ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 20    Sepecial 3    September 2010

Material Development and Alloy Design

1
X38CrMoV5 hot-work tool steel as tool material for thixoforging of steel: Numerical and experimental evaluation
A. RASSILI, J. C. PIERRET, G. VANEETVELD, J. HALLEUX, G. WALMAG, J. LECOMTE-BECKERS
2
Application of semisolid process to Zr-based metallic glass matrix composites
T. Tamura, A. Makaya, K. Miwa
3
Commercial AM60 alloy for semisolid processing:
 Effects of continuous rheoconversion process on microstructure
XING Bo (邢 博), LI Yuan-dong (李元东), MA Ying (马 颖),HAO Yuan (郝 远), D.APELIAN
4
Fabrication of AZ31 alloy wire by continuous semisolid extrusion process
GUAN Ren-guo(管仁国), ZHAO Zhan-yong(赵占勇), SUN Xiao-ping(孙小平),
HUANG Hong-qian(黄红乾), DAI Chun-guang(戴春光), ZHANG Qiu-sheng(张秋生)

Microstructure and Properties

5
In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state
S. TERZI,L. SALVO, M. SUERY, A. DAHLE, E. BOLLER
6
Microstructure evolution and thixoextrusion of
AZ91D magnesium alloy produced by SSTT
CHENG Yuan-sheng(程远胜), CHEN Qiang(陈 强), HUANG Zhe-qun(黄哲群), HUANG Shu-hai(黄树海)
7
Microstructure of semi-solid ADC12 aluminum alloy adopting
new SIMA method
WANG Zhen-yu(王振宇), JI Ze-sheng(吉泽升), SUN Li-xin(孙丽鑫), XU Hong-yu(许红雨)
8
Microstructure of AZ91D magnesium alloy semi-solid billets prepared by SIMA method from chips
XU Hong-yu(许红雨), JI Ze-sheng(吉泽升), HU Mao-liang(胡茂良), WANG Zhen-yu(王振宇)
9
Microstructure and mechanical properties of rheo-diecasted A390 alloy
ZHAO Jun-wen(赵君文), WU Shu-sen (吴树森)
10
Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy
Lü Shu-lin(吕书林), WU Shu-sen (吴树森), ZHU Ze-ming(朱泽明), AN Ping(安 萍),
MAO You-wu(毛有武)
11
Microstructure and properties of rheo-diecast Al-20Si-2Cu-1Ni-0.4Mg alloy with direct ultrasonic vibration process
WU Shu-sen (吴树森), ZHONG Gu (钟 鼓), WAN Li (万里), AN Ping (安 萍), MAO You-wu(毛有武)
12
Microstructural evolution of Mg9AlZnY alloy with vibration in
lost foam casting during semi-solid isothermal heat treatment
ZHAO Zhong(赵 忠), FAN Zi-tian(樊自田), JIANG Wen-ming(蒋文明), DONG Xuan-pu(董选普)
13
Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring
P. Gerald Tennyson, P. Kumar, H. Lakshmi, G. Phanikumar, P. Dutta
14
Microstructural characteristics of thixoforged A356 alloy in mushy state
S. TAHAMTAN, A. FADAVI BOOSTANI
15
Synthesis and characterization of 356-SiCp composites by
stir casting and compocasting methods
S. AMIRKHANLOU, B. NIROUMAND
16
Design of experiments for determination of influence of different
parameters on mechanical properties of semi-solid extruded parts
V. POUVAFAR, S. A. SADOUGH, F. HOSSEINJ, M. R. RAHMANI
17
Mechanical properties of thixo-formed austempered ductile iron
B. HEIDARIAN, M. NLILI-AHMADABADI, M. MORADI
18
Characterization on morphology evolution of primary phase in semisolid A356 under slightly electromagnetic stirring
LIU Zheng (刘  政), MAO Wei-min (毛卫民), LIU Xiao-mei (刘小梅)
19
Thixotropic compression deformation behavior of SiCp/AZ61 magnesium matrix composites
YAN Hong (闫 洪), WANG Jian-jin(王建金)
20
Microstructure evolution behavior of AlSi9Cu3 alloy during rheocasting
GUO Hong-min(郭洪民), LIU Xu-bo(刘旭波), YANG Xiang-jie(杨湘杰), ZHANG Ai-sheng(章爱生), LIU Yong(刘勇)
21
In-situ observation of crystal detachment behavior in NH4Cl-H2O system  from chilling metal surface with vibration
ZHANG Ying(张 莹), WANG Meng(王 猛), DU Li-cheng(杜立成), LIN Xin(林 鑫), HUANG Wei-dong(黄卫东)
22
Morphological evolution of non-dendritic microstructure during
solidification under stirring
LIN Xin(林 鑫), TONG Lei-lei(统雷雷), ZHAO Li-ning(赵力宁),
WANG Li-lin(王理林), WANG Meng(王 猛), HUANG Wei-dong(黄卫东)
23
Semi-solid rheocasting of grain refined aluminum alloy 7075
U. A. CURLE, G. GOVENDER
24
Influence of surface liquid segregation on corrosion behavior of semi‑solid metal high pressure die cast aluminium alloys
E. P. MASUKU , H. MÖLLER, U. A. CURLE, P. C. PISTORIUS, W. LI
25
Influence of elevated Fe, Ni and Cr levels on tensile properties of
SSM-HPDC Al-Si-Mg alloy F357
H. MöLLER, W. E. STUMPF, P. C. PISTORIUS
26
Characterization of surface liquid segregation in SSM-HPDC aluminium alloys 7075, 2024, 6082 and A201
H. MöLLER, U. A. CURLE , E. P. MASUKU
27
Wear of semi-solid rheocast SiCp/Al metal matrix composites
U. A. CURLE, L. IVANCHEV
28
Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process
R. BURAPA, S. JANUDOM, T. CHUCHEEP, R. CANYOOK, J. WANNASIN
29
Microstructure and mechanical properties of rheo-diecasting AZ91D Mg alloy
YANG Liu-qing(杨柳青), KANG Yong-lin(康永林), ZHANG Fan(张 帆), XU Jun(徐 骏)

Rheology, Modelling and Simulation

30
Effect of high shear rate on solidification microstructure of
semisolid AZ91D alloy
ZHU Guang-lei (朱光磊), XU Jun (徐 骏), ZHANG Zhi-feng (张志峰), LIU Guo-jun(刘国钧),Z. Fan
31
Effects of annular electromagnetic stirring processing parameters on
semi-solid slurry production
CHEN Xing-run(陈兴润), ZHANG Zhi-feng(张志峰), XU Jun(徐 骏)
32
Prediction of shear-related defect locations in semi-solid casting using numerical flow models
F. PINEAU, G. D’AMOURS
33
Rheological behavior of semi-solid Mg2Si/AM60
magnesium matrix composites at steady state
HU Yong(胡 勇), HE Bo-lin(何柏林), YAN Hong(闫洪)
34
Numerical simulation and experiment validation of thixoforming angle frame of AZ61 magnesium alloy
JIANG Ju-fu (姜巨福), WANG Ying (王 迎), QU Jian-jun (曲建俊),
DU Zhi-ming (杜之明), LUO Shou-jing (罗守靖)
35
Investigation of semi-solid aluminum alloy filling-plastic
flowing in thixoforging
DU Zhi-ming (杜之明), LIU Jun (柳 君), CHEN Gang(陈 刚), QIN Jin (秦晋), XIE Shui-sheng (谢水生)
36
Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope
N. K. KUND, P. DUTTA
37
Rheological behavior, microstructure and hardness of A356 aluminum alloy in semisolid state using backward extrusion process
S. A. SADOUGH, M. R. RAHMANI, V. POUYAFAR
38
Treatment of discontinuous interface in liquid-solid forming with extended finite element method
ZHOU Ji-ming(周计明), QI Le-hua(齐乐华)
39
Characterization of thixoforming process of 100Cr6 steel
K. P. SO&#;EK , A. RASSILI , J. C. PIERRET , G. VANEETVELD
40
Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D
WANG Kai-kun(王开坤), SUN Jian-lin (孙建林), MENG Hai-feng (孟海峰),
DU Yan-mei (杜艳梅), WANG Xi (王晰)
41
Numerical simulation of a thixocasting process for AISI420 stainless steel air-turbine blade
DAO Van-luu(陶文琉), ZHAO Sheng-dun(赵升吨), ZHANG Qi(张  琦)
42
Simulation of semisolid diecasting process of
four-way valve of HPb59-1 alloy for air-conditioner
YAN Guan-hai(闫观海), ZHAO Sheng-dun(赵升吨), SHA Zheng-hui(沙郑辉)

Process Development

43
Stability of steel thixoforming process
J. C. PIERRET, A. RASSILI, G. VANEETVELD, J. LE, COMTE-BECKERS
44
Electro-pulse modification and reheating process for production of thixotropic microstructure in AlSi7Mg alloy
TIAN Wen-tong(田文彤), ZHANG Guang-an(张广安)
45
Suitability of lost cores in rheocasting process
H. Michels, M. Bünck, A. Bührig-Polaczek
46
Metal flow and die wear in semi-solid forging of steel using coated dies
L. KHIZHNYAKOVA, M. EWERING, G. HIRT, K. BOBZIN, N. BAGCIVAN
47
Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component
H. LAKSHMI, M. C. VINAY KUMAR, RAGHUNATH, P. KUMAR, V. RAMANARAYANAN,
K. S. S. MURTHY, P. DUTTA
48
Effects of casting factors of cooling slope on semisolid condition
T. HAGA, R. NAKAMURA, R. TAGO, H. WATARI
49
Reverse design of microstructure and application effectiveness for semi-solid processing of aluminum alloy
YANG Yi-tao(杨弋涛), YIN Xiang-lin(尹湘林), SUN Bao-liang(孙保良), ZHANG Heng-hua(张恒华),
JIN Xiao-chun(金晓春), SHAO Guang-jie(邵
50
Semi-solid gravity sand casting using gas induced semi-solid process
T. CHUCHEEP, R. BURAPA, S. JANUDOM, S. WISUTMETHANGOON, J. WANNASIN
51
Preparation of SiCp/A356 electronic packaging materials and its thixo-forging
WANG Kai-kun(王开坤), KANG Yong-lin(康永林), SONG Pu-guang(宋普光),
XU Feng(徐  峰), LI Xian-hui(黎先辉)

Industrial Applications & Others

52
Modified rheological processing technology and its applications in iron and steels
XING Shu-ming(邢书明), BAO Pei-wei(鲍培玮), LI Nan(李  楠), YAO Shu-qing(姚淑卿)
53
Thixocasting combination spanners using stainless steel X39CrMo17
M. BÜNCK, E. SUBASIC, A. BÜHRIG-POLACZEK, K. JIANG, S. MÜNSTERMANN, J. M. SCHNEIDER, K. FICKERT, H. J
54
Thixoextrusion of A357 aluminium alloy
A. FORN, G. VANEETVELD, J. C. PIERRET, S. MENARGUES,
M. T. BAILE, M. CAMPILLO, A. RASSILI
55
Research and development of gas induced semi-solid process for industrial applications
J. WANNASIN, S. JANUDOM, T. RATTANOCHAIKUL, R. CANYOOK,
R. BURAPA, T. CHUCHEEP, S. THANABUMRUNGKUL
56
Industrial development of gas induced semi-solid process
S. THANABUMRUNGKUL, S. JANUDOM, R. BURAPA, P. DULYAPRAPHANT, J. WANNASIN
57
AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming
Y. BIROL, D. ISLER
58
SiC nanoparticles reinforced magnesium matrix composites fabricated by
 ultrasonic method
WANG Zhao-hui(王朝辉), WANG Xu-dong(王旭东), ZHAO Yu-xin(赵宇昕), DU Wen-bo(杜文博)
59
Characteristics of 100Cr6 bearing steel after thixoforming process performed   with prototype device
&#;. ROGAL, J. DUTKIEWICZ, T. CZEPPE , J. BONARSKI, B. OLSZOWSKA-SOBIERAJ
60
Structure of miniature components from steel produced by
forming in semi-solid state
b. Masek, D. Aisman, M. Behulova, H. Jirkova
61
Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components
Q. ZHU, S. P. MIDSON
62
A review on steel thixoforming
A. RASSILI, H. V. ATKINSON
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)