ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 16    Sepecial 2    September 2006

Selected Papers from The 6th International Workshop on Advanced Intermetallic and Metallic Materials

1
Oxidation behavior of Ni(Co)CrAlYHf(Si) coatings on DS superalloy at 1 150 ℃
黄朝晖,谭永宁,赵希宏,李建平,张强
2
Microstructures and properties of graphite and Al2O3 short fibers reinforced Mg-Al-Zn alloy hybrid composites
刘勇兵,宋起飞,安健
3
Incomplete transformation of Ti-Ni-X ternary shape memory alloy
何向明,张淑芳,李明升,多树旺,向军淮,张荣发
4
Oxidation and thermal fatigue of EB-PVD thermal barrier coatings on tube superalloy substrate
ZHANG Chun-xia,ZHOU Chun-gen,GONG Sheng-kai,XU Hui-bin
5
Surface modification of Al-Pb alloy by high current pulsed electron beam
刘勇兵,李世龙,安健,陆有
6
Influence of surface modification on isothermal oxidation behavior of EB-PVD NiAl coating
陶淑风,江阔,A. HESNAWI,宫声凯
7
Mechanical and magnetostrictive properties of Tb0.36Dy0.64(Fe1-xMnx)1.9 alloys
马天宇,蒋成保
8
Effect of Nb on oxidation behavior of NiTiNb alloys
徐舰,赵新青
9
Surface treatment of 0.20% C carbon steel by high-current pulsed electron beam
徐国成,付石友,关庆丰
10
Microstructure of reactive sintered Al bonded Si3N4-SiC ceramics
崔崇,王媛婷,江金国,陈光,孙强金
11
Application of an analytical phase transformation model
王海丰,杨长林,陈正,杨伟,杨根仓
12
Phase and microstructure selection in directionally solidified peritectic alloys with convection
苏彦庆,李新中,郭景杰,吴士平,丁宏生,傅恒志,傅恒志
13
Characterization and wear properties of nanoscaled TiN/TaN multilayer coatings
安健,张庆瑜
14
Direct electroless Ni-P deposition on AM50 magnesium alloy from sulfate bath
李光玉,连建设,牛丽媛,江中浩,谷长栋
15
Microstructure and property of zinc phosphate coating on die-casting magnesium alloy AZ91D
李光玉,连建设,牛丽媛,江中浩
16
Oxidation and corrosion behavior of titanium aluminum nitride coatings by arc ion plating
李明升,冯长杰,张志峰,王福会
17
Magnetic and mechanical properties of FeSi alloys with high Si content
卢风双,乔梁,毕晓昉
18
Hafnium carbide structural foams synthesized from polymer precursors
Yang Hong
19
Undercooling and rapid solidification of Nb-Si eutectic alloys studied by long drop tube
王育人,董树勇,魏炳忱,李维火
20
Cathode electrophoretic technology for bonded NdFeB permanent magnet
陈刚,陈刚,杨小玲,高淡英,倪建森,徐晖,周邦新
21
Preparation technology and magnetic properties of Nd9.5Fe77B6Co5Zr2.5 nanocomposite magnets
黄照华,倪健森,徐晖,王占勇,周邦新
22
Effect of Al addition on properties of TiNiFe shape memory alloys
肖莉,徐惠彬,刘福顺
23
Combining cellular automata and Monte Carlo algorithm to simulate three-dimensional grain growth
Wang Wei
24
Carbon solubility in Cu-based composite prepared by mechanical alloying
冉旭,刘勇兵,包晓军,刘学然,安健
25
Influence of powder characteristics on structure and properties of Ni3Al fabricated by spark plasma sintering
孟杰,贾成厂,何箐
26
Filling analysis for thixomolded process of AZ91D magnesium alloy
刘勇兵,曹占义,崔晓鹏
27
Creep behavior and microstructure evolution of directionally solidified superalloy IC10 at high temperature
赵希宏,黄朝辉,孙跃军,徐惠彬
28
Electrical properties of La0.6Sr0.4Co1-yFeyO3 cathode material
江金国,崔崇,刘金强
29
Effect of Nb in (La0.5Ce0.5)64-xAl16Ni5Cu15Nbx (x=0-5) bulk metallic glasses
张国庆,刘金芳,曾乔石,蒋建中,汪丽娜,刘今强
30
TEM microstructure of mechanically alloyed Ti-12Mg powders
T. S. KIM,J. C. BAE,B. T. LEE,J. P. AHN,J. K. PARK
31
Calculation of cooling rate of amorphous aluminum alloy melt-spun ribbons
何世文,刘咏,黄伯云,刘祖铭
32
Influence of coupling with calculation of phase diagrams on microsegregation forming simulation of Al-4.5%Cu alloy
刘永刚,陈光,孙国雄
33
Continuous and directional solidification technology of titanium alloys with cold crucible
陈瑞润,丁宏升,毕维生,傅恒志,郭景杰
34
Inhomogeneity and anisotropy of microstructure and mechanical properties in severe plastic deformation processed pure copper
康锋,王经涛,杜忠泽
35
Preparation of Ti-based amorphous brazing alloy
邹家生,蒋志国,许志荣,陈光
36
Thermal stability of Al-Mg-Sc-Zr alloy
赵卫涛,闫德胜,戎利建
37
Modified cellular automaton model for modeling of microstructure and microsegregation in solidification of ternary alloys
朱鸣芳,CAO Wei-sheng,XIE Fan-you,CHANG Y. Austin,CHEN Shuang-lin,HONG Chun-pyo
38
Insensitivity on tensile properties of forged Mg-13Li-X alloy to hot-rolling deformation
栗丽,李焕喜,周铁涛,陈昌麒,邬秋林,章清泉,傅祖明
39
Optimization of mechanical properties of cast NiAl-28Cr-5.5Mo-0.5Hf alloy
郭建亭,高强,淮凯文,李虎田,李谷松
40
Effect of intermetallic compound β-Mg17Al12 on ductility of AZ91D magnesium alloy
黄巍,李荻
41
Ultrahigh performance of Ti-based glassy alloy tube sensor for Coriolis mass flowmeter
马朝利,A. Inoue,张涛
42
Isothermal corrosion (γ′+γ) Ni3Al alloy in liquid zinc
王文俊,王艳丽,陈国良,林均品
43
Influence of low-temperature nitridation on low-frequency magnetization of Fe82Nb7B10Cu1 nanocrystalline alloy ribbons
徐锋,吴小玲,李山东,彭坤,陈光,都有为
44
Numerical simulation for thermal flow filling process of casting
陈晔,赵宇宏,侯华
45
3D finite element method analysis of deformation and temperature rise during equal-channel angular pressing
张新平,陈光,汪雪,林杰,吴媚
46
Microstructural evolution in high Nb containing TiAl alloys by reactive hot pressing
王衍行,林均品,王艳丽,陈国良,贺跃辉

Selected Papers from The 5th International Forum on Advanced Material Science and Technology

47
Effect of shot peening and grit blasting on surface integrity: Influence on residual stresses
K.TOSHA,LU Jian
48
Manipulation of space charge in silicon by intentional thermal donor activation
E. TUOMINEN,HARKONEN,P. LUUKKA,K.TOSHA
49
Special-shaped tube drawing forming and conformal optimization of die cavity
齐红元,朱衡君
50
Biocompatibility and preliminary clinical application of HA/HDPE nanocomposites synthetic auditory ossicle
朱晒红,王国慧,赵颜忠,戚悠飞,周科朝,黄伯云,黄苏萍,李志友
51
Effect of stoichiometric ratio upon electrochemical properties of AB5-type alloys
于丽敏,傅钟臻,傅钟臻,蒋文全,蒋利军,张文广
52
Preparation of Mo/Cu composites by SLS method andits post-treatment techniques
刘斌,白培康,王建宏,程军
53
Dynamic recrystallization behavior of commercial pure aluminum
李慧中,张新明,陈明安,张新明,陈明安,刘子娟
54
Solvothermal synthesis of grain size controlled nanocrystalline SnO2
徐盛明,徐盛明,陈崧哲,吴芳,李林艳
55
Preparation and characterization of LiFePO4 thin films as cathode materials for lithium ion battery
肖卓炳,麻明友
56
Ploughing-extrusion mechanism of V-shaped capillary micro-grooves based on surface of copper strip
池勇,陈锦昌,邓学雄,刘小康,刘晓晴,汤勇,刘林
57
Formation mechanism of external finned tubes by extrusion-plough method
汤勇,陆龙生,潘敏强,刘小康,刘晓晴
58
Solution-deposited Li4Ti5O12 thin films as anode for lithium ion battery
吴显明,麻明友,陈上,肖卓炳,何则强,刘建本
59
Zn-Ni double metal cyanide complex: A novel effective catalyst for copolymerization of propylene oxide and carbon dioxide
陈上,肖卓炳,麻明友,刘建本,张兴宏,戚国荣
60
Electrochemical characteristics of Sn-Al-P-B composites synthesized by rheological technique
何则强,肖卓炳,熊利芝,何则强,麻明友,陈上,吴显明
61
Analysis of flow stress of ZK60 wrought magnesium at elevated temperatures
杨亚琴,李保成,张治民,张星
62
Phase field model for strong anisotropy of kinetic and highly anisotropic interfacial energy
张国伟,侯华,程军
63
Hydrogen behavior in titanium aluminide alloys
潘保武,褚武扬
64
Computer simulation for precipitation process of θ (Ni3V) and γ′ (Ni3Al) with microscopic phase-field method
侯华,徐宏,徐宏,赵宇宏
65
Microstructure evolution and effect on mechanical property in AZ80 Mg alloy during thermal processing
王强,张治民,李保成,李旭斌
66
Mechanism of effect of rare earth oxides on high temperature corrosion resistance of weld metal
李志勇,王宝,张汉谦
67
Influence of aging on microstructure and properties of ZK60 magnesium alloy
张治民,张星,杨亚琴
68
Modeling simulation and experimental validation for mold filling process
侯华,巨东英,D. SAITO,毛红奎
69
Nanometer bismuth oxide produced by resistance heating vapor oxidation
丘克强
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)