ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 22    No. 2    December 2012

New Forming Technology

1
Optimization of cold forging perform tools using Pseudo Inverse Approach
Ali HALOUANI, Yu-ming LI, ABBES Boussad, Ying-qiao GUO
2
Machine and tool development for forming of polymeric tubular micro-components
Jie ZHAO, Arthur Lan Kuan YIP, Yi QIN, Akhtar RAZALI, Zhi-cong FEI
3
Prediction of texture evolution under varying deformation states through crystal plasticity finite element method
LI Hong-wei, YANG He
4
A new approach to investigate real flow stress in micro-extrusion
LIN Jun-feng, LI Feng, ZHANG Jin-feng
5
Critical blank-holder force in axisymmetric deep drawing
QIN Si-ji, XIONG Bai-qing, LU Hong, ZHANG Ting-ting
6
FE analysis for radial spread behavior in three-roll cross rolling with small-hole and deep-groove ring
QIAN Dong-sheng, HUA Lin, DENG Jia-dong
7
Development of thermal deep drawing system with vacuum environment for difficult-to-deformation materials
MENG Bao, WAN Min, WU Xiang-dong, ZHOU Ying-ke
8
Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy
SHENG Xiang-fei, XIA Qin-xiang, CHENG Xiu-quan, LIN Lie-shu
9
Drawability of thin magnetron sputtered Al-Zr foils in micro deep drawing
Gerrit BEHRENS, Julien KOVAC, Bernd KÖHLER, Frank VOLLERTSEN, Heinz-Rolf STOCK
10
Characterization of plastic behaviour of sheet metals by hydraulic bulge test
Lucian L&#;Z&#;RESCU, Dan-sorin COM&#;A, Ioan NICODIM, Ioan CIOBANU, Dorel BANABIC
11
Mechanics condition of thin-walled tubular component with rib hydroforming
CHU Guan-nan, YANG Shuai, WANG Jian-xun
12
Springback mechanism and compensation of cryogenic Ti alloy tube after numerically controlled bending
ZHAN Mei, ZHAI Hua-dong, YANG He
13
Plastic damage of T-shape hydroforming
TENG Bu-gang, YUAN Shi-jian, CHEN Zeng-tao, JIN Xue-run
14
Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom
LANG Li-hui, WANG Yong-ming, XIE Ya-su, YANG Xi-ying, XU Ying-qiang
15
Welded double sheet hydroforming of complex hollow component
LIU Wei, CHEN Yi-zhe, LIU Gang, CUI Xiao-lei
16
Advanced feature detection algorithms for incrementally formed sheet metal parts
Amar Kumar BEHERA, Bert LAUWERS, Joost R. DUFLOU
17
Ultrasonic thickness measurement for aluminum alloy irregular surface parts based on spectral analysis
CONG Sen, GANG Tie
18
Control strategy of over-bending setting round for pipe-end of large pipes by mould press type method
ZHAO Jun, ZHAN Pei-pei, MA Rui, ZHAI Rui-xue

Forming of New Materials

19
Experimental measurement and theoretical prediction of forming limit curve for aluminum alloy 2B06
LI Xiao-qiang, SONG Nan, GUO Gui-qiang
20
Comparative analysis between stress- and strain-based forming limit diagrams for aluminum alloy sheet 1060
FANG Gang, LIU Qing-jun, LEI Li-ping, ZENG Pan
21
Plastic deformation on hydroforming of aluminum alloy tube with rectangular sections
WANG Xiao-song, YUAN Shi-jian, SONG Peng, XIE Wen-cai
22
Springback law of thin-walled 6061-T4 Al-alloy tube upon bending
LI Heng, SHI Kai-peng, YANG He, TIAN Yu-li
23
Formability and microstructure of AA6061 Al alloy tube for hot metal gas forming at elevated temperature
HE Zhu-bin, FAN Xiao-bo, SHAO Fei, ZHENG Kai-lun, WANG Zhi-biao, YUAN Shi-jian
24
Effect of pre-deformation on microstructure and mechanical properties of 2219 aluminum alloy sheet by thermomechanical treatment
AN Li-hui, CAI Yang, LIU Wei, YUAN Shi-jian, ZHU Shi-qiang, MENG Fan-cheng
25
Effect of internal pressure on corner radius and thickness distribution of shear hydro-bending of 5A02 aluminum alloy tube
WANG Yong, HAN Cong, YUAN Shi-jian
26
Shear hydro-bending of 5A02 aluminum alloys rectangular tubes
HAN Cong, XU Yong-chao, WANG Yong, ZANG Chao, YUAN Shi-jian
27
Deformation behavior of 5A06 aluminum alloy sheet for rapid gas forming at elevated temperature
FAN Xiao-bo, HE Zhu-bin, YUAN Shi-jian
28
Influence of interfacial adhesion strength on formability of AA5052/polyethylene/AA5052 sandwich sheet
LIU Jian-guang, LIU Wei, WANG Jing-xuan
29
Effect of equal channel angular pressing and torsion on SiC-particle distribution of SiCp-Al composites
LI Ping, ZHANG Xiang, XUE Ke-min, LI Xiao
30
Warm hydroforming of magnesium alloy tube with large expansion ratio within non-uniform temperature field
LIU Gang, ZHANG Wen-da, HE Zhu-bin, YUANShi-jian, LIN Zhe
31
Springback characteristics of AZ31 magnesium alloy as-extruded profile in warm tension-rotation bending process
XIAO Han, ZHANG Shi-hong, ZHOU Rong, LU De-hong
32
Microstructure and properties of AZ80 alloy semisolid billets fabricated by new strain induced melt activated method
JIANG Ju-fu, WANG Ying, DU Zhi-ming, LUO Shou-jing
33
Microstructural evolution and mechanical properties of ZK60 magnesium alloy prepared by multi-axial forging during partial remelting
TAO Jian-quan, CHENG Yuan-sheng, HUANG Shao-dong, PENG Fei-fei, YANG Wen-xuan,
LU Mei-qi, ZHANG Zhi-ming, J
34
Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process
WANG Li-ping, JIANG Wen-yong, CHEN Tian, FENG Yi-cheng,
ZHOU Hong-yu, ZHAO Si-cong, LIANG Zhen-qiang, ZHU Yan
35
Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment
SUN Hong-fei, LI Cheng-jie, XIE Yang, FANG Wen-bin
36
Microstructure evolution and mechanical properties of AZ80 alloy reheated from as-cast and deformed states
ZHAO Gao-zhan , YANG Lin , DUAN Xun-xing, REN Xiao-hua, ZHU Li-min,
YANG Ting-jun, GUO Xiang-yong, HAO Shao-
37
Modelization and comparison of Norton-Hoff and Arrhenius constitutive laws to predict hot tensile behavior of Ti-6Al-4V alloy
ZHANG Chao, LI Xiao-qiang, LI Dong-sheng, JIN Chao-hai, XIAO Jun-jie
38
Hot deformation behavior of in-situ TiBw/Ti6Al4V composite with novel network reinforcement distribution
ZHANG Yu-zi, HUANG Lu-jun, LIU Bao-xi, GENG Lin
39
Superplastic forming Ti-6Al-4V titanium alloy cylinder with near uniform thickness distribution
JIANG Shao-song, LU Zhen, HE Xiao-dong, WANG Guo-feng, ZHANG Kai-feng
40
Mechanical properties and formability of TA2 extruded tube for
hot metal gas forming at elevated temperature
HE Zhu-bin, TENG Bu-gang, CHE Chang-yong, WANG Zhi-biao, ZHENG Kai-lun, YUAN Shi-jian
41
Effect of sintering neck on compressive mechanical properties of porous titanium
ZOU Chun-ming, Liu Yan, YANG Xin, WANG Hong-wei, WEI Zun-jie
42
Characterization of TiAl-based alloy with high-content Nb by powder metallurgy
SUN Hong-fei, LI Xue-wen, FENG Jie, FANG Wen-bin
43
Smart hot stamping of ultra-high strength steel parts
Ken-ichiro MORI
44
Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel
Jie LIU, Rudolf KAWALLA
45
Manufacturing of complex high strength components out of high nitrogen steels at industrial level
Hannes NONEDER, Marion MERKLEIN
46
Dynamic recrystallization rules in needle piercing extrusion for
AISI304 stainless steel pipe
GUO Liang-gang, DONG Ke-ke, ZHANG Bao-jun, YANG He, ZHENG Wen-da , LIU Xiong-wei
47
3D numerical analysis of material flow behavior and flash formation of 45# steel in continuous drive friction welding
JI Shu-de, LIU Jian-guang, YUE Yu-mei, LÜ Zan, FU Li
48
Effect of tool temperature and punch speed on hot stamping of ultra high strength steel
LIU Wei, LIU Hong-sheng, XING Zhong-wen, LIU Gang, BAO Jun
49
Hot formation quality of high strength steel BR1500HS for hot stamping without cooling system
LIU Hong-sheng, XING Zhong-wen, LEI Cheng-xi
50
Magnetic pulse joining of aluminum alloy-carbon steel tubes
YU Hai-ping, XU Zhi-dan, JIANG Hong-wei, ZHAO Zhi-xue, LI Chun-feng
51
Cold-pressing deformation characteristics of steel-aluminum sheets joining
LI Feng, LIN Jun-feng, SUI Xiao-chong, BIAN Nan, XU Ming-da
52
Wrinkling behavior of hydro bending of carbon steel/Al-alloy bi-layered tubes
TENG Bu-gang, HU Lan, LIU Gang, YUAN Shi-jian
53
Compressive property and energy absorption characteristic of 3D open-cell Ni-Cr-Fe alloy foams under quasi-static conditions
PANG Qiu, WU Gao-hui, SUN Dong-li, XIUZi-yang, ZHANG Qiang, HUZhi-li
54
Size effect on indentation depth of oxygen-free high purity copper induced by laser shock processing
HU Yong-xiang, LI Kang-mei, QI Chen-jie, YAO Zhen-qiang, Ramana V. GRANDHI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)