ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 21    Sepecial 1    March 2011
1
Microstructure and properties of alumina-silicon carbide nanocomposites fabricated by pressureless sintering and post hot-isostatic pressing
Young-Keun JEONG, Koichi NIIHARA
2
Formation of interfacial brittle phases sigma phase and IMC in
hybrid titanium-to-stainless steel joint
Min Ku LEE, Jung Gu LEE, Jong Keuk LEE, Sung Mo HONG, Sang Hoon LEE,
Jin Ju PARK, Jae Woo KIM, Chang Kyu RHEE
3
Lubrication properties of silver-palladium alloy prepared by
 ion plating method for high temperature stud bolt
Jung-Dae KWON, Sunghun LEE, Koo-Hyun LEE, Jong-Joo RHA, Kee-Seok NAN, Se-Hun KWON
4
Improvement of hydrogen embrittlement and stress corrosion cracking by
annealing for Al-4.4Mg-0.6Mn alloy
Seong-Jong KIM, Min-Su HAN, Seong-Kweon KIM, Seok-Ki JANG
5
Effect of CaO composition on oxidation and burning behaviors of
 AM50 Mg alloy
Jin-Kyu LEE, Shae K. KIM
6
Characteristic evaluation of Al2O3/CNTs hybrid materials for
micro-electrical discharge machining
Hyun-Seok TAK, Chang-Seung HA, Ho-Jun LEE,
Hyung-Woo LEE, Young-Keun JEONG, Myung-Chang KANG
7
Dispersion of ultrafine SiC particles in molten Al-12Si alloy
Jin-Ju PARK, Sang-Hoon LEE, Min-Ku LEE, Chang-Kyu RHEE
8
Improvement of machining quality of copper-plated roll mold by
controlling temperature variation
Tae-Jin JE, Eun-Chae JEON, Sang-Cheon PARK, Doo-Sun CHOI,
Kyung-Hyun WHANG, Myung-Chang KANG
9
Structural considerations in friction welding of hybrid Al2O3-reinforced aluminum composites
In-Duck PARK, Choon-Tae LEE, Hyun-Soo KIM, Woo-Jin CHOI, Myung-Chang KANG
10
CO2 laser-micro plasma arc hybrid welding for galvanized steel sheets
C. H. KIM, Y. N. AHN, J. H. KIM
11
Fabrication of cast carbon steel with ultrafine TiC particles
Sang-Hoon LEE, Jin-Ju PARK, Sung-Mo HONG, Byoung-Sun HAN, Min-Ku LEE, Chang-Kyu RHEE
12
Effect of aging treatment on irradiation-induced segregation of
high Mn-Cr steel
D. S. BAE, S. P. LEE, Y. R. CHO, H. TAKAHASHI
13
Effects of Cr interlayer on mechanical and
tribological properties of Cr-Al-Si-N nanocomposite coating
Young Su HONG, Se Hun KWON, Tiegang WANG, Doo-In KIM, Jihwan CHOI, Kwang Ho KIM
14
Electrodeposition behavior and characteristics of
Ni-carbon nanotube composite coatings
Sung-Kyu KIM, Tae-Sung OH
15
Formation of nanocrystalline microstructure in arc ion plated CrN films
Qi-min WANG, Se-Hun KWON, Kwang-Ho KIM
16
Effect of carbon on microstructure of CrAlCxN1−x coatings by
hybrid coating system
Sung-Kyu AHN, Se-Hun KWON, Kwang-Ho KIM
17
Effects of honing treatment on AIP-TiN and TiAlN coated end-mill for
high speed machining
Jae-Young HEO, Sung-Hak CHO, Tae-Jin JE, Kwang-Ho KIM, Hyung-Woo LEE, Myung-Chang KANG
18
Hybrid functional IrO2-TiO2 thin film resistor prepared by
atomic layer deposition for thermal inkjet printheads
Won-Sub KWACK, Hyoung-Seok MOON, Seong-Jun JEONG, Qi-min WANG, Se-Hun KWON
19
Thin film processing and multiferroic properties of
Fe-BaTiO3 hybrid composite
Pan YANG, Jin-song ZHU, Jai-Yeoul LEE, Hee Young LEE
20
Properties of multilayer gallium and aluminum doped ZnO(GZO/AZO) transparent thin films deposited by pulsed laser deposition process
Jin-Hyun SHIN, Dong-Kyun SHIN, Hee-Young LEE, Jai-Yeoul LEE
21
Fabrication of curved micro structures on photoresist layer
Jae Sung YOON, Tae-Jin JE, Doo-Sun CHOI, Sung Hwan CHANG, Kyung-Hyun WHANG
22
Effect of coating material and lubricant on forming force and
surface defects in wire drawing process
S. M. BYON, S. J. LEE, D. W. LEE, Y. H. LEE, Y. LEE
23
Experimental and finite element analysis for fracture of coating layer of galvannealed steel sheet
S. I. KIM, J. U. HER, Y. C. JANG, Y. LEE
24
Distribution of electric field for carbon nanotube assembly: Simulation (I)
Soon-Geun KWON, Soo-Hyun KIM, Kwang-Ho KIM, Myung-Chang KANG, Hyung-Woo LEE
25
Distribution of electric field for carbon nanotube assembly: Experiments (II)
Soongeun KWON, Soo-Hyun KIM, Kwang-ho KIM, Myung-chang KANG, Hyung-woo LEE
26
Dielectrophoretic assembly of semiconducting single-walled carbon
 nanotube transistor
Se-Hun KWON, Young-Keun JEONG, Soongeun KWON, Myung-Chang KANG, Hyung-Woo LEE
27
Effect of ammonia gas etching on growth of
vertically aligned carbon nanotubes/nanofibers
Sang-Gook KIM, Sooh-Yung KIM, Hyung-Woo LEE
28
Collapse behavior evaluation of hybrid thin-walled member by
stacking condition
Kil-Sung LEE, Hyeon-Kyeong SEO, Yong-June YANG,
Woo-Chae HWANG, Kwang-Hee IM, In-Young YANG
29
Effect of nanoclay on properties of porous PVdF membranes
Hae-Young HWANG, Deuk-Ju KIM, Hyung-Jun KIM, Young-Taik HONG, Sang-Yong NAM
30
Injection molding of micro patterned PMMA plate
Yeong-Eun YOO, Tae-Hoon KIM, Tae-Jin JE, Doo-Sun CHOI, Chang-Wan KIM, Sun-Kyung KIM
31
Synthesis of crosslinked polystyrene particles by
seeded batch polymerization with monomer absorption
Ki-Chang LEE, Han-Ah WI
32
Comparative analysis on homogeneity of Pb and Cd in
epoxy molding compounds
Kyun-Gmee LEE, Yong-Keun SON, Jin-Sook LEE, Tai-Min NOH, Hee-Soo LEE
33
Optical diffraction gratings embedded in BK-7 glass by
low-density plasma formation using femtosecond laser
Jung-Kyu PARK, Sung-Hak CHO, Kwang-Ho KIM, Myung-Chang KANG
34
Creep and tensile properties of press molding joined GMT-sheets
Jin-Woo KIM, Dong-Gi LEE
35
Reliability of flip-chip bonded RFID die using
anisotropic conductive paste hybrid material
Jun-Sik LEE, Jun-Ki KIM, Mok-Soon KIM, Namhyun KANG, Jong-Hyun LEE
36
27Al MAS-NMR study of inorganic polymer formation at
ambient temperature
Sang-Wook AHN, Hee-Soo LEE, Wan-Hee YANG,Jung-Woo LEE, Young-Keun JEONG
37
Simulation and prediction in laser bending of silicon sheet
WANG Xu-yue, XU Wei-xing, XU Wen-ji, HU Ya-feng, LIANG Yan-de, WANG Lian-ji
38
Experimental investigation of friction coefficient in tube hydroforming
Hyae Kyung YI, Hong Sup YIM, Gun Yeop LEE, Sung Mun LEE, Gi Suk CHUNG, Young-Hoon MOON
39
Optimal design considering structural efficiency of
compressed natural gas fuel storage vessels for automobiles
Myung-Chang KANG, Hyung Woo LEE, Chul KIM
40
Portable nano probe for micro/nano mechanical scratching and measuring
Woo-Park JEONG, Chang-Choi SOO, Cho HYUN, Woo-Lee DEUG
41
Selective removal technology using chemical etching and excimer assistance in precision recycle of color filter
Pai-shan PA
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)