ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 13    Sepecial 1    May 2003
1
Diffusion bonding of Al alloy to Al2O3 ceramic
FENG Ji-cai(冯吉才), WANG Da-yong(王大勇),
LI Zhuo-ran(李卓然), LIU Hui-jie(刘会杰)
2
Determination of elastoplastic properties of individual phase in solidified Al brazed joint
QIAN Yi-yu (钱乙余), GAO Feng(高 峰), Dusan P. Sekulic, 
MA Xin(马 鑫), F. Yoshida
3
Diffusion behavior of silicon at interface of
Al clad sheet and joint formation
Dusan P. Sekulic,GAO Feng(高 峰),
QIAN Yi-yu (钱乙余), ZHAO Hui(赵 惠)
4
Friction stir welding of AA5083 aluminum alloy
LIU Hui-jie(刘会杰), H. Fujii (藤井英俊),
M. Maeda(前田将克), K. Nogi(野城清)
5
Effect of YF3 on weld microstructure and performance of titanium
alloy TC4 in TIG welding
YANG Chun-li(杨春利), LIN San-bao(林三宝),
ZHANG Qing-tao(张清涛)
6
Interface structure and shear strength of brazed joints of TiAl-based alloy to middle-carbon steel
FENG Ji-cai(冯吉才), LIU Hui-jie(刘会杰)
7
Laser beam welding of TA2 titanium sheet
CHEN Yan-bin(陈彦宾), LI Li-qun(李俐群),
ZHOU Shan-bao(周善宝), LEI Zheng-long(雷正龙)
8
Microstructure and composition characteristics of transition zone in diffusion bonding of Fe3Al intermetallics to Q235 low carbon steel
WU Hui-qiang(吴会强), FENG Ji-cai(冯吉才),
LI Ya-jiang(李亚江), WANG Juan(王 娟)
9
Optimization design of electromagnetism induction heating technical parameters in high frequency induction brazing
HE PENG(何 鹏), FENG Ji-cai(冯吉才), LIU Hui-jie(刘会杰),
HAN Jie-cai(韩杰才), LIU Le-chang(刘乐昌)
10
Vacuum brazing of TiB2 cermet to TiAl-based alloys using Ag-Cu-Zn filler metal
LI Zhuo-ran(李卓然), FENG Ji-cai(冯吉才), CAO Jian(曹 健)
11
Scratching brazing of SiC fibre reinforced
 aluminum matrix composite
ZHANG Li-xia(张丽霞), FENG Ji-cai(冯吉才), LI Zhuo-ran(李卓然),
 LIU Hui-jie(刘会杰), SUN Hua-yin(孙华银)
12
New technology for brazing aluminum clustered tube of refrigerator
HE Peng(何 鹏), FENG Ji-cai(冯吉才), YU Ze-xing(余泽兴), 
JIA Jin-guo(贾进国), MAI Han-hui(麦汉辉)
13
Reaction kinetics of hydrogen absorption for Mg-based hydrogen-storage materials
WANG Er-de(王尔德), ZHANG Wen-cong(张文从),
YU Zhen-xing(于振兴), FANG Wen-bin(房文斌),
SUN Zhi-jie(孙志杰)
14
Phase transformation rate in hydrogen absorption of magnesium-based materials
ZHANG Wen-cong(张文从), FANG Wen-bin(房文斌),
YU Zhen-xing(于振兴), ZHAO Guo-liang(赵国亮),
WANG Er-de(王尔德), SUN Zhi-jie(孙志杰)<
15
Crystallization of high stable Zr55Al10Ni5Cu30bulk amorphous alloy
SHEN Jun (沈 军), SUN Jian-fei (孙剑飞), GAO Yu-lai (高玉来),
WANG Gang (王 刚), XING Da-wei (邢大伟),
CHEN De-Min (陈德民), ZHOU Bi-de (周彼德)
16
Effect of Sn addition on thermal stability of (Zr52.5Ti5Al10Ni14.6Cu17.9)(100-x)Snx alloys
SUN Jian-fei(孙剑飞), SHEN Jun(沈 军), GAO Yui-lai(高玉来),
ZHU Zhen-ye(朱振业), XING Da-wei(邢大伟),
WANG Gang(王 刚),CHEN De-min(陈德民)
17
Effect of Ti addition on supercooled liquid region and glass forming ability of
bulk amorphous Zr60Cu20Ni10-xAl10Tix alloys
XING Da-wei(邢大伟), SUN Jian-fei(孙剑飞),
LIU Yu-qiang(刘玉强),WANG Gang(王 刚),
YAN Ming(严 明), SHEN Jun(沈 军)
18
Effect of temperature on high temperature plasticity of 95W-5(Ni/Fe/Co) alloy
WANG Er-de(王尔德), FANG Wen-bin(房文斌),
HU Lian-xi(胡连喜), YU Yang(于 洋)
19
Microstructure and mechanical properties of high density tungsten alloy and
its influence factors
FANG Wen-bin(房文斌), WANG Er-de(王尔德),
HU Lian-xi(胡连喜), YU Yang(于 洋), CHEN She-wei(陈社伟)
20
Preparation of nanoscale Li2O-Al2O3-SiO2glass-ceramic by polyacrylamide gel method
WU Song-quan(吴松全), HE Li-na(何利娜),
WANG Fu-ping(王福平), LEI Ting-quan(雷廷权)
21
TiC phase in Ti alloys at different temperatures
FANG Wen-bin(房文斌), WEI Zun-jie(魏尊杰),
WANG Hong-wei(王宏伟), ZENG Song-yan(曾松岩)
22
Granulation of primary dendritic TiC in TiC/Ti composite
JIN Yun-xue (金云学), ZENG Song-yan (曾松岩),
ZHANG Cheng-jun (张成军)
23
Semi-solid microstructure and its evolution of LC9 aluminum alloys prepared with directly heating-isothermal treatment method
WANG Wei-wei(王卫卫), SONG Jian-li(宋建丽), HAN Fei(韩 飞)
24
Nucleation mechanism for grain refinement
 in A357 alloy by Al-Ti-B master alloys
ZHU Zhao-jun(朱兆军), ZENG Song-yan(曾松岩),
GUO Li-wei(郭立伟), WANG Hong-wei(王宏伟)
25
Counter-pressure casting control system for
large thin-wall aluminum alloy components
MA Xu-liang(马旭梁), ZHU Zhao-jun(朱兆军),
FANG Wen-bin(房文斌), ZENG Song-yan(曾松岩)
26
Squeeze casting technique for fabricating SiCp/Al composites with lower volume 
fractions of SiC particles
QU Shou-jiang (曲寿江), CAO Guo-jian (曹国剑),
GENG Lin (耿 林), LEI Ting-quan (雷廷权)
27
Technology of centrifugal casting for
titanium alloy
TIAN Jing(田 竞), XIAO Shu-long(肖树龙),
CHEN Yu-yong(陈玉勇), CHEN Zi-yong(陈子勇)
28
Temperature field numerical simulation of
induction skull melting process
CHEN Zi-yong(陈子勇), SHU Qun(舒 群), XU Li-juan(徐丽娟),
TIAN Jing(田 竞), CHEN Yu-yong(陈玉勇)
29
Thermodynamic parameter calculation and evaporation behavior of
elements in Ti-Al-V alloys
CHEN Zi-yong(陈子勇), XU Li-juan(徐丽娟), SHU Qun(舒 群),
KONG Fan-tao(孔凡涛), CHEN Yu-yong(陈玉勇)
30
Microstructure evolution in cast Ti-37Al alloys with B additions
GAO Wen-li(高文理), ZHANG Hu(张 虎),
 ZHANG Er-lin (张二林), 
ZENG Shong-yan (曾松岩)
31
Effects of heat treatment on dual phase structure carbides in Ti-34Al matrix composite
WANG Hong-wei(王宏伟), FANG Wen-bin(房文斌),
WEI Zun-jie(魏尊杰), ZENG Song-yan(曾松岩)
32
Grain and lamellar refinement in TiAl based alloy by yttrium addition
KONG Fan-tao(孔凡涛), CHEN Zi-yong(陈子勇),
TIAN Jing(田 竞) , CHEN Yu-yong(陈玉勇)
33
Deformation behavior of sheet metals and viscous medium in viscous pressure bulging process with back viscous pressure
WANG Zhong-jin(王忠金), LIU Jian-guang(刘建光),
WANG Zhong-ren(王仲仁), LV Jun (吕 军)
34
Molecular dynamics simulation of bending crack initiation and growth of single crystal aluminium
SHAN De-bin(单德彬), YUAN Lin(袁 , 林), GUO Bin(郭 斌)
35
Hydraulics numerical simulation on filter purification of molten metal
GENG Yao-hong(耿耀宏), FANG Wen-bin(房文斌),
YANG Yi-tao(杨弋涛),YE Rong-mao(叶荣茂),AN Ge-ying(安阁英)
36
High temperature compression behavior of Al2O3 particle reinforced 6061aluminum alloy composite
LUAN Bo-feng((栾伯峰), WU Gao-hui(武高辉), SUN Dong-li(孙东立)
37
Numerical simulation of wrinkling in hydroforming of aluminum alloy tubes
YUAN Shi-jian(苑世剑), LIU Gang(刘 钢), LANG Li-hui(郎利辉)
38
Effect of properties of sheet metal on 
shear stress wrinkling
CUI Ling-jiang(崔令江), ZHANG Wen-cong(张文从)
39
Laser forming thin aluminum sheets
LI Li-qun(李俐群), CHEN Yan-bin(陈彦宾),
LIN Shang-yang(林尚扬)
40
Magnetic pressure in electromagnetic aluminum tube-compression forming
YU Hai-ping(于海平), LI Chun-feng(李春峰),
ZHAO Zhi-heng(赵志衡),LI Zhong(李 忠), JIANG Hong-wei(江宏伟)
41
Microstructure of hot-pack rolled
Ti-43Al-9V-0.3Y alloy
CHEN Yu-yong(陈玉勇), KONG Fan-tao(孔凡涛),
CHEN Zi-yong(陈子勇), TIAN Jing(田 竞)
42
Variation of mechanical properties and microstructures of Al-Pb mixed powder during mechanical milling
HE Wen-xiong(贺文雄), FANG Wen-bin(房文斌),
WANG Er-de(王尔德), HAN Fei(韩 飞)
43
Extrusion process of lead-clad glass fiber composites
SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌),
HAN Fei(韩 飞),HE Wen-xiong(贺文雄),WANG Er-de(王尔德)
44
Properties of lead-clad glass fiber composites
SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌),
HAN Fei(韩 飞),XING Cheng-bo(刑成波),
HE Wen-xiong(贺文雄),WANG Er-de(王尔德)
45
Cup-drawing process of BT20 titanium alloy
CHEN Yu(陈 宇), KANG Da-chang(康达昌), XU Yong-chao(徐永超)
46
Microforming of superplastic
2091Al-Li alloy
WANG Chang-li(王长丽), ZHANG Kai-feng(张凯锋), DING Shui(丁 水)
47
Superplasticity in magnesium-based composite
ZHAO Min(赵 敏), WU Kun(吴 昆),
YAN Feng(严 峰), YANG De-zhuang(杨德庄)
48
Effect of rare earth on kinetics of pulse plasma nitriding of pure aluminum and properties of nitrided layer
YAN Mu-fu(闫牧夫)
49
Effect of gas pressure on residual stresses
in AlN films deposited on Al substrates
TIAN Jing(田 竞), XUE Xiang(薛 祥),
Takao Hanabusa, Kazaya Kusaka
50
Influence of sintering on physical properties of high-carbon copper matrix 
pantograph slider sinters
GUO Bin(郭 斌), JIN Yong-ping(金永平),
WANG Er-de(王尔德), SHAN De-bin(单德彬)
51
Tribological properties of Ti-Al-N films prepared by plasma-based ion implantation mixing
SUN Yue (孙 跃), TANG Guang-ze(唐光泽), MA Xin-xin(马欣新)
52
Oxidation behavior of Ti2AlC/TiAl composites
WEI Zun-jie(魏尊杰), WANG Hong-wei(王宏伟),
FANG Wen-bin(房文斌), ZENG Song-yan(曾松岩)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)