ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 19    Sepecial 1    September 2009
1
Review of micromachining of ceramics by etching
H. T. TING, K. A. ABOU-EL-HOSSEIN, H. B. CHUA
2
Optimum condition by mechanical characteristic evaluation infriction stir welding for 5083-O Al alloy
Min-Su HAN, Seung-Jun LEE, Jae-Cheul PARK, Seok-Cheol KO, Yong-Bin WOO, Seong-Jong KIM
3
Friction stir welding of 5052 aluminum alloy plates
Yong-Jai KWON, Seong-Beom SHIM, Dong-Hwan PARK
4
Surface treatment to improve corrosion resistance of
Al plate heat exchangers
Jong-Soon KIM, Tae-Ho KANG, In-Kwan KIM
5
Influence of cutting parameters on surface characteristics of cut section in cutting of Inconel 718 sheet using CW Nd:YAG laser
Dong-Gyu AHN, Kyung-Won BYUN
6
Mechanical and electrochemical characteristics evaluation in annealing treatment for ship material
Seok-Ki JANG, Young-Jae JEONG, Seong-Jong KIM
7
Electrochemical characteristics and surface morphology in non-chromate chemical conversion coating for Zn-electroplated steel sheets
Masazumi OKIDO, Ryoichi ICHINO, Seok-Ki JANG, Seong-Jong KIM
8
Corrosion characteristics of steel in seawater containing various chloride concentrations generated by electrochemical method
Seong-Jong KIM, Seok-Ki JANG
9
Effect of annealing on two different niobium-clad stainless steel PEMFC bipolar plate materials
Sung-Tae HONG, Dae-Wook KIM, Yong-Joo YOU, K. Scott WEIL
10
Numerical simulation of temperature field in plasma-arc flexible forming of laminated-composite metal sheets
SONG Wen-qing(宋文庆), XU Wen-ji(徐文骥), WANG Xu-yue(王续跃),
MENG Jian-bing(孟建兵), LI Hong-you(李洪友)
11
Densification simulation of compacted Al powders using multi-particle finite element method
Kyung-Hun LEE, Jung-Min LEE, Byung-Min KIM
12
Influence of CaO on damping capacity and
mechanical properties of Mg alloy
Dong-In JANG, Jin-Kyu LEE, Dae-Up KIM, Shae-K KIM
13
Gas sensitivity of indium oxide
HUANG Shi-zhen, LIN Wei, CHEN Wen-zhe
14
Electrodeposited Ni, Fe, Co and Cu single and
multilayer nanowire arrays on anodic aluminum oxide template
Bobomurod HAMRAKULOV, In-Soo KIM, M. G. LEE, B. H. PARK
15
Synthesis and microstructure of zirconia nanopowders by glycothermal processing
Jun-Seop KIM, Dong-Hae LEE, Sung KANG, Dong-Sik BAE, Hoy-Yul PARK, Moon-Kyeung NA
16
Synthesis and characterization of Ba(CoxNb1−x)O3 nanoparticles byhydrothermal processing
Hyun-Ju KIM, Min-Cheol CHU, Seong-Jai CHO, Dong-Sik BAE
17
Synthesis and characterization of metallic Pd embedded TiO2 nanoparticles by reverse micelle and sol-gel processing
Jeoung-Ho JIN, Min-Cheol CHU, Seong-Jai CHO, Dong-Sik BAE
18
Characterization of MnWO4 with flower-like clusters produced
using spray pyrolysis
Somchai THONGTEM, Surangkana WANNAPOP, Titipun THONGTEM
19
Silica gel-assisted solvothermal production of CdS, CuxS (x=1, 2) and
 ZnS with different morphologies
Titipun THONGTEM, Chalermchai PILAPONG, Somchai THONGTEM
20
Environmentally friendly hybrid coating prepared by electro-deposition method at various seawater conditions
Myeong-Hoon LEE, Kyung-Man MOON, Jong-Do KIM, Kang JUN, Kwang-Ho KIM
21
Comparative study on discharge conditions in micro-hole electrical discharge machining of tungsten carbide (WC-Co) material
Hyun-Seok TAK, Chang-Seung HA, Dong-Hyun KIM,
Ho-Jun LEE, Hae-June LEE, Myung-Chang KANG
22
Antistatic coating material consisting of
poly (butylacrylate-co-styrene) core-nickel shell particle
Min-Yeong JEONG, Byung-Yoon AHN, Sang-Koul LEE, Won-Ki LEE, Nam-Ju JO
23
Detection of stacking orientation error of CFRP composite laminates using ultrasound waves
Sun-Kyu KIM, David HSU, Young-Hwan SEO, Kwang-Hee IM
24
Mechanical properties of high-strength concrete subjected to high temperature by stressed test
Gyu-Yong KIM, Young-Sun KIM, Tae-Gyu LEE
25
Evaluation of properties of concrete using fluosilicate salts and metal (Ni, W) compounds
Gyu-Yong KIM, Eui-Bae LEE, Bae-Su KHIL, Seung-Hun LEE
26
Strain measurement of fiber optic sensor surface bonding on host material
Shiuh-Chuan HER, Chang-Yu TSAI
27
Three-dimensional machining of insulating ceramics materials with electrical discharge machining
Yasushi FUKUZAWA, Naotake MOHRI, Hiromitsu GOTOH,Takayuki TANI
28
Influence of process parameters on drilling characteristics of Al 1050 sheet with thickness of 0.2 mm using pulsed Nd׃YAG laser
Dong-Gyu AHN, Gwang-Won JUNG
29
Influence of tool deflection on micro channel pattern of 6׃4 brass with rectangular tool
Tae-Jin JE, Kang-Won LEE, Sang-Cheon PARK, Jae-Gu KIM, Doo-Sun CHOI,
Kyoung-Taik PARK, Kyung-Hyun WHANG
30
Sub-micron-structure machining on silicon by femtosecond laser
Hung-Yin TSAI, Shao-Wei LUO, Chih-Wei WU, Shing-Hoa WANG
31
Rapid manufacturing of SiC molds with micro-sized holes using abrasive water jet
Bo-Sung SHIN, Kang-Su PARK, Yeon-Kyoung BAHK, Sun-Ki PARK, Jung-Han LEE,
Jeung-Sang GO, Myung-Chang KANG, Cha
32
Measurement of metal vapor cooling speed during nanoparticle formation by pulsed wire discharge
Yuu SHIKODA, Yoshinori TOKOI, Koji SUWA, Satoru ISHIHARA, Tsuneo SUZUKI,
Tadachika NAKAYAMA, Hisayuki SUEMATSU
33
Laser micromachining of CNT/Fe/Al2O3 nanocomposites
Kwang-Ryul KIM, Byoung-Deog CHOI, Jun-Sin YI, Sung-Hak CHO, Yong-Ho CHOA,
Dong-Soo SHIN, Dong-Ho BAE, Myung-
34
Characteristics of machined surface controlled by cutting tools and conditions in machining of brittle material
Yong-Woo KIM, Soo-Chang CHOI, Jeung-Woo PARK, Deug-Woo LEE
35
Structural stability estimation of whirling unit
Son-Jae HWAN, Han-Chang WOO, Lee-Sang RYONG, Lee-Young MOON
36
Cutting force signal pattern recognition using hybrid neural network in end milling
Song-Tae SEONG, Ko-Tae JO, Young-Moon LEE
37
Optimization of image capturing method of wear particles for condition diagnosis of machine parts
Yon-Sang CHO, Heung-Sik PARK
38
Analysis and optimization of nitrile butadiene rubber sealing mechanism of ball valve
Xue-Guan SONG, Lin WANG, Young-Chul PARK
39
Ultrasonic vibrating system design and tool analysis
Kei-Lin KUO
40
Effective tool design of three-rank form as precision removal-process of ITO thin-films
Pai-shan PA
41
Dynamic simulation of universal spacer in Dynesys dynamic stabilization system for human vertebra
Sung-Min KIM, In-Chul YANG, Seung-Yeol LEE, Sung-Youn CHO
42
Easy calibration method of vision system for in-situ measurement of strain of thin films
Jun-Hyub PARK, Dong-Joong KANG, Myung-Soo SHIN, Sung-Jo LIM,
Son-Cheol YU, Kwang-Soo LEE, Jong-Eun HA, Sung-H
43
Uniform surface polished method of complex holes in abrasive flow machining
A-Cheng WANG, Lung TSAI, Kuo-Zoo LIANG, Chun-Ho LIU, Shi-Hong WENG
44
Structural optimization for ball valve made of CF8M stainless steel
Xue-Guan SONG, Seung-Gyu KIM, Seok-Heum BAEK, Young-Chul PARK
45
Voltage-induced material removal mechanism of copper for electrochemical-mechanical polishing applications
Sang-Jun HAN, Yong-Jin SEO
46
Development of single-action, two-step clinching system using finite element analysis
Seong-Wook LEE, Tae-Hyung KIM, Geun-Jo HAN
47
Stud welding for fixation of cryogenic insulation of
membrane tanks in LNG ship building
Jeong-Soo LEE, Young-Soo RYU, Nam-In KIM, Bong-Joon KIM, Yoo-Kyung KIM, Myung-Hyun KIM
48
Crushing behavior of lightmass structural member
Kil-Sung LEE, Yong-June YANG, Woo-Chae HWANG, In-Young YANG
49
Attaching single carbon nanotube on tip’s apex
 using dielectrophoresis of DC-pulse voltage
Hee-Jin JEONG, Yoong-Ho JUNG, Deug-Woo LEE
50
Application of direct laser metal tooling for AISI H13 tool steel
Jae-Ho LEE, Jeong-Hwan JANG, Byeong-Don JOO, Hong-Sup YIM, Young-Hoon MOON
51
Machining characteristics of complex prism pattern on
 electroplated roll by copper
Tae-Jin JE, Sang-Cheon PARK, Kang-Won LEE, Yeong-Eun YOO, Doo-Sun CHOI,
Kyung-Hyun WHANG, Myung-Chang KANG
52
Characteristics of damaged layer in micro-machining of copper material
Dong-Hee KWON, Jeong-Suk KIM, Myung-Chang KANG, Se-Hun KWON, Jong-Hwan LEE
 
53
Nano-precision combined process of electrolytic in-process dressing grinding and magnetic assisted polishing on optics glass material
Tae-Soo KWAK, Yong-Chul LEE, Gyung-Nyun KIM, Dae-Bong CHOI,
Mikio YAMANOI, Hitoshi OHMORI
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)