution of large scale metallic sheet by EB-PVD on rotating substrate
单英春,赫晓东,李垚,李明伟
51
Lathe process of AZ91D magnesium alloy chips used in semi-solid thixomolding
吉泽升,洪艳,赵密
52
Shape evolution and prediction of three dimensional workpieces in electrochemical machining
WANG Lei,
53
Jet electrodeposition oriented by rapid prototyping
陈劲松,黄因慧,刘志东,田宗军,赵阳培
54
Pulse electroforming of nickel under perturbation of hard particles
朱增伟,朱荻,曲宁松,雷卫宁
55
Analysis of varying velocity on edge effects in laser bending
沈洪,石永军,姚振强,胡俊
56
Edge effects of metal plate in laser forming
石永军,沈洪,姚振强,胡俊
57
Heat-affected zone in pulsed laser cutting of titanium alloy
王扬,吕善进,裴剑英
58
Development of micro wire electrical discharge machining platform and its application
黄瑞宁,狄士春,迟关心,赵万生
59
Development of HSPECM set-up and its experiments
狄士春,赵万生,迟关心,吴海波
60
Diamond turning of titanium alloy by applying ultrasonic vibration
张元良,周志民,夏志辉
61
Sintering zone prediction in direct metal laser sintering by finite element method
沈显峰,黄建峰,王洋,杨家林,姚进
62
Application of improved vacuum degassing technique to refinement of heat resistant steel P91
刘江南,介万奇
63
Numerical modeling for electron-beam evaporated process of magnetic alloy Fe-6.5%Si
李晓,赫晓东,李垚
64
Novel approach for analysis of deformation behavior of thin-walled tube in free hydro-bulging process
杨连发,郭成
65
Effects of thermal cycling on shear strength of soldered joints of laminar ceramic resistor
薛松柏,王慧,胡永芳
66
Fracture mechanism of QFP micro-joints soldered with Sn-Pb and SnAgCu solders
薛松柏,史益平,胡永芳
67
FEM analysis of stress and strain and evaluation on reliability of soldered CBGA joints under thermal cycling
胡永芳,薛松柏,吴玉秀
68
Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis
曹健,冯吉才,李卓然
69
Effect of electrode wear on weld nugget formation in resistance spot welding of magnesium alloy
王亚荣,冯吉才,张忠典
70
Vacuum brazing of TiAl to 42CrMo steel with Ag-Cu-Ti filler metal
李玉龙,何鹏,冯吉才
71
Influence of filler metal and processing on brazed joints of TiAl alloy and 42CrMo
朱颖,王国建,李文轶,张茉,康慧,曲平
72
Interfacial reaction control during pulsed argon arc welding of SiCp/Al composites
张义平,王少刚,徐九华
73
Effect of fillet on bi-adhesive bonded aluminum lap joints
游敏,严沾谋,郑勇,熊惟皓,郑小玲,戴晟
74
Influence of electroless Sn/Bi on Sn/Pb soldered joint strength
禹胜林,朱小军,严伟
75
Precise laser welding of austenitic stainless steel
杨家林,黄文荣
76
Unweldable superalloy component repair using electro-spark deposition with high strength filler material
谢玉江,王茂才
77
Work hardening of adhesively bonded pure copper single lap joints
郑小玲,熊惟皓,郑勇,游敏,余海洲,刘文俊
78
Method of visional detecting MAG weld pool information
王克鸿,汤新臣,虞剑,游秋榕,沈莹吉
79
Physical origin of decrease in exchange coupling in Ga+ ion irradiated CoFe/IrMn films
王寅岗,李子全
80
A novel anti-corrosion coating for magnesium alloy
黄巍,李荻,郑天亮
81
Composite material of cermets made by SHS
王凤辉,焦安源,杨似琼,高兴歧
82
Thermal resistance of ceramic films on aluminum alloy by PECC
张秋明,赫晓东,李垚
83
High temperature oxidation behavior of (Ti, Al)N coating deposited by arc ion plating
刘爱东,杨世伟
84
Phase and microstructure of CVD alumina-silica coating deposited at relative low temperature
陈照峰,赵保荣,朱秀荣,严波,李聪
85
Effects of plasma microarc oxidation on mechanical properties of aluminum alloys
滕敏,赫晓东,李垚
86
Preparation process and friction-abrasion property of TiN/TiB2 multi-permeation layer
隗晓云,王建忠,刘燕萍,徐晋勇,高原,徐重
87
Ceramic alloying with Ti-N deposition and diffusion of multi-layers by plasma surface alloying technique
刘燕萍,徐晋勇,隗晓云,王建忠,高原,徐重
88
Plasma surface alloying with molybdenum and carburization of TiAl based alloys
刘小萍,许玮,梁文萍,郭朝丽,田文怀,徐重
89
Structure and properties of electrodeposition RE-Ni-W-B-B4C-PTFE composite coating
徐瑞东,郭忠诚,王军丽
90
Laser cladding of Ti-6Al-4V titanium alloy with Ti+TiC powders
武万良,张迎春,李学伟,孙俭峰
91
Fabrication of iron disilicide from multilayer by helicon plasma sputtering
沈鸿烈,杨颖,SAKAMOTO Isao,KOIKE Masaki,MAKITA Yunosuke
92
Formation and dispersal of rod-like α-SiAlON seed crystals synthesized by combustion method
傅仁利,J.M.F.Ferreira,杨克涛,陈克新
93
High temperature characteristic of hydroxyapatite-titania
汪涛,张文彦,D.R.Annett,S.Sabine
94
Preparation and modification of nano-sized Al2O3 powders through addition of oxide
CHEN Yong,WU Yu-cheng,,
95
Friction and wear properties of ion-implanted polymers
熊党生,李建亮
96
Effect of fly ash content and grit size on mechanical and tribological properties of PVC composites
林健明,熊党生
97
Fabrication of self-organized TiO2 nanotubes by anodic oxidation and their photocatalysis
陶海军,陶杰,汪涛,王玲,秦亮,徐璐璐
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)