ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 20    No. 9    September 2010

Material Development and Alloy Design

1
Effect of Si, Cu and Fe on mechanical properties of
cast semi-solid 206 alloys
A. LEMIEUX, J. LANGLAIS, D. BOUCHARD, X. GRANT CHEN
2
Compocasting of A356-CNT composite
B. ABBASIPOUR, B. NIROUMAND, S. M. MONIR VAGHEFI
3
Recycling of minute metal scraps by semisolid processing:
Manufacturing of design materials
S. SUGIYAMA, T. MERA, J. YANAGIMOTO
4
Commercial AM60 alloy for semisolid processing:
Alloy optimization and thermodynamic analysis
LI Yuan-dong(李元东), D. APELIAN, XING Bo(邢 博), MA Ying(马 颖), HAO Yuan(郝 远)

Microstructure and Properties

5
Observation of interface of two kinds of bi-metal composite parts prepared by thixo-forging
YANG Zhao(杨 昭) , ZHOU Li(周 丽), DONG Jian-xiong(董建雄)
6
Microstructure evolution during reheating of
extruded Mg-Gd-Y-Zr alloy into semisolid state
GAO Lei(高 磊), LIANG Song-mao(梁松茂), CHEN Rong-shi(陈荣石), HAN En-hou(韩恩厚)
7
New method of direct chill casting of Al-6Si-3Cu-Mg semisolid billet by annulus electromagnetic stirring
TANG Meng-ou(汤孟欧), XU Jun(徐 骏), ZHANG Zhi-feng(张志峰), BAI Yue-long(白月龙)
8
Tensile properties of as-deformed 2A50 aluminum alloy in semi-solid state
DU Zhi-ming(杜之明), CHEN Gang(陈 刚), LIU Jun(柳 君), XIE Shui-sheng(谢水生)
9
Microstructure and properties of high silicon aluminum alloy with 2% Fe prepared by rheo-casting
ZHONG Gu(钟 鼓), WU Shu-sen(吴树森), AN Ping(安 萍), MAO You-wu(毛有武), LI Shi-zhao(李世钊)
10
Microstructure and mechanical properties of A356 thixoformed alloys in
comparison with gravity cast ones using new criterion
A. FADAVI BOOSTANI, S. TAHAMTAN
11
Microstructural evolution during partial remelting of AM60B magnesium alloy refined by MgCO3
CHEN Ti-jun(陈体军), MA Ying(马 颖), WANG Rui-quan(王瑞全), LI Yuan-dong(李元东), HAO Yuan(郝 远)
12
Microstructure of partially remelted billet of AM60 alloy prepared with self-inoculation method
XING Bo(邢 博), LI Yuan-dong(李元东), MA Ying(马 颖),
CHEN Ti-jun(陈体军), HAO Yuan(郝 远)
13
Microstructure and tensile properties of AM50A magnesium alloy
prepared by recrystallisation and partial melting process
ZHAO Zu-de(赵祖德), CHEN Qiang(陈 强), HUANG Shu-hai(黄树海),
KANG Feng(康 凤), WANG Yan-bin(王艳彬)
14
Rheological characterization of A201 aluminum alloy
A. BLANCO, Z. AZPILGAIN, J. LOZARES, P. KAPRANOS, I. HURTADO
15
Effect of sodium modification on microstructure and mechanical properties of thick-walled AlSi6Cu2.5 rheocast component
M. WESSÉN, N. E. ANDERSSON, O. GRANATH
16
Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy
R. CANYOOK, S. PETSUT, S. WISUTMETHANGOON, M. C. FLEMINGS, J. WANNASIN
17
Inconel 617 and Stellite 6 alloys for tooling in thixoforming of steels
Y. BIROL
18
Microstructural evolution during semisolid state strain induced melt activation process of aluminum 7075 alloy
A. BOLOURI, M. SHAHMIRI, E. N. H. CHESHMEH
19
Coarsening rate of microstructure in semi-solid aluminium alloys
H. V. ATKINSON, D. LIU
20
Taper barrel rheomoulding process for semi-solid slurry preparation and microstructure evolution of A356 aluminum alloy
ZHANG Fan(张 帆), KANG Yong-lin(康永林), YANG Liu-qing(杨柳青), DING Rui-hua(丁瑞华)
21
Microstructure refinement of AZ31 alloy solidified with pulsed magnetic field
WANG Bin(汪 彬), YANG Yuan-sheng(杨院生), SUN Ming-li(孙明礼)

Rheology, Modelling and Simulation

Process Development

26
Conception of tooling adapted to thixoforging of
high solid fraction hot-crack-sensitive aluminium alloys
G. VANEETVELD, A. RASSILI, J. C. PIERRET, J. LECOMTE-BECKERS
27
Semi-solid near-net shape rheocasting of
heat treatable wrought aluminum alloys
U. A. CURLE
28
Deformation mechanism and forming properties of 6061Al alloys during
compression in semi-solid state
SHANG Shu-zhen(尚淑珍), LU Gui-min(路贵民), TANG Xiao-ling(唐小玲),
ZHAO Zu-xin(赵祖欣), WU Cheng-ming(吴成明)
29
Preparation and thixoforging of semisolid billet of AZ80 magnesium alloy
JIANG Ju-fu(姜巨福), WANG Ying(王 迎), QU Jian-jun(曲建俊),
DU Zhi-ming(杜之明), LUO Shou-jing(罗守靖)
30
Damage prediction for magnesium matrix composites formed by
liquid-solid extrusion process based on finite element simulation
QI Le-hua(齐乐华), LIU Jian(刘 健), GUAN Jun-tao(关俊涛),
SU Li-zheng(苏力争), ZHOU Ji-ming(周计明)
31
Semi-solid processing of hypereutectic A390 alloys using
novel rheoforming process
M. TEBIB, J. B. MORIN, F. AJERSCH, X. GRANT CHEN
32
Shear band formation in shaped rheocast aluminium component at
various plunger velocities
M. BLADH, M. WESSÉN, A. K. DAHLE
33
Feasibility of semi-solid die casting of ADC12 aluminum alloy
S. JANUDOM, T. RATTANOCHAIKUL, R. BURAPA, S. WISUTMETHANGOON, J. WANNASIN
34
Development of aluminum rheo-extrusion process using
semi-solid slurry at low solid fraction
T. RATTANOCHAIKUL, S. JANUDOM, N. MEMONGKOL, J. WANNASIN
35
Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry
MAO Wei-min(毛卫民), ZHENG Qiu(郑 秋), ZHU Da-ping(朱达平)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)