ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 22    No. 2    February 2012

Structural Materials

1
Phase equilibria of Mg-rich corner in Mg−Zn−Al ternary system at 300 °C
REN Yu-ping, QIN Gao-wu, PEI Wen-li, LI Song, GUO Yun, ZHAO Hong-da
2
Modeling of strain hardening and dynamic recrystallization of
ZK60 magnesium alloy during hot deformation
HE Yun-bin, PAN Qing-lin, CHEN Qin, ZHANG Zhi-ye, LIU Xiao-yan, LI Wen-bin
3
Low temperature quasi-superplasticity of ZK60 alloy
prepared by reciprocating extrusion
YANG Wen-peng, GUO Xue-feng, YANG Kai-jun
4
Structure stability and mechanical properties of
high-pressure die-cast Mg−Al−Ce−Y-based alloy
ZHANG Jing-huai, LIU Shu-juan, LENGZhe, ZHANG Mi-lin, MENG Jian, WU Rui-zhi
5
Quench sensitivity and microstructure character of high strength AA7050
LI Pei-yue, XIONG Bai-qing, ZHANG Yong-an, LI Zhi-hui, ZHU Bao-hong, WANG Feng, LIU Hong-wei
6
Characterization of cast A356 alloy reinforced with nano SiC composites
Ali MAZAHERY, Mohsen Ostad SHABANI
7
Microstructure and properties of Cu/Al joints brazed with Zn−Al filler metals
JI Feng, XUE Song-bai, LOU Ji-yuan, LOU Yin-bin, WANG Shui-qing
8
Process forces and heat input as function of
process parameters in AA5083 friction stir welds
Rajneesh KUMAR, Kanwer SINGH, Sunil PANDEY
9
Interface characteristic of friction stir welding lap joints of
Ti/Al dissimilar alloys
CHEN Yu-hua, NI Quan, KE Li-ming
10
Effect of Ti−Si−Mg−Al wire on microstructure and
mechanical properties of plasma arc in-situ welded joint of SiCp/Al composites
LEI Yu-cheng, XUE Hou-lu, HU Wen-xiang, YAN Jiu-chun
11
Evaluation of diffusion and phase transformation at
Ag/Al bimetal produced by cold roll welding
Hossein OLIA, Mehrdad ABBASI, Seyed Hossein RAZAVI
12
Effects of P and B addition on as-cast microstructure and
homogenization parameter of Inconel 718 alloy
MIAO Zhu-jun, SHAN Ai-dang, WU Yuan-biao, LU Jun, HU Ying, LIU Jun-liang, SONG Hong-wei
13
Microstructure and shear strength of
reactive brazing joints of TiAl/Ni-based alloy
LI Hai-xin, HE Peng, LIN Tie-song, PAN Feng, FENG Ji-cai, HUANG Yu-dong
14
Bi-modal microstructure in a powder metallurgical ferritic steel
LIU Feng, LIU Yong, WU Hong, FANG Jing-hua, ZHAO Da-peng, ZHANG Liu-jie, LIU Dong-hua

Functional Materials

15
A novel, environmentally friendly and facile method for
oxidative energy storage in nickel hydroxide film electrodes
FANG Wen-bin, LIAN Hui-qin, WANG Jian-ming, XU Lei, ZHANG Li-ying, ZHANG Jian-qing, JU Chun-shan
16
Influence of europium doping on conductivity of LiNiPO4
M. PRABU, S. SELVASEKARAPANDIAN, A. R. KULKARNI, S. KARTHIKEYAN, C. SANJEEVIRAJA
17
Enhanced plasticity of Fe-based bulk metallic glass by tailoring microstructure
 
GUO Sheng-feng, WANG Jing-feng, ZHANG Hong-ju, XIE Sheng-hui
18
Influence of pyrolytic carbon coatings on complex permittivity and
microwave absorbing properties of Al2O3 fiber woven fabrics
DING Dong-hai, ZHOU Wan-cheng, LUO Fa, ZHU Dong-mei
19
Preparation and characterization of composite microspheres of
nano zinc ferrite/poly (D, L-lactide-co-alanine)
CAO Lei-jian, ZHOU Qing-hua,GU Li, SHEN Hong-xia, LI Qing-hua, LAN Ping, FANG Yan
20
Preparation and tribological properties of surface modified Cu nanoparticles
YANG Guang-bin, CHAI Shan-tao, XIONG Xiu-juan, ZHANG Sheng-mao, YU Lai-gui, ZHANG Ping-yu
21
Synthesis and upconversion luminescence of Lu2O3:Yb3+,Tm3+ nanocrystals
LI Li, CAO Xue-qin, ZHANG You, GUO Chang-xin
22
Low-temperature NO2 sensors based on
polythiophene/WO3 organic-inorganic hybrids
GUO Xian-zhi, KANG Yan-fei, YANG Tai-li, WANG Shu-rong

Computational Materials Science and Numerical Mode

23
Structural, magnetic and electronic properties of
FeF2 by first-principle calculation
YANG Zhen-hua, WANG Xian-you, LIU Li, SU Xu-ping
24
Effect of forced lamina flow on microsegregation simulated by
phase field method quantitatively
WANG Jun-wei, WANG Zhi-ping,LU Yang, ZHU Chang-sheng, FENG Li, XIAO Rong-zhen
25
Temperature and stress fields in electron beam welded Ti-15-3 alloy to
304 stainless steel joint with copper interlayer sheet
ZHANG Bing-gang, WANG Ting, DUAN Xiao-hui, CHEN Guo-qing, FENG Ji-cai
26
Effect of configuration on magnetic field in cold crucible using for
continuous melting and directional solidification
CHEN Rui-run, YANG Jie-ren, DING Hong-sheng, HUANG Feng, SU Yan-qing, GUO Jing-jie, FU Heng-zhi
27
Optimization of AZ80 magnesium alloy squeeze cast process parameters
using morphological matrix
GUO Zhi-hong, HOU Hua, ZHAO Yu-hong, QU Shu-wei

Mine Engineering, Metallurgical Engineering, Chemi

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)