ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 16    Sepecial 3    December 2006

Aluminum Materials

1
Solidification and remelting of Al through Al2O3 fibrous preform under centrifugal force
胡国新,刘建局,张利祥,田芩蔚
2
Explicit FE wrinkling simulation and method to catch critical bifurcation point in tube bending process
杨合,李恒,詹梅,谷瑞杰
3
Evolution of intermetallic phases of Al-Zn-Mg-Cu alloy during heat treatment
樊喜刚,蒋大鸣,孟庆昌,李念奎,孙兆霞
4
Thin-walled aluminum alloy tube NC precision bending based on finite element simulation
谷瑞杰,詹梅,李恒,杨合
5
Microstructure and mechanical properties of friction stir welded thin sheets of 2024-T4 aluminum alloy
李炼,佟建华,万发荣,龙毅
6
Structure optimization of porthole die based on aluminum profile extrusion process numerical simulation
吴向红,栾贻国,娄淑梅,马新武,赵国群
7
Semisolid metal forming by novel sloping plate process
管仁国,王超,尚剑洪,邢振环
8
EBSD analysis on aluminum brazing sheet for automotive heat exchangers
纪艳丽,郭富安,沈健生
9
Contrast of FEM and FVM in simulation of complex aluminum extrusion
李大永,周飞,苌群峰,彭颖红
10
Deformation and damage mechanism of aluminum alloy under different stress states
朱浩,朱亮,陈剑虹,车洪艳
11
Microstructures and tensile properties of hot-extruded composite Bi2O3-coated ABOw/Al composite
李志军,王黎东,岳红彦,费维栋
12
Interfacial study of semi-solid aluminum alloy and stainless steel sheathed extrusion
刘洪伟,郭成,刘旭峰,邵光杰
13
Distribution of Si particles in hypereutectic aluminum alloy tubes prepared under electromagnetic field
张志清,刘庆,李丘林,刘伟
14
Effect of evolution of polycrystalline textures on r-value of LF2 aluminum alloy
赵亦希,林忠钦,李淑慧,于忠奇
15
Deforming mechanism of non-mandrel drawing process of circular aluminium tube by simulation
权国政,周杰,王梦寒,权国辉,佟莹
16
Effect of laser shock processing on residual stress and fatigue behavior of 6061-T651 aluminum alloy
任旭东,张永康,周建忠,冯爱新
17
Microstructural evolution of aluminum alloy 3003 during annealing
吴文祥,张新明,孙德勤,胡国强,刘国金
18
A new model to describe effect of plastic deformation on elastic modulus of aluminum alloy
臧顺来,臧顺来,郭成,董伟,魏公际,谌峰,张珂
19
Micromechanical model for competition between intergranular and intragranular fracture in 7××× aluminum alloys
张新明,刘文辉,唐建国,刘胜胆
20
Compound fabrication technology of semi-solid billet of Al-Si alloy based on SIMA method
薛克敏,王清瑞,弭光宝
21
Effects of pitting corrosion on fatigue life of aluminum alloy Y12CZ based on initial discontinuity state
郁大照,陈跃良,胡家林,杨茂胜
22
Effects of deformation temperature and rate on compressive deformation behaviour of Y112 die cast aluminum alloy in semi-solid state
杨明波,胡红军,唐丽文,代兵
23
Numerical simulation of continuous roll-casting process of aluminum alloy
谢水生,杨浩强,黄国杰
24
Extrusion behavior of micro-nanostructured Al-18%Si alloy powders
梁红玉,欧阳志英,胡志恒,毛协民
25
Effect of Y2O3 on microstructure and mechanical properties of hypereutectic Al-20%Si alloy
杨亚锋,许长林,王慧远,刘畅,姜启川
26
Plastic flow pattern and its effect in friction stir welding of A2024 and A1060
王希靖,张忠科,李晶,达朝炳
27
Grain refinement of hypoeutectic Al-Si alloy prepared with ELTA by Al-4B master alloy
王明星,孟祥永,刘志勇,刘忠侠,翁永刚,宋天福,杨升
28
Effects of particle size on residual stresses of metal matrix composites
晏义伍,耿林,李爱滨
29
Low-cyclic fatigue properties of electrolytic low-titanium A356 alloys
刘忠侠,宋谋胜,翁永刚,王明星,宋天福,刘志勇
30
Comparison of microstructure and corrosion properties of Al-Zn-Mg-Cu alloys 7150 and 7010
孟庆昌,任时宇,张新梅,张宝友,樊喜刚
31
(Al63Cu25Fe12)p/A356 aluminum alloy composites prepared by spray co-deposition
李小平,徐洲
32
Microstructure and properties of in situ A356/TiB2 composite
乐永康,乐永康,陈东,马乃恒,王浩伟,张文静,毛健伟
33
Effects of trace addition of vanadium and depression amount on recrystallization temperature and mechanical performance of 5182 belts
高家诚,陈志强,王勇,崔先友,明文良,袁礼军
34
Effect of two-stage aging on superplasticity of Al-Li alloy
罗智辉,张新明,杜予晅,叶凌英
35
Superplastic behavior of Al-Cu-Li based alloy
杜予晅,张新明,叶凌英,罗智辉
36
Sound absorption and insulation property of closed-cell aluminum foam
尉海军,李兵,姚广春,罗洪杰,刘宜汉,王晓林
37
Interface structure and mechanical property of aluminum cooler vacuum brazing joint
冯涛,楼松年,吴鲁海,李亚江
38
Deformation behavior of A6063 tube with initial thickness deviation in free hydraulic bulging
杨连发,杨连发,郭成,邓洋
39
Effects of electromagnetic field intensity on as-cast microstructures and mechanical properties of Al-Zn-Mg-Cu-Zr alloy
左玉波,赵志浩,王启伟,崔建忠
40
Mensuration and simulation of mold filling process in emi-solid die-cast of aluminum alloy
杨弋涛,王建甫,张恒华,邵光杰
41
CO2 laser welding of 5A06 aluminum alloy plates with different thicknesses
余淑荣,余淑荣,樊丁,熊进辉,陈剑虹
42
Superplasticity and superplastic forming ability of Al-Mg-Sc alloy
陈明和,张杰刚,李金华,芮玉龙
43
Novel accelerated corrosion test for LY12CZ and LC4CS aluminum alloys
蔡健平,刘明
44
Effect of united refining and modification on mechanical properties of A356 aluminium alloys
左秀荣,仲志国
45
Influence of additive element on surface oxide film of A356 alloy
欧阳志英,梁红玉,毛协民,红梅
46
Function of grinding fly ash in production of aluminum foam
王永,姚广春,李兵
47
Numerical simulation of thermal-mechanical process of Al-Si-Pb alloy treated by high current pulsed electron beam
吕晓霞,李荣广,安健
48
Design method of electromagnetic field applied to Al-alloy electromagnetic casting
杨晶,党惊知,彭有根,程军
49
Effect of TiH2 on preparation of closed-cell aluminum foam and its compressive behavior
杨国俊,姚广春,尉海军
50
Sound absorption property of open-pore aluminum foams
王录才,王录才,王芳,武建国,游晓红
51
Aging behavior of AlNp/2024Al composites fabricated by squeeze casting
N. KONO,T. HAITANI
52
Thermo-physical properties of reproducible Sip/Al composites
修子扬,武高辉,宋美慧,朱德志
53
Stress—strain curves for different loading paths and yield loci of aluminum alloy sheets
吴向东,吴向东,万敏,韩非,王海波
54
Multi-wall carbon nanotubes reinforced aluminum composites synthesized by hot press sintering and squeeze casting
张学习,杨丽,邓春锋,王德尊
55
Simulation of local effect of reinforcement on temperature field during solidification of aluminum metal matrix composite
傅宇碧,张学习,王德尊
56
Effect of T6I6 and its modified processes on mechanical properties of novel high strength Al-Li alloy-2A97
袁志山,袁志山,陆政,谢优华,吴秀亮,戴圣龙,刘常升
57
Effect of coating thickness on microstructures and mechanical properties of C/Cu/Al composites
曹卓坤,姚广春,刘宜汉
58
Accelerated corrosion test and corrosion failure distribution model of aircraft structural aluminum alloy
柳文林,穆志韬,金平
59
Effect of Sr on forming properties of Al-Mg-Si based alloy sheets
卢广玺,陈海军,关绍康
60
Effects of heat treatment process on stress corrosion cracking and microstructures of 7A05 Al alloy plate
蔡刚毅,吕广庶,马壮
61
Determination of strain criterion of Portevin–Le Chatelier effect for aluminum alloy sheets
万敏,韩金全,金海霞,伍惠,董锦亮,李兵,顾伟
62
Effect of rare earth (RE) on diffusion of aluminum atoms in aluminizing
张伟,叶晓枫,庞碧君,周思凯
63
Microstructure and mechanical properties of 2D woven Grf/Al composite
张云鹤,张云鹤,武高辉,修子扬,张强,王春雨,陈国钦
64
Electroless nickel plated graphite fibers and surface behavior in Gr(Ni)/6061Al composite
王春雨,武高辉,张强,张云鹤,修子扬,陈国钦
65
Crystal preferential orientation of Al-1.0%Si alloy in continuous unidirectional solidification process
张鸿,王自东,谢建新,王瑛伟,陈亚军
66
Stress corrosion cracking susceptibility of 7A52 aluminum alloy
赵军军,王卫欣,蔡志海,张平
67
Corrosion resistance of 2195 aluminum alloy treated by multi-step-heating-rate controlled process
许越,刘玉峰,耿季平
68
Dendrite coherency point of A357 alloys
李建峰,寇宏超,王安家,傅恒志,胡锐,李金山
69
Constitutive description of casting aluminum alloy based on cylindrical void-cell model
陈斌,彭向和,吴新燕,孙士涛,曾祥国
70
Tensile properties of 2024 Al alloy processed by enhanced solid-solution and equal-channel angular pressing
许晓静,曹进琪,莫纪平,程晓农
71
Solidification microstructures and mechanism of grain refinement of electrolytic low titanium Al alloys
王爱琴,王爱琴,谢敬佩,刘忠侠,闫淑卿,李继文,王文焱
72
Pressureless infiltration processing and thermal properties of SiCp/Al composites with high SiC particle content
周贤良,邹爱华,华小珍,张建云,饶有海
73
Effects of Mg content on aging behavior of sub-micron Al2O3p/Al-Cu-Mg composite
姜龙涛,朱德智,陈国钦,修子扬,武高辉
74
Effects of tool flank wear on orthogonal cutting process of aluminum alloy
袁平,柯映林
75
Microstructures variation of spray formed Si-30%Al alloy during densification process
魏衍广,熊柏青,张永安,刘红伟,王锋,朱宝宏
76
Defect analysis of complex-shape aluminum alloy forging
单德彬,张艳秋,王勇,徐福昌,徐文臣,吕炎
77
Grain-refining persistency of Al-based alloy produced by electrolyzing
刘志勇,王明星,刘忠侠,翁永刚,宋天福,左秀容,杨昇
78
Simplified prediction model for elastic modulus of particulate reinforced metal matrix composites
王文明,王文明,潘复生,鲁云,曾苏民
79
Adhesive strength and structure of micro-arc oxidation ceramic coatings grown in-situ on LY12 aluminum alloy
吴振东,姚忠平,姜兆华
80
Dependence of phase selection on cooling rates in as-cast Al-Si-Mg alloys
何志,张瑞杰,刘永勤,介万奇
81
Key techniques of automatic gauge control and profile control for aluminium strip and foil
李谋渭,刘鸿飞,王向丽,尹凤福,边新孝,张磊,童朝南
82
Competitive growth of high purity aluminum grains in directional solidification
张佼,疏达,王德林,孙宝德,陈刚
83
Deformation and microstructure characterization during semi-solid extrusion of Al-4Cu-Mg alloy
卢雅琳,卢雅琳,李淼泉,李兴成
84
Effect of precipitation on elastic modulus of Al-Zn-Mg-Cu-Li alloys
赵中魁,周铁涛,刘培英,李焕喜
85
Localized corrosion of LY12CZ under stress in chloride media
饶思贤,张峥,朱立群,钟群鹏
86
Effect of titanium addition on fracture toughness behavior of ZL108 alloy
翁永刚,李姿景,刘文才,宋天福,刘志勇,王明星
87
Effect of magnesium in aluminum alloys on characteristics of microarc oxidation coatings
刘耀辉,于思荣,朱先勇,徐佰明,李颂
88
Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension
罗应兵,李大永,彭颖红
89
Effect of porosity on damping behavior of aluminum matrix-fly ash composites
窦作勇,武高辉,姜龙涛,丁佰锁,曹金华
90
Microstructure and damping behavior of SiCp/Gr/2024Al metal matrix composites by squeeze casting technology
冷金凤,武高辉
91
Structure and properties of ceramic coatings formed on aluminum alloys by microarc oxidation
刘万辉,鲍爱莲,刘荣祥,武万良
92
A new high strength and high tolerance-resistance Al-Li alloy
杨守杰,陆政,戴圣龙,韩雅芳,颜鸣皋

Magnesium Materials

93
As-cast microstructure of Mg-Al-Zn magnesium alloys
张静,潘复生,杨明波,李忠盛
94
Microstructure and mechanical properties of AZ31-0.5%Si alloy processed by ECAP
王渠东,陈勇军,张陆军,林金宝,翟春泉
95
Improvement of corrosion resistance of AZ91D magnesium alloy by gadolinium addition
周学华,周学华,卫中领,陈秋荣,甘复兴
96
Mechanical properties of Mg-9Gd-4Y-0.6Zr alloy
肖阳,陈部湘,邓桢桢,张新明
97
Interface reaction and thermodynamic analysis on Al2O3-SiO2(sf)/AZ91D composite
李文芳,刘贯军,彭继华,杜军
98
Establishment of hydrogen measurement system for magnesium alloy melt
许四祥,吴树森,毛有武,安萍
99
Numerical simulation of microstructure formation of AZ91 using mCA method
何柏林,黎秋萍,齐清岩,姚向东
100
Effect of vacuum on solidification process and microstructure of LFC magnesium alloy
刘子利,刘子利,刘希琴,徐江,郭华明,潘青林,周海涛
101
Microstructures and mechanical properties of AZ91D magnesium alloy processed by low pressure die casting
蒋海燕,于彦东,翟春泉,付彭怀
102
Age hardening characteristics and mechanical properties of Mg-3.5Dy-4.0Gd-3.1Nd-0.4Zr alloy
李德辉,董杰,曾小勤,卢晨,丁文江
103
Effect of cooling rate on microstructure and compressive performance of AZ91 magnesium alloy
杨林,冯辉,邱克强,陈立佳,刘正
104
Microstructure and mechanical properties of Mg-6Al-4RE-0.4Mn alloy
王建利,彭秋明,吴耀明,王立民
105
Effects of Zn content on as-cast microstructure and mechanical properties of Mg-xZn-4A1 alloys containing TiC and rare earth elements
白亮,潘复生,杨明波
106
Effect of minor RE addition on microstructures and mechanical properties of AZ31 magnesium alloy
钟皓,闫蕴琪,张慧,翁文凭,陈琦
107
Annealing behavior of rolled AZ31 alloy sheet
彭伟平,曾攀,李培杰
108
Compression behavior of magnesium-lithium alloy at room temperature
王聪,李卓群,徐永波,韩恩厚
109
Precipitation behavior and effect of new precipitated β phase in AZ80 magnesium alloy
唐伟,韩恩厚,徐永波,刘路
110
Microstructure, mechanical properties and age-hardening of Mg-Li alloy sheets
李红斌,姚广春,郭志强,吉海宾,刘宜汉
111
Effects of hot extrusion and annealing treatment on microstructures, properties and texture of AZ31 Mg alloy
张慧,闫蕴琪,翁文凭,陈琦,钟皓
112
Effects of Ca addition on tensile properties and microstructures of hot-extruded AZ91 alloy tube
王峰,刘正,于宝义,张奎
113
Tensile properties of AZ31 sheet/bar and effects of texture
G. ITOH,Y. MOTOHASHI
114
Microstructures and mechanical properties of hot rolled AZ31 Mg alloy sheets
范立坤,董杰,曾小勤,丁文江,张平
115
Effect of large deformation on microstructure of ZK60 alloy
林金保,林金保,王渠东,陈永军,张陆军,丁文江
116
Influence of texture and microstructure on mechanical properties of high-strength wrought magnesium alloy AZ80
J. LINDEMANN,C. LEYENS
117
Hot deformation behavior and processing map of squeeze cast ZK60 magnesium alloy
王春艳,王春艳,吴昆,郑明毅
118
Mechanical properties and microstructures of hot extruded AE42 alloy with addition of zinc
王峰,刘正,陈立佳,于宝义,林立
119
Microstructure and mechanical properties of hot-rolled Mg-Zn-Y-Zr magnesium alloy
闫宏,陈荣石,韩恩厚
120
Influence of hot extrusion on microstructure and mechanical properties of AZ31 magnesium alloy
王岭,田素贵,孟凡来,杜洪强
121
Effect of erbium on microstructure and thermal compressing flow behavior of Mg-6Zn-0.5Zr alloy
王忠军,邵晓宏,张彩碚,崔建忠,乐启炽
122
Effect of rolling process on microstructures and mechanical properties of AZ31B alloy sheets
乐启炽,张志强,崔建忠
123
Influence of multilayer coatings on AZ31 deposited by electron beam evaporation
王雪敏,曾小勤,姚寿山,赖依建
124
Corrosion and electrochemical behavior of AZ31D magnesium alloys in sodium chloride
单大勇,韩恩厚,柯伟,周婉秋,周婉秋
125
Effect of T4 and T6 treatment on corrosion of die cast AZ91D magnesium alloys in 3.5% NaCl
周婉秋,周婉秋,单大勇,韩恩厚,柯伟
126
Electroplating zinc transition layer for electroless nickel plating on AM60 magnesium alloys
王晓民,周婉秋,周婉秋,韩恩厚
127
Improving wear resistance of magnesium alloy AZ91D by TiN-CrN multilayer coating
缪强,缪强,崔彩娥,潘俊德,张平则
128
Corrosion behavior of WE54 magnesium alloy in 3.5%NaCl solution
李卓群,陈荣石,柯伟,韩恩厚,单大勇
129
Influencing factors of surface roughness of MAO ceramic coating on AZ91D
狄士春,迟关心,潘明强
130
Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation
赵晖,赵晖,刘正,陈立佳,陈吉,韩忠
131
Influence of pH value on chromate-free conversion coating for magnesium alloys
翁文凭,陈琦,张慧,闫蕴琪,钟皓
132
Direct electroless Ni-P plating on AZ91D magnesium alloy
李忠厚,渠毓萍,郑峰,戴阿赶
133
Thickness effects on corrosion and wear resistance properties of micro-arc discharge oxide coatings on AZ91D magnesium alloys
黄伟九,刘明,李兆峰,曾荣昌
134
Effect of heat diffusion on properties of zinc-aluminum coating on AZ91D magnesium alloys
李兆峰,黄伟九,刘明
135
A novel electroless silver depositing method for magnesium alloys
赵惠,崔建忠
136
Processing and mechanical properties of SiC particulate reinforced AZ91 composites fabricated by stir casting
王晓军,吴昆,彭德林,张海峰,郑明毅,黄文现
137
Structural characterization and property of in-situ synthesized AZ91-Mg2Si composite
董龙祥,许国根,王立民,吴耀明,豆传国
138
Synthesis of Mg-Cu-Gd amorphous alloy by mechanical alloying and its thermal stability
许春霞,潘复生,汤爱涛,胡耀波,王敬丰
139
Grain refinement of Mg-Al magnesium alloys by carbon inoculation
王朝辉,康永林,赵鸿金,徐跃
140
Preparation of AZ91 alloy by powder metallurgy method
I. S. HUMAIL,WANG Xi-tao
141
Preparation and characterization of porous magnesium materials
刘希琴,刘子利,张晓红,丰俊东,俞挞汐
142
Grain size refinement of magnesium composite alloys by addition of B2O3
S. TANAKA,M. TSUSHIDA,S. ANDO,H. TONDA
143
Development of magnesium composite alloy by a new method combining B2O3 addition and melt stirring
卜乐平,S.TANAKA,M. TSUSHIDA,S. ANDO,H. TONDA
144
Microstructure and mechanical properties of AZ31 Mg alloy processed by high ratio extrusion
陈勇军,林金宝,张陆军,翟春泉,王渠东
145
Fretting wear behavior of AZ91D magnesium alloy
陈安华,黄伟九,李兆峰
146
Effect of Mg-Zn-Y quasicrystals on microstructure and mechanical properties of AZ91 alloy
张金山,裴利霞,杜宏伟,许春香,卢斌峰,梁伟
147
Effects of heat-treatment on microstructure of wrought magnesium alloy ZK60
麻彦龙,麻彦龙,潘复生,左汝林,张津,杨明波

Aerospace Materials

148
Effect of anisotropy on microstructure and high temperature stress rupture properties of Ni3Al base single crystal alloy
孔志刚,李树索,韩雅芳
149
Influence of microstructure stability on creep properties of single crystal nickel base superalloys
田素贵,孟凡来,杜洪强,王春涛,水丽,胡壮麒
150
Rapid manufacture of Ni-based superalloy components by three-dimensional printing
H. A. KUHN
151
γ/γ′ interface strengthening of Re in single crystal superalloys
骆宇时,李嘉荣,刘世忠,韩梅,曹春晓
152
Microstructure and interface reaction of investment casting TiAl alloys
陈玉勇,孔凡涛,王雪,肖树龙
153
Diffusion bonding of Ti-6Al-4V by pulse current heating and hot-pressing
何代华,傅正义,王为民
154
Effect of rare earth additives on alumina fiber development in Ti-Al intermetallic matrix composites
王芬,王芬,范志康,林营
155
Microstructure and mechanical properties of Al2O3/TiAl composite
艾桃桃,王芬,朱建锋
156
Synthesis of TiAl-Ti2AlN composites by in-situ crystallization
朱建锋,朱建锋,高积强,王芬
157
Porosity and surface roughness simulation of nickel-aluminum coating in plasma spray forming
曾好平,徐文骥,方建成,赵紫玉,王莉
158
Phase composition and structure of grain boundary of oversintered Y3Al5O12 ceramics
李长青,左洪波,韩杰才,张明福,孟松鹤,姚泰
159
Microstructure and properties of modified and conventional 718 alloys
刘芳,刘芳,孙文儒,郭守仁,杜金辉,董建新,杨洪才,胡壮麒
160
Effects of secondary precipitation on recrystallization in Co-base superalloy DZ40M
赵阳,于腾,宋秀,王磊
161
Tensile and fracture behavior of DZ951 Ni-base superalloy
储昭贶,储昭贶,于金江,赵乃仁,孙晓峰,管恒荣,胡壮麒
162
Effects of electric field treatment on microstructures of GH4199 superalloy after long-term aging
刘杨,王帅,王磊,乔雪璎,王延庆
163
Influence of phosphorus on oxidation behavior of low thermal expansion superalloy IN909 at 650 ℃
N. K. PARK
164
Density of liquid NiCoAlCr quarternary alloys measured by modified sessile drop method
方亮,张淑芳,杨凌川,董建新,肖锋,曹春兰,陶再南,
165
Isothermal oxidation behavior of cast Ni-base superalloy K44
李云,刘学贵,郭建亭,袁超,杨洪才
166
Effect of carbon on microstructure and mechanical properties of DD99 single crystal superalloy
于金江,孙晓峰,管恒荣,胡壮麒,赵乃仁,金涛
167
Effect of cobalt on chemical segregation and solution process in Re-containing single crystal superalloys
王文珍,王文珍,金涛,赵乃仁,王志辉,孙晓峰,管恒荣,胡壮麒
168
Laser engineered net shaping of Co-based superalloys
薛春芳,戴耀,田欣利
169
Morphological evolution of γ′ phase in K465 superalloy during thermal fatigue
杨金侠,杨金侠,郑启,孙晓峰,管恒荣,胡壮麒
170
Finite element analysis of γ′-phase raft mechanism in Ni-based single crystal superalloy
吴文平,汪越胜,郭雅芳
171
Mechanical properties and microstructure of Fe3Al intermetallics fabricated by mechanical alloying and spark plasma sintering
何箐,贾成厂,孟杰
172
Compressive behavior of NiAl/(Cr,Mo)Hf alloy prepared by high-pressure die casting and hot isostatic pressing
杜兴蒿,郭建亭,武保林
173
Effect of Cr on high temperature oxidation of TiAl
董自强,姜惠仁,冯晓然,王中雷
174
High-temperature oxidation behavior of Nb67-xW15Si18Hfx(x=0, 5 and 10) alloys
姜荣丽,刘东明,沙江波,马岳
175
Analysis of electron structure of γ/α2 phase boundaries in ternary TiAl intermetallics
孔凡涛,陈玉勇
176
Phase-field simulation of phase separation in Ni75AlxV25-x alloy with elastic stress
李永胜,陈铮,卢艳丽,王永欣
177
Microstructure and high-temperature mechanical properties of Nb-silicide based in-situ composites
刘东明,姜荣丽,沙江波
178
Effect of carbon on tribological property of plasma carburized TiAl based alloy
刘小萍,刘小萍,田文怀,郭朝丽,贺志勇,徐重
179
Effect of Si content on mechanical properties of Nb-Si based alloys with NbSS/ Nb5Si3 structure
郑鹏,刘东明,宫声凯,徐惠彬,沙江波
180
Structural defects in L10 FePt by modified analytic embedded-atom method
舒小林,陈强,陈子瑜,胡望宇
181
Oxidation behavior of ternary Fe-15Cu-5Al and Fe-85Cu-5Al alloys in pure oxygen at 900 ℃
向军淮,向军淮,向军淮,牛焱,段先志
182
Effect of 5%Cr on oxidation of Ni-10Al in 0.1MPa O2 at 900 ℃ and 1 000 ℃
张学军,张学军,高春香,牛焱
183
Microstructure and properties of β-NiAl and its eutectic alloy with Cr and Mo additions
张志刚,刘先斌,宫声凯,徐惠彬
184
Oxidation and hot corrosion behavior of Ti2AlNb-based alloy with and without enamel coating at 800 ℃
郑德有,熊玉明,朱圣龙,李明升,王福会
185
Synthesis of TiAl-Al2O3 composites by high energy milling and hot-press sintering
朱建锋,朱建锋,高积强,王芬
186
Effect of deformed microstructure on mechanical properties of Ti-22Al-25Nb alloy
程云君,李世琼,梁晓波,张建伟
187
Microstructure and high temperature mechanical properties of laser rapidly formed Ti-6Al-4V alloy
薛蕾,林鑫,吕晓卫,王维,黄卫东,陈静
188
Flow behavior and microstructure evolution during hot compression of TA15 titanium alloy
徐文臣,单德彬,杨国平,吕炎
189
Hydrogen-induced hot workability in Ti-6Al-4V alloy
宗影影,单德彬,吕炎,郭斌
190
Aging properties and microstructures of Ti-B20 titanium alloy
葛鹏,葛鹏,赵永庆,周廉
191
Plasma boronizing of Ti6AlV4 using solid precursors by double glow plasma alloying technique
秦林,曲均志,林乃明,范爱兰,常大庆,唐宾
192
Isothermal precision forging of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy impeller with twisted blades
单德彬,史科,徐文臣,吕炎
193
Flow behavior of Ti-46.2Al-2.5V-1.0Cr-0.3Ni alloy in secondary hot deformation
司家勇,韩鹏彪,昌霞,张继
194
Influence of processing parameters on microstructure and wear resistance of Ti+TiC laser clad layer on titanium alloy
武万良,孙俭峰,董胜敏,刘荣祥
195
Plasma surface alloying of titanium alloy for enhancing burn-resistant property
张平则,徐重,姚正军,张高会,贺志勇
196
Laser rapid forming of low cost hydride-dehydride titanium alloy powder
陈静,张凤英,林鑫,谭华,黄卫东
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)