ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 20    No. 3    March 2010

Structural Materials

1
Effects of whisker surface treatment on microstructure and properties of Al18B4O33w/6061Al composites
GENG Lin(耿 林), GUAN Li-na(关丽娜), LÜ Kui-ming(吕奎明)
2
Effects of rheoforming on microstructures and mechanical properties of 7075 wrought aluminum alloy
GUO Hong-min(郭洪民), YANG Xiang-jie(杨湘杰), WANG Jia-xuan(王家宣),
HU Bin(胡 斌), ZHU Guang-lei(朱光磊)
3
Characteristics of two Al based functionally gradient
composites reinforced by primary Si particles and Si/
in situ Mg2Si particles in centrifugal casting
ZHAI Yan-bo(翟彦博), LIU Chang-ming(刘昌明), WANG Kai(王 开), ZOU Mao-hua(邹茂华), XIE Yong(谢 勇)
4
Friction and wear of 7075 aluminum alloy induced by torsional fretting
CAI Zhen-bing(蔡振兵), ZHU Min-hao(朱旻昊), LIN Xiu-zhou(林修洲)
5
Effect of Sb on microstructure and mechanical properties in
Mg-10Zn-5Al high zinc magnesium alloys
ZHANG Jin-shan(张金山), ZHANG Zhao-guang(张照光), ZHANG Yu-hua(张玉华),
LI Shan-hu(李山虎), LIU Ya-li(刘雅丽)
6
Microstructure and mechanical properties of Mg-6Al-0.3Mn-xY alloys prepared by casting and hot rolling
SU Gui-hua(苏桂花), ZHANG Liang(张 亮), CHENG Li-ren(程丽任),
LIU Yong-bing(刘勇兵), CAO Zhan-yi(曹占义)
7
Preparation of porous Ti35Nb alloy and its mechanical properties under monotonic and cyclic loading
LIN Jian-guo(林建国), ZHANG Yun-fei(张云飞), MA Mo(马 蓦)
8
Manufacturing techniques of armor strips excavated from
Emperor Qin Shi Huang’s mausoleum, China
LIAO Ling-min(廖灵敏), PAN Chun-xu(潘春旭), MA Yu(马 宇)
9
Forming mechanism of integral serrated high fins by
plowing-extruding based on variational feed
WAN Zhen-ping(万珍平), YAN Hui(燕 辉), TANG Yong(汤 勇)

Functional Materials

10
Hydrogen storage behaviours of nanocrystalline and amorphous
Mg20Ni10−xCox (x=0−4) alloys prepared by melt spinning
ZHANG Yang-huan(张羊换), ZHAO Dong-liang(赵栋梁), LI Bao-wei(李保卫),
QI Yan(祁 焱), GUO Shi-hai(郭世海), WANG Xin-lin(王新林)
11
Creep behavior of SnAgCu solders with rare earth Ce doping
ZHANG Liang(张 亮), XUE Song-bai(薛松柏), GAO Li-li(皋利利), ZENG Guang(曾 广),
CHEN Yan(陈 燕), YU Sheng-lin(禹胜林),
12
Ultrasonic characterization of modified Cr2O3 coatings by
reflection coefficient spectroscopy
LI Ji-cheng(李继承), LIN Li (林 莉),LI Xi-meng(李喜孟), LI Guang(李 光), LEI Ming-kai(雷明凯)
13
Effect of surface nanocrystallization and PPEC time on
complex nanocrystalline hard layer fabricated by plasma electrolysis
M. ALIOFKHAZRAEI, SH. AHANGARANI, A. SABOUR ROUHAGHDAM
14
Sol-gel synthesis and photoluminescence of LaPO4׃Eu3+ nanorods
GAO Rui(高 锐), QIAN Dong(钱 东), LI Wei(李 卫)
15
Catalytic performance and kinetics of Au/γ-Al2O3 catalysts for
low-temperature combustion of light alcohols
DENG Qian(邓 谦), LI Xiao-mei(李小梅), PENG Zhen-shan(彭振山),
LONG Yun-fei(龙云飞), XIANG Long-ming(相龙明), CAI Tie-jun(蔡铁军)<
16
Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering
LI Xiao-qiang(李小强), XIN Hong-wei(辛红伟), HU Ke(胡 可), LI Yuan-yuan(李元元)

Computational Materials Science and Numerical Modelling

17
Thermodynamic assessment of Mg-Ga binary system
MENG Fan-gui(孟凡桂), WANG Jiang(王 江), RONG Mao-hua(戎茂华),
LIU Li-bin(刘立斌), JIN Zhan-peng(金展鹏)
18
Identification of nucleation parameter for cellular automaton model of
dynamic recrystallization
JIN Zhao-yang(金朝阳), LIU Juan(刘 娟), CUI Zhen-shan(崔振山), WEI Dong-lai(韦东来)
19
Differences of grain-refining effect of Sc and Ti additions in aluminum by empirical electron theory analysis
YE Yi-cong(叶益聪), HE Liang-ju(何良菊), LI Pei-jie(李培杰)
20
Application of new VBHF optimization strategy to improve formability of automobile panels with aluminum alloy sheet
WANG Wu-rong(王武荣), CHEN Guan-long(陈关龙), LIN Zhong-qin(林忠钦)
21
Numerical and physical simulation of new SPD method combining extrusion and equal channel angular pressing for AZ31 magnesium alloy
ZHANG Ding-fei(张丁非), HU Hong-jun(胡红军), PAN Fu-sheng(潘复生),
YANG Ming-bo(杨明波), ZHANG Jun-ping(张钧萍)
22
Cross-sectional distortion behaviors of thin-walled rectangular tube in
rotary-draw bending process
ZHAO Gang-yao(赵刚要), LIU Yu-li(刘郁丽), YANG He(杨 合), LU Cai-hong(卢彩红)
23
Effect of nonlinear liquidus and solidus on dendrite growth in
bulk undercooled melts
CHEN Zheng(陈 正), WANG Hai-feng(王海丰), LIU Feng(刘 峰), YANG Wei(杨 伟)

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

24
Flotation techniques for separation of diaspore from bauxite using
Gemini collector and starch depressant
XIA Liu-yin(夏柳荫), ZHONG Hong(钟 宏), LIU Guang-yi(刘广义)
25
Effect of vacancy defects on electronic properties and activation of sphalerite (110) surface by first-principles
CHEN Jian-hua(陈建华), CHEN Ye(陈 晔), LI Yu-qiong(李玉琼)
26
Isolation, characterization and extraction of mer gene of Hg2+ resisting strain D2
ZENG Xiao-xi(曾晓希), TAGN Jian-xin(汤建新), JIANG Pei(蒋 佩),
LIU Hong-wei(刘宏伟), DAI Zhi-min(戴志敏), LIU Xue-duan(刘学端)
27
Application of ionic liquids in hydrometallurgy of nonferrous metals
TIAN Guo-cai(田国才), LI Jian(李 坚), HUA Yi-xin(华一新)
28
Adjustment on gibbsite and boehmite co-precipitation from
supersaturated sodium aluminate solutions
WANG Zhi(王 志), YANG Liu(杨 柳), ZHANG Juan(张 娟),
GUO Zhan-cheng(郭占成), ZHANG Yi(张 懿)
29
Periodical attenuation of Al(OH)3 particles from seed precipitation in
seeded sodium aluminate solution
WU Yu-sheng(吴玉胜), ZHANG Di(张 迪), LI Ming-chun(李明春),
BI Shi-wen(毕诗文), YANG Yi-hong(杨毅宏)
30
Selective separation of copper and cadmium from zinc solutions by
low current density electrolysis
YANG Bo(杨 卜), WANG Cheng-yan(王成彦), LI Dun-fang(李敦钫),
YIN Fei(尹 飞), CHEN Yong-qiang(陈永强), WANG Nian-wei(王念卫)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)