ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 22    Sepecial 1    October 2012

结构材料-Structural Materials

1
Nucleation and growth behaviors of primary phase in hypoeutectic Al−Cu alloy in high magnetic field
LI Chuan-jun, REN Zhong-ming, REN Wei-li, WU Yu-qin
2
Microstructure, tensile properties and fractography of A356 alloy under as-cast and T6 obtained with expendable pattern shell casting process
JIANG Wen-ming, FAN Zi-tian, LIU De-jun
3
Influences of aging temperature and time on microstructure and mechanical properties of 6005A aluminum alloy extrusions
DING Xian-fei, SUN Jing, YING Jia, ZHANG Wei-dong, MA Ji-jun, WANG Li-chen
4
Influence of tool parameters on internal voids in cross wedge rolling of aluminum alloy parts
JIA Zhi, ZHOU Jie, JI Jin-jin, YU Ying-yan, XIAO Chuan
5
Validity of three engineering models for fatigue crack growth rate affected by compressive loading in LY12M aluminum alloy
SONG Xin, LI Hong-ping, SHAO Jun-peng, ZHANG Jia-zhen, WANG Ya-hui, YU Xiao-dong
6
Preparation and characterization of SiCp/2024Al composite foams by powder metallurgy
LI Ai-bin, XU Hong-yu, GENG Lin, LI Bin-ling, TAN Zheng-bin, REN Wei
7
FEM modelling for press bend forming of doubly curved integrally stiffened aircraft panel
YAN Yu, WANG Hai-bo, WAN Min
8
Optimization for extrusion process of aluminum controller housing
HU Cheng-liang, MENG Li-fen, ZHAO Zhen, GU Bing, CAI Bing
9
Thickness distribution and mechanical property of sheet metal incremental forming based on numerical simulation
LI Jun-chao, LI Chong, ZHOU Tong-gui
10
Effect of severe plastic deformation on microstructure and mechanical properties of bulk AZ31 magnesium alloy
XU Shu-bo , QIN Zhen, LIU Ting, JING Cai-nian, REN Guo-cheng
11
Solid-state recycling of AZ91D magnesium alloy chips
HU Mao-liang, JI Ze-sheng, CHEN Xiao-yu, WANG Qu-dong, DING Wen-jiang
12
Novel multilayer Mg−Al intermetallic coating for corrosion protection of magnesium alloy by molten salts treatment
HE Mei-feng, HU Wen-bin, ZHAO Su, LIU Lei, WU Ya-ting
13
Effects of rolling deformation on microstructure and mechanical properties of network structured TiBw/Ti composites
HUANG Lu-jun, CUI Xi-ping, GENG Lin, FU Yu
14
Hot deformation behavior of Hastelly C276 superalloy
LU Yan-ling, LIU Jin-xi, LI Xiao-ke, LIANG Jian-ping, LI Zhi-jun, WU Guan-yuan, ZHOU Xing-tai

功能材料-Functional Materials

15
Synthesis of hierarchical hollow spherical CdS nanostructures by microwave hydrothermal process
HU Bao-yun, JING Zhen-zi, HUANG Jian-feng, YUN Jun
16
Controllable synthesis of Zn0.95Co0.05O nanowires and nanotubes by electrophoretic deposition method
LI Jian-jun,, ZHANG Li-ting, ZHU Jin-bo, LIU Yin, HAO Wei-chang
17
Facile synthesis of NiO nanowires and their gas sensing performance
ZENG Wen, MIAO Bin, LIN Li-yang, XIE Jin-yue
18
Stability of nanopore formation in aluminum anodization in oxalic acid
LI Xian-feng, CHEN Dong, CHEN Zhe, WU Yi, WANG Ming-liang,
MA Nai-heng, WANG Hao-wei
19
Sol−gel synthesis of Y2O3-doped ZnO thin films varistors and their electrical properties
XU Dong, JIANG Bin, JIAO Lei, CUI Feng-dan, XU Hong-xing,
YANG Yong-tao, YU Ren-hong, CHEN
20
Influence of substrate bias on microstructure and morphology of ZrN thin films deposited by arc ion plating
ZHANG Min, HU Xiao-gang, YANG Xiao-xu, XU Fei-fei, KIM Kwang-Ho, SHAO Zhi-gang
21
Photocatalytic activities of N doped TiO2 coatings on 316L stainless steel by plasma surface alloying technique
WANG He-feng, SHU Xue-feng, LI Xiu-yan, TANG Bin
22
Microstructure and electrical properties of sol−gel derived Ni-doped CaCu3Ti4O12 ceramics
ZHANG Cheng-hua, ZHANG Ke, XU Hong-xing, SONG Qi, YANG Yong-tao,
YU Ren-hong, XU Dong, ,
23
Structure and piezoelectric properties of (1−x)K0.5Na0.5NbO3−xLiBiO3 lead-free piezoelectric ceramics
JIANG Min-hong, DENG Man-jiao, YANG Zhu-pei, FU Zhen-xiao
24
Fabrication and characteristics of strontium barium niobate/ barium strontium titanate ceramics by powder−sol method
SHAN Lian-wei, WANG Feng-chun, WANG Ji-hua, WU Ze, HAN Zhi-dong, DONG Li-min, ZHANG Xian-you
25
Growth interface of In-doped CdMnTe from Te solution with vertical Bridgman method under ACRT technique
DU Yuan-yuan, JIE Wan-qi, ZHENG Xin, WANG Tao, BAI Xu-xu, YU Hui
26
Determination of trap levels in CZT:In by thermally stimulated current spectroscopy
NAN Rui-hua, JIE Wan-qi, ZHA Gang-qiang, BAI Xu-xu, WANG Bei, YU Hui
27
Effect of Mg and Co co-doping on electrochemical properties of LiFePO4
DING Yan-huai, ZHANG Ping
28
Electrochemical performance of LiVPO4F/C synthesized by different methods
LIU Jie-qun, ZHONG Sheng-kui, WU Ling, WAN Kang, LÜ Fan
29
Preparation and characterization of magnetic Fe3O4/CRGO nanocomposites for enzyme immobilization
WU Xiao-chen, ZHANG Yan, WU Cong-yu, WU Hai-xia
30
Fabrication of hydroxyapatite microspheres with poor crystallinity using a novel flame-drying method
XIAO Gui-yong, LÜ Yu-peng, ZHU Rui-fu, XU Wen-hua, JIAO Yan
31
In vitro corrosion resistance and cytotoxicity of novel TiNbTaZr alloy
GUO Yong-yuan, CHENG Meng-qi, CHEN De-sheng, XUE Xiao-bing, ZHANG Xian-long
32
Development of porous medical implant scaffolds via laser additive manufacturing
SU Xu-bin, YANG Yong-qiang, YU Peng, SUN Jian-feng
33
Manufacturing, compressive behaviour and elastic modulus of Ti matrix syntactic foam fabricated by powder metallurgy
XUE Xiao-bing, WANG Li-qiang, WANG Min-min, LÜ Wei-jie, ZHANG Di
34
Effects of amount of pre-deformation on precipitation of NbC particles and shape memory effect of Fe17Mn5Si8Cr5Ni0.5NbC alloy during electropulsing treatment
LIU Wen-bo, LI Ning, WEN Yu-hua, ZHANG Shi-chao, YANG Shi-zhou
35
Random dynamic response of crack in functionally graded materials layer for plane problem
ZHANG Hui-zhan, ZHAO Xiao-hua, ZHANG Jia-zhen, ZHOU Zhen-gong
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)