ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 19    Sepecial 2    September 2009
1
Deformation behavior of fine-grained 5083 Al alloy at elevated temperature
ZHANG Kai-feng(张凯锋), YAN Hong-hua(闫宏华)
2
Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming
LI Yi(李 毅), WANG Zhong-Jin(王忠金)
3
Quasi-static-dynamic formability of AA5052-O sheet under uniaxial and plane-strain tension
LIU Da-hai(刘大海), YU Hai-ping(于海平), LI Chun-feng(李春峰)
4
Grain refining and property improvement of AZ31 Mg alloy by hot rolling
MIAO Qing(苗 青), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), WANG Er-de(王尔德)
5
Effects of solution treatment and aging process on microstructure refining of semi-solid slurry of wrought aluminum alloy 7A09
WU Xin(吴 欣), HAN Fei(韩 飞), WANG Wei-wei(王卫卫)
6
Effect of heat treatment on mechanical properties of thixoformed 7A09 aluminum alloy
WANG Wei-wei(王卫卫), JIA Bin-bin(贾彬彬), LUO Shou-jing(罗守靖)
7
Microstructural evolution of spray-formed Al-11.5Zn-2.0Mg-1.6Cu alloy during hot-extrusion and heat-treatment
GUO Shu(郭 舒), NING Zhi-liang(宁志良), CAO Fu-yang(曹福洋), SUN Jian-fei(孙剑飞)
8
Mechanical properties and texture evolution during
hot rolling of AZ31 magnesium alloy
SUN Hong-fei(孙宏飞), LIANG Shu-jin(梁书锦), WANG Er-de(王尔德)
9
Effect of Al and Zn additives on grain size of Mg-3Ni-2MnO2 alloy
FANG Wa(房 娃), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌), WANG Bin(王 彬)
10
Fabrication and microstructure of nanostructured Mg-3Ni-2MnO2 by ball milling in hydrogen atmosphere
FANG Wen-bin(房文斌), FANG Wa(房 娃), SUN Hong-fei(孙宏飞), YU Zhen-xing(于振兴)
11
Hydriding and microstructure nanocrystallization of ZK60 Mg alloy by reaction milling in hydrogen
YUAN Yuan(袁 媛), WANG Heng(王 珩), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌)
12
Mechanical behaviour of Al/Al2O3 composite in pseudo-semi-solid state during isothermal compression
CHENG Yuan-sheng(程远胜), LUO Shou-jing(罗守靖)
13
Effects of extrusion deformation on mechanical properties of sub-micron Si3N4p/2024 composite
XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), LIU Yan-mei(刘艳梅),
YANG Wen-shu(杨文澍), WU Gao-hui(武高辉)
14
Microstructure and thermal conductivity of  submicron Si3N4 reinforced 2024Al composite
YANG Wen-shu(杨文澍), XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), WU Gao-hui(武高辉)
15
Nonlinear temperature characteristic of thermal expansion of Grf/Mg composites
SONG Mei-hui (宋美慧), XIU Zi-yang(修子扬), WU Gao-hui(武高辉), CHEN Guo-qin(陈国钦)
16
Optimization of processing parameters for preparation of
Al-3Ti-1B grain refiner
LI Bao(李 豹), WANG Hong-wei(王宏伟), ZHAO Rui-feng(赵瑞峰), WEI Zun-jie(魏尊杰)
17
Influence of processing parameters on coating surface roughness of aluminum alloy
PAN Ming-qiang(潘明强), CHI Guan-xin(迟关心), WEI Dong-bo(韦东波), DI Shi-chun(狄士春)
18
Hydroforming of AZ61A tubular component with various cross sections
TANG Ze-jun(汤泽军), HE Zhu-bin(何祝斌), LIU Gang(刘 钢) YUAN Shi-jian(苑世剑), HU Lan(胡 蓝)
19
Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy
SU Yan-qing(苏彦庆), LIU Xin-wang(刘鑫旺), ZHAO Long(赵 龙),
WANG Liang(王 亮), GUO Jing-jie(郭景杰), FU Heng-zhi(傅恒志)
20
Effect of electropulsing on anisotropy behaviour of cold-rolled commercially pure titanium sheet
WANG Zhong-jin(王忠金), SONG Hui(宋 辉)
21
Microstructure and mechanical properties of Ti6Al4V/Cu-10Sn bronze diffusion-bonded joint
ZHAO He(赵 贺), CAO Jian(曹 健), FENG Ji-cai(冯吉才)
22
Superplastic forming of Ti6Al4V alloy using ZrO2-TiO2 ceramic die with adjustable linear thermal expansion coefficient
JIANG Shao-song(蒋少松), ZHANG Kai-feng(张凯峰)
23
Effect of hydrogen content and stress state on  room-temperature mechanical properties of Ti-6Al-4V alloy
YUAN Bao-guo(袁宝国), LI Chun-feng(李春峰), YU Hai-ping(于海平), SUN Dong-li(孙东立)
24
Superplastic formability of Ti-6Al-4V butt-welded plate by
 laser beam welding
WANG Gang(王 刚), ZHANG Wen-cong(张文丛), ZHANG Gong-lei(张功磊), XU Zhi-liang(徐志良)
25
Micro electrical discharge machining of small hole in TC4 alloy
LI Mao-sheng(李茂盛), CHI Guan-xin(迟关心), WANG Zhen-long(王振龙),
WANG Yu-kui(王玉魁), DAI Li(戴 立)
26
Microstructure evolution of as-cast Nb-Ti-C alloys
WEI Wen-qing(魏文庆), WANG Hong-wei(王宏伟), GAO Zeng-xin(高增新), WEI Zun-jie(魏尊杰)
27
Properties of vacuum cast CuCr25 and CuCr25Te contact material
XIU Shi-xin(修士新), YANG Ren(杨 韧), XUE Jun(薛 军), WANG Jin-xing(汪金星)
28
Fabrication and thermo-physical properties of TiB2p/Cu composites for electronic packaging applications
CHENGuo-qin(陈国钦), XIU Zi-yang(修子扬), MENG Song-he(孟松鹤),
WU Gao-hui(武高辉), ZHU De-zhi(朱德志)
29
Effect of extrusion ratio on coating extrusion of Pb-GF composite wire by numerical simulation and experimental investigation
WANG Xin(王 欣), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌)
30
Multiscale simulation and nanoindentation experimental study of initial plasticity of Fe single crystal
YUAN Lin(袁 林), SHAN De-bin(单德彬), GUO Bin(郭 斌)
31
Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings
ZHAO Guo-liang(赵国亮), WEN Guang-wu(温广武), WU Kun(吴 昆)
32
Influence of voids on interlaminar shear strength of carbon/epoxy fabric laminates
ZHU Hong-yan(朱洪艳), LI Di-hong(李地红), ZHANG Dong-xing(张东兴),
WU Bao-chang(吴宝昌), CHEN Yu-yong(陈玉勇)
33
Effect of preparation conditions on selective oxidation of propane to acrylic acid
YU Zhen-xing(于振兴), ZHENG Wei(郑 伟), XU Wen-long(徐文龙),
ZHANG Yu-hang(张宇航), FU Hong-ying(付红英), ZHANG Ping(张 平)
34
a novel one-step method to synthesize copper nitrate hydroxide nanorings
Wang Xin-bo(王新波), Huang Long-nan(黄龙男)
35
Flow field simulation of double layer atomizer
ZHAO Wen-jun(赵文军), CAO Fu-yang(曹福洋), NING Zhi-liang(宁志良), SUN Jian-fei(孙剑飞)
36
Factors governing heat affected zone during wire bonding
SUN Li-ning(孙立宁), LIU Yue-tao(刘曰涛), LIU Yan-jie(刘延杰)
37
Temperature and stress fields of multi-track laser cladding
ZHAO Hong-yun (赵洪运), ZHANG Hong-tao(张洪涛), XU Chun-hua(徐春华), YANG Xian-qun(杨贤群)
38
An evaluation analysis method for corrosion morphology
characterization based on Gaussian filter
ZHANG Peng (张 鹏), GUO Bin (郭 斌), CHENG Shu-kang (程树康)
39
Effect of thickness and grain size on material behavior in micro-bending
SHAN De-bin(单德彬), WANG Chun-ju(王春举), GUO Bin(郭 斌), WANG Xin-wei(汪鑫伟)
40
Effects of specimen size on flow stress of micro rod specimen
WANG Chun-ju(王春举), GUO Bin(郭 斌), SHAN De-bin(单德彬), SUN Li-ning(孙立宁)
41
Flow stress and tribology size effects in scaled down cylinder compression
GUO Bin(郭 斌), GONG Feng(龚 峰), WANG Chun-ju(王春举), SHAN De-bin(单德彬)
42
Micro precision casting based on investment casting for micro structures with high aspect ratio
YANG Chuang(杨 闯), LI Bang-sheng(李邦盛), REN Ming-xing(任明星), FU Heng-zhi(傅恒志)
43
Surface finish ­­of micro punch with ion beam irradiation
XU Jie(徐 杰), WANG Chun-ju(王春举), GUO Bin(郭 斌),
SHAN De-bin(单德彬), Y. SUGIYAMA, S. ONO
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)