ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 21    No. 7    July 2011

Structural Materials

1
Grain refining mechanism of Al-3B master alloy on hypoeutectic Al-Si alloys
LIU Yuan, DING Chao, LI Yan-xiang
2
Dry sliding wear behavior of Al2O3 fiber and SiC particle reinforced aluminium based MMCs fabricated by squeeze casting method
WANG Yi-qi, SONG Jung-il
3
Microstructure of Al-Zn-Mg-Cu-Zr-0.5Er alloy under as-cast and homogenization conditions
WANG Shao-hua, MENG Ling-gang, YANG Shou-jie,
FANG Can-feng, HAO Hai, DAI Sheng-long, ZHANG Xing-guo
4
Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4Mg alloys
S. FARAHANY, A. OURDJINI, M. H. IDRIS, L. T. THAI
5
Influence of Si on stability of TiC in Al melts
. Department of Mechanical Engineering, North China Electric Power University, Baoding , China;
. Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials of Min
6
Mechanical properties and microstructures of Al alloy tensile samples
produced by serpentine channel pouring rheo-diecasting process
CHEN Zheng-zhou, MAO Wei-min, WU Zong-chuang
7
Prediction and optimization of friction welding parameters for
joining aluminium alloy and stainless steel
. Department of Manufacturing Engineering, Annamalai University,
Annamalainagar&#; , Tamil Nadu, India;
. Centre for Materials Joining & Research (CEMAJOR),
8
Microstructure and texture evolution during high-strain-rate superplastic deformation of coarse-grained Mg-Gd-Y-Zr rolled sheet
LI Li, ZHANG Xin-ming
9
Effect of ageing time on corrosion behavior of Mg-10Gd-4.8Y-0.6Zr extruded-alloy
LI Hui-zhong, LIU Hong-ting, GUO Fei-fei, WANG Hai-jun, LIANG Xiao-peng, LIU Chu-ming
10
Welding of Ti-6Al-4V alloy using dynamically controlled plasma
arc welding process
CHEN Jian-chun, PAN Chun-xu
11
Morphology and chemical composition of γ/γ′ phases in
 Re-containing Ni-based single crystal superalloy during two-step aging
WANG Jing, ZHANG Lan-ting, CHEN Ke, SUN Nai-rong, SHAN Ai-dang
12
Influence of temperature on tensile behavior and deformation mechanism of
Re-containing single crystal superalloy
LIU Jin-lai, YU Jin-jiang, JIN Tao, SUN Xiao-feng, GUAN Heng-rong, HU Zhuang-qi
13
Oxidation behaviors of wrought nickel-based superalloys in
various high temperature environments
Changheui JANG, Daejong KIM, Donghoon KIM, Injin SAH, Woo-Seog RYU, Young-sung YOO
14
Microstructure evolution and deformation features of
 single crystal nickel-based superalloy containing 4.2% Re during creep
TIAN Su-gui, LIANG Fu-shun, LI A-nan, LI Jing-jing, QIAN Ben-jiang

Functional Materials

15
Preparation and oxidation property of ZrB2-MoSi2/SiC coating on carbon/carbon composites
ZHANG Wu-zhuang, ZENG Yi, GBOLOGAH Lemuel, XIONG Xiang, HUANG Bai-yun
16
Rapid synthesis of Ti(C, N) powders by mechanical alloying and
subsequent arc discharging
YUAN Quan, ZHENG Yong, YU Hai-zhou
17
Preparation of Al-doped ZnO sputter target by hot pressing
WANG Xing-ming, BAI Xue, DUAN Hua-ying, SHI Zhi-xia, SUN Jing, LU Shi-gang, HUANG Song-tao
18
Rapid synthesis of Mo5Si3-Al2O3 nanocomposite powders by
mechanochemical reduction method
CHEN Hui, MA Qin, SONG Qiu-xiang
19
Preparation of long alumina fibers by sol-gel method using malic acid
TAN Hong-bin, GUO Cong-sheng
20
Synthesis, characterization and gas-sensing properties of
Pd-doped SnO2 nano particles
TAN Rui-qin, GUO Yan-qun, ZHAO Jun-hua, LI Yue, XU Tie-feng, SONG Wei-jie
21
Effect of additives on properties of aluminium titanate ceramics
JIANG Lan, CHEN Xiao-yan, HAN Guo-ming, MENG Yu
22
Influence of Ga and Bi on electrochemical performance of
Al-Zn-Sn sacrificial anodes
HE Jun-guang, WENJiu-ba, LI Xu-dong, WANG Guo-wei, XU Chun-hua
23
Forming method of wick structure for heat column
TAO Su-lian, TANG Yong, PAN Min-qiang, WAN Zhen-ping, LU Long-sheng

Mine Engineering, Metallurgical Engineering, Chemi

Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)