ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 18    No. 3    June 2008

Structural Materials

1
Oxidation of pre-oxidized GH128 alloy implanted with Ce+ at 1 000 ℃
LI Mei-shuan(李美栓), QIAN Yu-hai(钱余海), , ZHOU Yan-chun(周延春)
2
Effect of stress ratio on long life fatigue behavior of Ti-Al alloy under flexural loading
XUE Hong-qian(薛红前), TAO Hua(陶 华), SHAO Ren-ping(邵忍平), B. CLAUDE
3
Influence of hydrogenation on microstructures and microhardness of Ti6Al4V alloy
ZHAO Jing-wei(赵敬伟), DING Hua(丁 桦), ZHAO Wen-juan(赵文娟),TIAN Xue-feng(田学锋), HOU Hong-liang(侯红亮), WANG Yao-qi(王耀奇)
4
Effects of Nb and Si on high temperature oxidation of TiAl
JIANG Hui-ren(姜惠仁), WANG Zhong-lei(王中雷), MA Wen-shuai(马文帅),FENG Xiao-ran(冯晓然), DONG Zi-qiang(董自强), ZHANG Liang(张 亮), LIU Yong(刘 咏)
5
Wettability of TiAl alloy melt on ceramic moulds in electromagnetic field
LI Bang-sheng(李邦盛), LIU Ai-hui(刘爱辉), NAN Hai(南 海),BI Wei-sheng(毕维生), GUO Jing-jie(郭景杰), FU Heng-zhi(傅恒志)
6
Effect of properties of SiC fibers on longitudinal tensile behavior of SiCf/Ti-6Al-4V composites
LI Jian-kang(李建康), YANG Yan-qing(杨延清), YUAN Mei-ni(原梅妮),LUO Xian(罗 贤), LI Li-li(李丽丽)
7
Hot deformation of spray formed nickel-base superalloy using processing maps
KANG Fu-wei(康福伟), , ZHANG Guo-qing(张国庆), LI Zhou(李 周), SUN Jian-fei(孙剑飞)
8
Microstructure refinement of AZ91D alloy solidified with pulsed magnetic field
WANG Bin(汪 彬), YANG Yuan-sheng(杨院生), ZHOU Ji-xue(周吉学), TONG Wen-hui(童文辉)
9
Effect of processing way and aging treatment on properties and microstructures of 7B04 aluminum alloy
LI Nian-kui(李念奎), LÜ Xin-yu(吕新宇), CUI Jian-zhong(崔建忠)
10
Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique
A. K. LAKSHMINARAYANAN, V. BALASUBRAMANIAN
11
Microstructure characteristics and mechanical properties of rheoformed wrought aluminum alloy 2024
GUO Hong-min(郭洪民), YANG Xiang-jie(杨湘杰), ZHANG Meng(张 萌)
12
Using friction stir processing to produce ultrafine-grained microstructure in AZ61 magnesium alloy
DU Xing-hao(杜兴蒿), WU Bao-lin(武保林)
13
Effects of holding temperature and time on semi-solid isothermal heat-treated microstructure of ZA84 magnesium alloy
YANG Ming-bo(杨明波), , PAN Fu-sheng(潘复生), CHENG Ren-ju(程仁菊), SHEN Jia(沈 佳)
14
Effect of local chilling on morphology of primary α(Al) in semi-solid A356 alloy
LIU Zheng(刘 政), , MAO Wei-min(毛卫民), ZHAO Zhen-duo(赵振铎)
15
Effects of microstructure on creep behavior of Mg-5%Zn-2%Al(-2%Y) alloy
ZOU Hong-hui(邹宏辉)
16
Corrosion behavior of Mg and Mg-Zn alloys in simulated body fluid
GAO Jia-cheng(高家诚), , WU Sha(伍 沙), QIAO Li-ying(乔丽英), , WANG Yong(王 勇)
17
Phase selection of ternary intermetallic compounds during solidification of high zinc magnesium alloy
GUAN Shao-kang(关绍康), ZHANG Chun-xiang(张春香), WANG Li-guo(王利国),WU Li-hong(吴立鸿), CHEN Pei-lei(陈培磊), TANG Ya-li(汤亚力)
18
Oxidation of Al2O3-dispersion chromizing coating by pack-cementation at 800 ℃
ZHOU Yue-bo(周月波), CHEN Hong-yu(陈洪玉), ZHANG Hai-jun(张海军), WANG Yong-dong(王永东)
19
Structure and sliding wear behavior of 321 stainless steel/Al composite coating deposited by high velocity arc spraying technique
CHEN Yong-xiong(陈永雄), XU Bin-shi(徐滨士), LIU Yan(刘 燕), LIANG Xiu-bing(梁秀兵), XU Yi(许 一)

Functional Materials

20
Crystallization kinetic characteristics of oxygen-induced I-phase and Zr2Cu phase in Zr65Cu27.5Al7.5 glassy alloy
HE Lin(贺 林), HAN Zhen-hua(韩振华), JIANG Feng(江 峰), SUN Jun(孙 军)
21
Effect of Zn addition in Sn-rich alloys on interfacial reaction with Au foils
LIU Wei(刘 威), WANG Chun-qing(王春青), TIAN Yan-hong(田艳红), CHEN Ya-rong(陈雅容)
22
Piezoelectric and dielectric properties of Lix(K0.46Na0.54)1−xNb0.86Ta0.1Sb0.04O3 lead-free ceramics
CHEN Zhi-wu(陈志武) , HU Jian-qiang(胡建强)
23
Preparation and bioactivity of SiO2 functional films on titanium by PACVD
CHENG Xiao-min(程晓敏), NIE Bang-min(聂邦民), S. KUMAR
24
HA coating on titanium with nanotubular anodized TiO2 intermediate layer via electrochemical deposition
WANG Yue-qin(王月勤), TAO Jie(陶 杰), WANG Ling(王 玲),HE Ping-ting(何娉婷), WANG Tao(汪 涛)
25
Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant
YU He-long(于鹤龙), XU Yi(许 一), SHI Pei-jing(史佩京),XU Bin-shi(徐滨士), WANG Xiao-li(王晓丽), LIU Qian(刘 谦)
26
Preparation and characterization of La-Co alloy nanowire arrays by electrodeposition in AAO template under nonaqueous system
GONG Xiao-zhong(龚晓钟), TANG Jiao-ning(汤皎宁), LI Jun-qing(李均钦), LIANG Yong-kang(梁永康)
27
Preparation of YAG׃Ce3+ phosphor by sol-gel low temperature combustion method and its luminescent properties
YAN Xing-huang(严星煌), ZHENG Song-sheng(郑淞生), YU Rui-min(于瑞敏),CAI Jing(蔡 靖), XU Zhi-wei(许志伟), LIU Chun-jia(刘春佳), LUO Xue-tao(罗学涛)

Computational Materials Science

28
Numerical simulation for isothermal dendritic growth of succinonitrile-acetone alloy
CHEN Zhi(陈 志), CHEN Chang-le(陈长乐), HAO Li-mei(郝丽梅)
29
Finite element analysis of thermal residual stresses at cemented carbide rock drill buttons with cobalt-gradient structure
HUANG Zi-qian(黄自谦), HE Yue-hui(贺跃辉), CAI Hai-tao(蔡海涛),XIAO Yi-feng(肖逸锋), HUANG Bai-yun(黄伯云)
30
Elasto-plastic finite element analysis of squaring circular tube
HUANG Yuung-ming(黄永明)
31
Numerical simulation of influence of material parameters on splitting spinning of aluminum alloy
HUANG Liang(黄 亮), YANG He(杨 合), ZHAN Mei(詹 梅), HU Li-jin(胡莉巾)
32
Numerical simulation on rheo-diecasting mould filling of semi-solid key-shaped component
BAI Yue-long(白月龙), , MAO Wei-min(毛卫民), XU Jun(徐 骏),XU Hong(徐 宏), HOU Hua(侯 华)
33
Numerical simulation of jet breakup due to amplitude-modulated (A-M) disturbance
LUO Jun(罗 俊), QI Le-hua(齐乐华), , LI Li(李 莉),YANG Fang(杨 方), JIANG Xiao-shan(蒋小珊)
34
Numerical simulation of thermal behavior during laser metal deposition shaping
LONG Ri-sheng(龙日升), , LIU Wei-jun(刘伟军), XING Fei(邢 飞), , WANG Hua-bing(王华兵),
35
Numerical calculation of magnetization behavior for Co nanowire array
ZHONG Ke-hua(钟克华), HUANG Zhi-gao(黄志高), CHEN Zhi-gao(陈志高),FENG Qian(冯 倩), YANG Yan-min(杨艳敏)

Mine Engineering, Metallurgical Engineering and Ch

36
Bioleaching of low-grade copper sulphides
YIN Sheng-hua(尹升华), WU Ai-xiang(吴爱祥), QIU Guan-zhou(邱冠周)
37
Effect of salinity and acidity on bioleaching activity of mesophilic and extremely thermophilic bacteria
H. DEVECI, M. A. JORDAN, N. POWELL, I. ALP
38
Anodization of AZ91 magnesium alloy in alkaline solution containing silicate and corrosion properties of anodized films
LI Ling-ling(李玲玲), CHENG Ying-liang(程英亮), WANG Hui-min(王慧敏), ZHANG Zhao(张 昭)
39
Vapor pressure and thermochemical properties of ZrCl4 for ZrC coating of coated fuel particles
LIU Chao(刘 超), LIU Bing(刘 兵), SHAO You-lin(邵友林),LI Zi-qiang(李自强), TANG Chun-he(唐春和)
40
Chemical kinetic studies on interfacial reaction in SCS-6 SiC/Ti matrix composites
ZHU Yan(朱 艳), , , YANG Yan-qing(杨延清), WANG Yao-yu(王尧宇)
41
Self-assembly synthesis, crystal structure and nonlinear optical properties of cluster compound containing PPh2Py ligand
ZHOU Jian-liang(周建良), WEI Chuan-jun(位传军), TONG Hai-xia(童海霞),CHUN Xiao-gai(春晓改), CHEN Qi-yuan(陈启元)
42
Influence of AlF3 and hydrothermal conditions on morphologies of α-Al2O3
FU Gao-feng(付高峰), WANG Jing(王 晶), KANG Jian(康 健)
43
Assessing environmental impact of magnesium production using Pidgeon process in China
GAO Feng(高 峰), NIE Zuo-ren(聂祚仁), WANG Zhi-hong(王志宏),GONG Xian-zheng(龚先政), ZUO Tie-yong(左铁镛)
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU)