ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 22    Sepecial 3    December 2012
1
HR-TEM and FIB-SEM characterization of formation of eutectic-like structure from amorphous GdAlO3-Al2O3 system
Y. H. HAN, Y. HARADA, J. F. SHACKELFORD, Jaehyung LEE, K. KAKEGAWA
2
Effects of elastic-plastic properties of materials on residual indentation impressions in nano-indentation using sharp indenter
Jung-Min LEE, Chan-Joo LEE, Kyung-Hun LEE, Byung-Min KIM
3
Weldability evaluation and tensile strength estimation model for aluminum alloy lap joint welding using hybrid system with laser and scanner head
Dong-Yoon KIM, Young-Whan PARK
4
Material properties of friction stir spot welded joints of dissimilar aluminum alloys
Chi-Sung JEON, Sung-Tae HONG, Yong-Jai KWON, Hoon-Hwe CHO, Heung Nam HAN
5
Effect of SiC particles on microstructure and mechanical property of friction stir processed AA6061-T4
Don-Hyun CHOI, Yong-Il KIM, DAE-Up KIM, Seung-Boo JUNG
6
Friction stir butt welding of A5052-O aluminum alloy plates
Sung-Ook YOON, Myoung-Soo KANG, Hyun-Bin NAM, Yong-Jai KWON, Sung-Tae HONG, Jin-Chun KIM, Kwang-Hak LEE, Chang-Yong
7
Influence of tool plunge depth and welding distance on friction stir lap welding of AA5454-O aluminum alloy plates with different thicknesses
Jun-Won KWON, Myoung-Soo KANG, Sung-Ook YOON, Yong-Jai KWON, Sung-Tae HONG, Dae-Il KIM, Kwang-Hak LEE, Jong-Dock SEO
8
Influences of tool plunge speed and tool plunge depth on friction spot joining of AA5454-O aluminum alloy plates with different thicknesses
Sung-Ook YOON, Myoung-Soo KANG, Yong-Jai KWON, Sung-Tae HONG, Dong-Hwan PARK, Kwang-Hak LEE, Chang-Yong LIM, Jong-D
9
Fabrication of SiCp/AA5083 composite via friction stir welding
Byung-Wook AHN, Don-Hyun CHOI, Yong-Hwan KIM, Seung-Boo JUNG
10
Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals
Taeshin CHUNG, Jungsoo KIM, Jeongseok BANG, Byoungho RHEE, Daegeun NAM
11
Effect of bonding interface on delamination behavior of drawn Cu/Al bar clad material
Sangmok LEE, Min-Geun LEE, Sang-Pill LEE, Geun-Ahn LEE, Yong-Bae KIM, Jong-Sup LEE, Dong-Su BAE
12
Effect of strain, strain rate and temperature on workability of AZ80 wrought magnesium alloy
Lü Wen-quan, QUAN Guo-zheng, YU Chun-tang, ZHAO Lei, ZHOU Jie
13
Microforming of superplastic 5083 aluminum alloy
Md. Abu Mowazzem HOSSAIN, Sung-Tae HONG, Kyu-Yeol PARK, Young-Sang NA
14
Effect of alloying on high temperature fatigue performance of ZL114A (Al-7Si) alloy
DONG Xu-gang, ZHOU Jie, JIA Yao-jun, LIU Bin
15
Determination of critical parameters for dynamic recrystallization in Ti-6Al-2Zr-1Mo-1V alloy
XIA Yu-feng, LIU Ying-ying, MAO Yuan-ping, QUAN Guo-zheng, ZHOU Jie
16
Grain size dependence of flow stress in ECAPed Ti with constant texture
Chang-Young HYUN, Ho-Kyung KIM
17
Effect of processing temperatures on characteristics of surface layers of low temperature plasma nitrocarburized AISI 204Cu austenitic stainless steel
Insup LEE
18
Laser-assisted deposition of Cu bumps for microelectronic packaging
Won-Seok CHOI, Joohan KIM
19
Microstructure of porous Cu fabricated by freeze-drying process of CuO/camphene slurry
Sung-tag OH, Si-young CHANG, Myung-jin SUK
20
Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes
HE Peng, Lü Xiao-chun, LIN Tie-song, LI Hai-xin, AN Jing, MA Xin, FENG Ji-cai, ZHANG Yan, LI Qi
21
Modification of mechanical properties by TiO2 nano-particle for biodegradable materials made from palm oil sludge and activated sludge cake
Panithi YUTHAVISUTHI, Lerpong JARUPAN, Chiravoot PECHYEN
22
Synthesis of Fe3O4-coated silica aerogel nanocomposites
Jun Sung LEE, Eun Jung LEE, Hae Jin HWANG
23
Synthesis of tin nanoparticles through modified polyol process and effects of centrifuging and drying on nanoparticles
Sang-Soo CHEE, Jong-Hyun LEE
24
Effective parameters on diameter of carbon nanotubes by plasma enhanced chemical vapor deposition
Kang Young JEONG, Hyun Kyung JUNG, Hyung Woo LEE
25
Polyaniline and multi-walled carbon nanotube composite electrode for rechargeable battery
Yu-Jeong LIM, Min-Young PARK, Sang-Keol LEE , Won-Ki LEE , Nam-Ju JO
26
Microstructure evolution and mechanical properties of Ti-B-N coatings deposited by plasma-enhanced chemical vapor deposition
Jung Ho SHIN, Kwang Soo CHOI, Tie-gang WANG, Kwang Ho KIM, Roman NOWAK
27
Synthesis and properties of Cr-Al-Si-N films deposited by hybrid coating system with high power impulsemagnetron sputtering (HIPIMS) and DC pulse sputtering
Min Su KANG, Tie-gang WANG, Jung Ho SHIN, Roman NOWAK, Kwang Ho KIM
28
Growth of BaTiO3-Ag hybrid composite films at room temperature by aerosol deposition
Young Joon YOON, Sung Hwan CHO, Jihoon KIM, Hyo Tae KIM, Hong Koo BAIK, Jong-Hee KIM
29
Effect of substrate bias on microstructure and tribological performance of GLC films using hybrid HIPIMS technique
ZHANG Xue-qian, KE Pei-ling, WANG Ai-ying, HUANGMei-dong, Kwang Ho KIM
30
Comparison of electrochemical properties of atmospheric pressure plasma coatings for Al2O3-3TiO2 and CoNiCrAlY in sea water
Seong-jong KIM, Seong-kweon KIM, Jae-cheul PARK
31
Electrochemical characteristics of HVOF spray coated layer with WC-27NiCr and WC-10Co4Cr for Al bronze
Min-su HAN, Seung-jun LEE, Min-sung KIM, Seok-ki JANG, Seong-jong KIM
32
Corrosion resistance of composite coating on magnesium alloy using combined microarc oxidation and inorganic sealing
YANG Wei, WANG Ai-ying, JIANG Bai-ling
33
Ultrasonic-assisted vibration tapping using taps with different coatings
Chung-chen TSAO, Kei-lin KUO
34
Wear characteristics of V shape diamond tool for micro prism pattern with Al alloys
Eun-Suk PARK, Tae-Jin JE, Hwan-JinCHOI, Eun-ChaeJEON, Myung-Chang KANG
35
Machining performance on hybrid process of abrasive jet machining and electrical discharge machining
Yan-cherng LIN, Yuan-feng CHEN, A-cheng WANG, Wan-lin SEI
36
Material properties and machining performance of hybrid Ti2AlN bulk material for micro electrical discharge machining
Eui-Seong CHOI, Jinwoo SUNG, Qi-min WANG, Kwang-Ho KIM, Ahmed BUSNAINA, Myung Chang KANG
37
Diamond machining of sinusoidal grid surface using fast tool servo system for fabrication of hydrophobic surface
Hong LU, Deug-Woo LEE, Sang-Min LEE, Jeong-Woo PARK
38
Rotary ultrasonic-assisted milling of brittle materials
KUO Kei-lin, TSAO Chung-chen
39
Surface effects of hybrid vibration-assisted femtosecond laser system for micro-hole drilling of copper substrate
Jung-Kyu PARK, Ji-Woon YOON, Myung-Chang KANG, Sung-Hak CHO
40
Internal modification in transparent hybrid germanium-silica plates using plasma formation induced by a femtosecond laser
Ji-Wook YOON, Jung-Kyu PARK, Kwang-Ho KIM, Myung-Chang KANG, Sung-Hak CHO
41
Process analysis of direct laser melting to fabricate layered hybrid beads
Jeong-hwan JANG, Sung-min MUN, Tae-hyun KIM, Young-hoon MOON
42
Microstructure of fast tool servo machining on copper alloy
Hong LU, Soo-chang CHOI, Sang-min LEE, Deug-woo LEE
43
An effective round ball tool in electrochemistry process as novel reuse fabrication technology
P. S. PA
44
FEA technique of hot plate forming process using cell-typed die with cooling device
Jung-Min LEE, In-Kyu LEE, Kyung-Hun LEE, Dae-Soon KIM, Byung-Min KIM
45
Deformation prediction of porcelain-enameled steels with strain history by press forming and high-temperature behavior of coating layer
Young-Ki SON, Chan-Joo LEE, Jung-Min LEE, Byung-Min KIM
46
Mathematical model determination for improvement of surface roughness in magnetic-assisted abrasive polishing of nonferrous AISI316 material
Jae-Seob KWAK
47
Development of micro milling force model and cutting parameter optimization
Shih-ming WANG, Da-fun CHEN, Min-chang JANG, Shambaljamts TSOOJ
48
Thermal deformation of aluminum alloy casting materials for tire mold by numerical analysis
Hee-Sung YOON, Je-Se CHOI, Yool-Kwon OH
49
Experiments and computer simulation analysis of impact behaviors of micro-sized abrasive in waterjet cutting of thin multiple layered materials
Jung-Han LEE, Kang-Su PARK, Myung Chang KANG, Bo Sik KANG, Bo Sung SHIN
50
Reactive wetting phenomena of MgO-C refractories in contact with CaO-SiO2 slag
Seon-Hwa HEO, Kyuyong LEE, Yongsug CHUNG
51
Effect of pulse time on surface characteristics and corrosion resistance during pulse electrochemical polishing
Young-Bin KIM, Jeong-Woo PARK
52
Electrochemical characteristics of Al-Mg and Al-Mg-Si alloy in sea water
Seong-jong KIM, Seung-jun LEE, Jae-yong JEONG, Kyu-hwan KIM
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)