ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 10    No. 4    August 2000
1
Phase transformation of fully lamellar γ-TiAl alloys inα+γfield①
CAO Guo-xin(曹国鑫), LIN Jian-guo(林建国),
ZHANG Yong-gang(张永刚), CHEN Chang-qi(陈昌麒)
2
Isothermal solidification behavior of typical
Ni3Al base superalloy IC6①
WANG Xiao-ping(汪小平), ZHENG Yun-rong(郑运荣), XIAO Cheng-bo(肖程波),
WANG Bei-lei(王蓓蕾), HAN Ya-fang(韩雅芳)
3
Mechanical properties of rapidly solidified Al-Ti alloys
after thermal exposure①
WU Jin-ming(吴进明), ZHENG Shi-lie(郑史烈), YUAN Jun(袁 俊),
LI Zhi-zhang(李志章), ZENG Yue-wu(曾跃武), JI Zhen-guo(季振国)
4
Mechanical properties of hypereutectic Al-Si alloy by semisolid processing①
LI Shu-suo(李树索),, ZHAO Ai-min(赵爱民), MAO Wei-min(毛卫民), ZHONG Xue-you(钟雪友)
5
Effect of electric current on stability of solidification interface morphology①
CHANG Guo-wei(常国威),, YUAN Jun-ping(袁军平), WANG Zi-dong(王自东),
WU Chun-jing(吴春京), WANG Xin-hua(王新华), HU Han-qi(胡汉起)
6
Simulation and control model for interactions among process parameters of directional solidification continuous casting①
PENG Li-ming(彭立明), MAO Xie-min(毛协民), XU Kuang-di(徐匡迪)
7
Densification abnormality in reactive hot pressing of  Ti and Al elemental powders①
LIU Yong(刘 咏), HUANG Bai-yun(黄伯云), HE Yue-hui(贺跃辉), ZHOU Ke-chao(周科朝)
8
Morphology and growth mechanism of borides in Ti-48Al+B alloys①
LI Zhen-xi(李臻熙), CAO Chun-xiao(曹春晓)
9
Preparation of heat-resistant aluminum alloy pipe blanks by
multi-layer spray deposition①
YUAN Wu-hua(袁武华), CHEN Zhen-hua(陈振华),HUANG Pei-yun(黄培云)
10
Simulation and prediction of microstructure in hot forming of metals①
CHEN Hui-qin(陈慧琴), ZHANG Qiao-li(张巧丽), LIU Jian-sheng(刘建生), GUO Hui-guang(郭会光)
11
Tensile and creep properties of Mg-9Al based alloys containing bismuth①
YUAN Guang-yin(袁广银), SUN Yang-shan(孙扬善), ZHANG Wei-min(张为民), SUN Jian-rong(孙建荣)
12
Development of wax-oil-polyethylene binder for
Fe-2Ni powder injection molding①
LI Song-lin(李松林), HUANG Bai-yun(黄伯云), LI Yi-min(李益民), QU Xuan-hui(曲选辉)
13
Laser surface coating of RE bioceramic layer on TC4①
GAO Jia-cheng(高家诚), ZHANG Ya-ping(张亚平),
WEN Jing(文 静), WANG Yong(王 勇)
14
Undercooling heredity of Cu70Ni30melt solidified in
non-catalytic nucleation coated mould①
GUO Xue-feng(郭学锋),, LIU Yong-chang(刘勇长),
YANG Gen-cang(杨根仓), XING Jian-dong(邢建东)
15
Effects of Ti and(or) Cu on microstructures and
magnetic properties of sintered Nd-Fe-B magnets①
SONG Xiao-ping(宋晓平), YANG Sen(杨 森), WANG Xian-hui(王献辉), SUN Zhan-bo(孙占波)
16
Pulsed DC plasma enhanced chemical vapor deposited
TiN/Ti(C,N) multilayer coatings①
MA Sheng-li(马胜利), LI Yan-huai(李雁淮), NAN Jun-ma(南俊马), XU Ke-wei(徐可为)
17
Tribological behavior of different films
on Ti-6Al-4V alloy prepared by plasma-based ion implantation①
JI Hong-bing(季红兵), XIA Li-fang(夏立芳), MA Xin-xin(马欣新), SUN Yue(孙 跃)
18
Tribological stability of particle reinforced
aluminum matrix composites in braking①
WU Jun-hua(吴军华), ZHANG Guo-ding(张国定), WANG Wen-long(王文龙)
19
Emission spectra of microwave plasma and
MPCVD transparent diamond film①
ZHOU Jian(周 健), HE Wei(何 伟), YUAN Run-zhang(袁润章),
JIANG De-sheng(姜德生), WANG Jian-hua(汪建华)
20
Hot pressing of hydroxyapatite(HA)-Ti
material and stability of HA①
CHU Cheng-lin(储成林), ZHU Jing-chuan(朱景川), YIN Zhong-da(尹钟大),
LI Ming-wei(李明伟), WANG Shi-dong(王世栋), XING Shu-zhong(邢树忠)
21
Degradation characteristics of
Ti/(IrO2+Ta2O5) coating anodes in H2SO4solution①
HU Ji-ming(胡吉明), WU Ji-xun(吴继勋), MENG Hui-min(孟惠民),
SUN Dong-bai(孙冬柏), ZHU Yan-rong(朱艳冗), YANG De-jun(杨德钧)
22
Preparation and mechanical properties of Si2N2O ceramics①
WANG Si-qing(王思青), YAN Yu-hua(阎玉华)
23
Separating titania from treated slag by gravity separation or flotation①
MA Jun-wei(马俊伟),, SUI Zhi-tong(隋智通), CHEN Bing-chen(陈炳辰)
24
Electric arc furnace dust non-isothermal reduction kinetics①
ZHANG Chuan-fu(张传福), PENG Bing(彭 兵), PENG Ji(彭 及),
J. Lobel, A. K. Janusz
25
Leaching kinetics of rare earth from black weathering mud
with hydrochloric acid①
CHI Ru-an(池汝安), ZHU Guo-cai(朱国才), TIAN Jun(田 君)
26
Electrochemical reaction mechanism of aqueous polysulfide solution①
YI Qing-feng(易清风), CHEN Qi-yuan(陈启元),
ZHOU Ji-hong(周继红), ZHANG Ping-min(张平民)
27
Effects of addition of rare earth on properties and
structures of Ni-W-B-SiC composite coatings①
GUO Zhong-cheng(郭忠诚), ZHAI Da-cheng(翟大成), YANG Xian-wan(杨显万)
28
Hydrothermal fluid circulation in
anisotropic permeable media associated with discrete fractures①
YANG Jian-wen(杨建文)
29
Experiment and mechanism of
dynamic drag reduction in pipeline transportation①
WU Ai-xiang(吴爱祥), GU De-sheng(古德生), HU Hua(胡 华)
30
Non-derivative solution to nonlinear dynamic optimal design of
class two for deformation network monitoring①
TAO Hua-xue(陶华学), GUO Jin-yun(郭金运)
31
Expert control strategy using neural networks for
electrolytic zinc process①
WU Min(吴 敏), TANG Zhao-hui(唐朝晖), GUI Wei-hua(桂卫华)
32
Intelligent modeling and optimization on time-sharing power
dispatching system for electrolytic zinc process①
WANG Ya-lin(王雅琳), GUI Wei-hua(桂卫华),
YANG Chun-hua(阳春华), HUANG Tai-song(黄泰松)
33
Hydraulic impactor with impact energy and frequency
adjusted independently and steplessly①
ZHU Jian-xin(朱建新), ZHAO Hong-qiang(赵宏强), GUO Yong(郭 勇), HE Qing-hua(何清华)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)